Decorative Wall Vent Covers 8x26

To measure your size correctly, remove the existing vent cover and measure the size of the duct. The duct opening size is what should be ordered. The Ribbon grille is a resin (polyurethane) decorative vent cover that is light in weight yet sturdy and strong. Grilles are unfinished and ready for you to primer and paint to achieve the perfect color for your setting. Each grille is made using a casting process that allows for a three-dimensional look. Grilles will not rust and are not prone to corrosion which makes them excellent for high-humidity areas and dry areas alike. Ribbon grilles are flat on the back and have no inserts. Grilles should not be used on the floor and are only for wall and ceiling applications for central air conditioning and heating systems. Due to the nature of the curing process, grilles can vary very slightly in size so please take the measurements as an approximate size. All grilles should be installed using the provided screws to ensure a safe application. Please note, that these grilles are intended to be primed/painted and will come in an off-white beige color.

Pefect for painting and worked perfectly. Brittany. Midlothian, VA. Sat Jul 18 2026

Surface mount PVC gable vents are not only long-lasting, durable, and easy to install, they instantly add tremendous value and character to the exterior of a home. Upon arrival, the PVC should be painted before installation with the exterior color of your choosing. PVC gable vents are available in a functional option, to allow air flow, and in a non-functional option, if you want to simply enhance the architectural features of your home. Keep the traditional look of an exterior gable vent, without the downsides of traditional wood, by ordering PVC gable vents.

Sturdy construction, but was hoping to have more air movement (slant opening is kind of small (1/4 -3/8" width). It does look nice on our 1918 barn that we are restoring.. Harold. Kansas. Mon Jul 17 2023

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

Cover the fireplace in an elegant style with this Alkiviadis Grille. This grille is constructed from iron, which makes it sturdy and durable. It has a traditional style that makes it look good with most kinds of home decor. The grill has a beautiful pattern and stylish appeal that makes it attractive and great for covering a fireplace or air vents on the walls. This grate requires a 10”x 12.13” opening and fits easily in it. The louvers are available separately if required. This Alkiviadis Grille is a perfect addition that blends functionality and style together.

I needed a cool looking vent cover for the wall in my crazy bathroom and this was the only cool one that would fit that I could find. Of course it didnt come in the gold color I needed so I just painted it. It worked perfectly and I love how it looks. Eva. Glen Allen, VA. Tue Sep 09 2025

Modern geometric detailing makes this Appert register a seamless accent to any space. Made of steel and covered with a corrosion-resistant finish, this product is as durable as it is stylish. Adjustable louvers control the direction of airflow easily.

Good quality. Looks very nice. Much better than the builders low quality vent it replaced.. Jill. Rancho Mirage, CA. Thu May 07 2026

Boasting a scrolled style, the Old Victorian Steel Floor/Wall Register invites traditional elegance to your home. Versatile in design, this model is compatible with both floor and wall installations and features removable louvers.

Very nice floor register.. Elizabeth. Lincoln, MA. Thu Apr 23 2026

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

The SteelCrest Distinction: This beautiful designer baseboard supply register, with air-volume damper, is made from solid, white powder coated, rust-resistant galvanized steel and is designed for timeless beauty and un-paralleled efficiency for your heating and cooling system.

This is a really beautiful register vent. Heavy constructed metal. . Nancy. Grove City, OH. Sun Sep 06 2020

Surface mount PVC gable vents are not only long-lasting, durable, and easy to install, but they instantly add tremendous value and character to the exterior of a home. Upon arrival, the PVC should be painted before installation with the exterior color of your choosing. PVC gable vents are available in a functional option, to allow airflow, and in a non-functional option if you want to simply enhance the architectural features of your home. Keep the traditional look of an exterior gable vent, without the downsides of traditional wood, by ordering PVC gable vents.

Perfect. Lisa. Ramer, TN. Mon Jun 22 2026

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

The period style scroll design makes this floor registers perfectly for any home restoration. Made of cast aluminum, they are rustproof and maintenance-free. Treated with a baked-on black powder coating each grille has a luxurious black finish and renovator's supply logo. Mounting hardware not included.

The vent cover is perfect for our project! We wanted a cast iron look to go above our pantry to provide some air circulation to the space. Love that this grate has the raised edge side like a cast iron vent and it's not just a flat piece of aluminum.. Dena. Spring, TX. Tue Oct 03 2023

Madelyn Carter Floor Registers or Wall Register Vent Cover: The Madelyn Carter Floor Registers or wall registers are a stylish and durable option for your home's air ventilation. This air vent cover is made from high-quality material, making it strong and long-lasting. These designs are perfect for modern homes, and the registers come in a variety of finishes and sizes to match your decor. They are easy to install and will fit most standard floor ducts. Upgrade your home's ventilation system with the Madelyn Carter Floor Registers. High-quality Vebt Covers for Wall: Combining quality materials and innovative design, these heat vent covers complement modern, clean designs in any space. It includes sturdy adjustable dampers and a beautiful, long-lasting finish that lasts for years. Control your airflow and elevate your home with this register. Specification: Brand: Madelyn Carter Item Name: Wall Vent Covers Number of Pieces: 1 Special Features: Easy to Install and replaceable Strong Vent Cover: Durability reigns supreme with Cast Brass, Cast Iron, Cast Aluminum, and Steel options, and the heavy-duty metal dampers, this floor register cover boasts strength and longevity. You can use this vent cover in high-traffic areas of your home or office without worrying about dents from furniture, or rust.

High quality and easy to install. Megan. Old Hickory, TN. Tue Sep 29 2026

Stellar Air decorative air intake covers are Magnetic and are made to replace the unattractive exhaust fan covers in your living space. Our unique designs will enhance the room by adding wall art to your hall, living room, ceiling or any space of your house. We transform eyesore air filter covers into beautiful wall decor. Our unique “snap in“ magnetic design means our vent covers can be easily installed without any drilling or headaches. You just have to remove your old ugly metal grill and snap in our Stellar Air vents. We include a new metal frame box, in case you need it and to guarantee a perfect fit. Please order by filter size behind the grill or the duct opening, measure correctly and do not measure your existing cover.

Darlene. Bowie, MD. Wed Jun 17 2026

Stellar Air decorative air intake covers are Magnetic and are made to replace the unattractive exhaust fan covers in your living space. Our unique designs will enhance the room by adding wall art to your hall, living room, ceiling or any space of your house. We transform eyesore air filter covers into beautiful wall decor. Our unique “snap in“ magnetic design means our vent covers can be easily installed without any drilling or headaches. You just have to remove your old ugly metal grill and snap in our Stellar Air vents. We include a new metal frame box, in case you need it and to guarantee a perfect fit. Please order by filter size behind the grill or the duct opening, measure correctly and do not measure your existing cover.

It added a custom look to my air conditioner vent.. Rhonda. Somerville, AL. Tue Jun 30 2026

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

The CleanVent Tropical Pattern Refer to how to measure guide below to find your vent sizing. The ceiling vent is one of the most overlooked details in a room: the CleanVent sits flat to the ceiling making it part of the ceiling not an obstruction. The CleanVent brings a hint of design to your ceiling, eliminating the cluttered look of vents protruding into a flat ceiling. The CleanVent is a magnetic, screw-less, retrofit vent cover: featuring hidden air flow tabs. It is easily repositioned when installed, which can fix the problem of improper installed, crooked or misaligned vents. The CleanVent attaches via magnets screwed into the vent box itself, pulling the vent box tight to the ceiling which can eliminate vent sweating. Easily removed for cleaning and painting. Each CleanVent is manufactured in the USA out of .040 5052-H32 aluminum, (not plastic). The CleanVent and defusing screen are powder-coated in gloss white and can be painted. The Inner air flow tabs are .040 stainless steel and can be positioned in any direction. Please note the CleanVent sizes are for inside vent measurements, the overall size of the CleanVent is 1-1/2 inches bigger on all 4 sides for the frame around the vent opening. Example a 6 x 6 vent overall size is 9 x 9, which gives plenty of room for covering up ceiling stains and crooked installed vents.

Exactly what I needed for our very modern home. Easy to install and works very well. A bit of a wait on shipping, but well worth it. Yesha. Makawao, HI. Tue Jul 07 2026

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

The SteelCrest Distinction: This beautiful designer supply vent is made from solid, white powder coated, rust-resistant galvanized steel and is designed for timeless beauty and un-paralleled efficiency for your heating and cooling system.

The registers are really pretty and add a specialness to the walls. Well made.. Linda. Decatur, GA. Mon May 30 2022

Stellar Air decorative air intake covers are Magnetic and are made to replace the unattractive exhaust fan covers in your living space. Our unique designs will enhance the room by adding wall art to your hall, living room, ceiling or any space of your house. We transform eyesore air filter covers into beautiful wall decor. Our unique “snap in“ magnetic design means our vent covers can be easily installed without any drilling or headaches. You just have to remove your old ugly metal grill and snap in our Stellar Air vents. We include a new metal frame box, in case you need it and to guarantee a perfect fit. Please order by filter size behind the grill or the duct opening, measure correctly and do not measure your existing cover.

Packaged well, easy to install Looks great, leaving natural to work with our wood finish wall, best part is wife is very happy!. Calvin Vander. Statesville, NC. Wed Jan 15 2025

Madelyn Carter Floor Registers Or Wall Register Vent Cover: The Madelyn Carter Floor Registers or wall registers are a stylish and durable option for your home's air ventilation. This air vent cover is made from high-quality material, making it strong and long-lasting. These designs are perfect for modern homes, and the registers come in a variety of finishes and sizes to match your decor. They are easy to install and will fit most standard floor ducts. Upgrade your home's ventilation system with the Madelyn Carter Floor Registers. High-Quality Vent Covers For Wall: Combining quality materials and innovative design, these heat vent covers complement modern, clean designs in any space. It includes sturdy adjustable dampers and a beautiful, long-lasting finish that lasts for years. Control your airflow and elevate your home with this register. Strong Vent Cover: Durability reigns supreme with Cast Brass, Cast Iron, Cast Aluminum, and Steel options, and the heavy-duty metal dampers, this floor register cover boasts strength and longevity. You can use this vent cover in high-traffic areas of your home or office without worrying about dents from furniture, or rust.

We love it! The color was perfect and excellent quality. Georgina. NC. Tue Jun 23 2026

Add natural beauty to any interior or exterior project with distinct western red cedar or Douglas fir. Rustic wood brackets, corbels, rafter tails, and outlooks will contain unique colors, grains, textures, knots, sapwood & heartwood content, and possible sap bleeding, and even natural checking, splitting & natural cracks. These variations are what make the Rustic Collection stand out from the rest. Stand out from the cookie-cutter homes; by using any product from Ekena's Rustic Collection.

very well made but heavy. Also there are no mounting instructions or hardware.. Terri. Leesburg, VA. Wed Apr 06 2022

The steel crest distinction: this beautiful designer fixed return grille is made from solid, white powder-coated, rust-resistant galvanized steel and is designed for timeless beauty and unparalleled efficiency for your heating and cooling system.

Love the design and quality of these registers. They are well made with a heavy material and even finish. Purchased these for my 125year old home and they look great with the overall character and charm of the home!. Bethany. Knoxville, IL. Sun Mar 14 2021

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom—and every room in between—your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your individual style, we’ll make every step of the process as seamless and worry-free as possible.

Looks nice and fits perfectly.. Patricia. Princeton, OR. Thu Dec 11 2025

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 standard steel countersink screws. Decorative brass screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: It is ¾” thick and designed to sit FLUSH on this sized hardwood floors. We also accept custom made orders to your specific thickness. Please contact us directly. The register comes integrated with a box unit that makes installation easy. Our registers DO NOT come with louvers or dampers box to control airflow. Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"x12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"x14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"x12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"x14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic vent ½” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.