Crib Replacement Parts Wheels

Office chair 3" castor wheels replacement rubber pu chair casters for hardwood floors and carpet, set of 5, heavy duty office chair - universal fit.

Great casters, very strong, gliding very smooth. Replaced my office chair after 20 yrs with these new casters, very satisfied and so are my wooden floors.. Anonymous. Sun May 17 2026

Listing is for one (1) Service Caster Series #20 swivel caster with a 5" diameter by 1-1/4" wide soft rubber wheel and 1-1/2" diameter x 2-11/16" length expanding stem. Supports up to 275 lbs. per caster. 190TA25CSTR replacement part fits Advance Tabco work tables and equipment stands.

The 4 casters replace the legs on the appliance to make your machine portable. Simply screw the casters into the holes below each corner of the machine. Each caster has a locking lever, which locks the appliance in place once it has been moved to the desired position. This safety feature prevents the machine from moving or rolling around.

A revolutionary upgrade for smooth and gliding office chairs. Our rollers are made of highly resilient polyurethane (PU) with a steel base and sealed ball bearings to ensure a non-marking, silent glide on hard floors, tiles and carpets. Universal 7/16" x 7/8" size stem, compatible with most office chairs, load-bearing capacity up to 650lb, durable and not easy to deform. It is the ideal choice for your new roller or replacement of old wheels.

Zach. Grapevine, TX. Thu May 28 2026

High quality replacement swivel caster set for a Chemtainer cst60rbs. Listing is for four (4) Service Caster series swivel casters and a 6 inch diameter by 2 inch wide thermoplastic rubber flat tread wheels with plastic thread guards. Supports 500 pounds (lbs.) Per caster.

Listing is for one (1) Service Caster Series #20 1-3/8" expanding stem 316 stainless steel swivel caster with a 3" diameter by 1-1/4" wide gray polyurethane wheel and a total locking brake capable of supporting 300 lbs./caster.

This set of brass casters is made of high-quality brass, plastic, and iron with a physical polishing treatment process. The workmanship is exquisite, with a delicate touch and fine texture. The universal wheels can rotate 360 degrees in multiple directions, so they can meet different moving requirements without much effort.

These were the perfect wheels to replace lost wheels on an antique hutch.. Sarah. North Venice, FL. Sun Mar 22 2026

The Next Generation First Responder Evacuation Hardware Kit converts the Next Gen Serenity crib (1st generation) into a safe and effective evacuation crib. The red, solid steel three-point gusset plate design combines with the Serenity crib’s SafeSupport steel box frame with center mattress support, providing superior strength and durability. Premium 4” non-marking casters will not damage floors. Evacuation kit includes four red gusset plates and four 4” casters. Compatible with first generation Serenity Cribs only.

I recently purchased replacement wheels for my crib, and they have been a great improvement. The wheels were easy to install and fit perfectly. Since adding them, the crib feels much more stable and secure when being moved. They roll smoothly without wobbling and provide better support than the original wheels. Overall, I am very satisfied with this purchase and would recommend these wheels to anyone looking to improve the stability and mobility of their crib.. Anonymous. Fri Jun 12 2026

Listing is for one (1) 3" diameter thermoplastic rubber wheel and a 1-5/8" diameter x 2-11/16” length expanding adapter stem. Supports up to 110lbs.

Use these wheels to mobilize this Desk Models 1201BE, 1202BE, 1203GR, 1204GR, 1206BE, 1207BE, 1208GR and 1209GR (sold separately). Sturdy nylon construction.

Nice but I have to return wrong size. Karen. Wed Jun 17 2026

Listing is for five (5) 2-1/2" diameter metal ball light furniture and fixture casters with 7/16" diameter x 1-7/16" length grip ring stem and bright chrome finish. Supports up to 100 lbs. per caster.

Listing is for one (1) 3" diameter thermoplastic rubber wheel and a 1-1/2" diameter x 2-11/16” length expanding adapter stem. Supports up to 110lbs.

Listing is for one (1) Service Caster Series #20 swivel caster with a 4" diameter by 1-1/4" wide polyolefin wheel and 1/2" diameter x 1-1/2" length threaded stem. Supports up to 300 lbs. per caster. AP263270 263270 replacement part fits a variety of food service applications.

Listing is for (1) one 3" diameter unhooded twin wheel nylon chair, light furniture and fixture casters with a 7/16" diameter x 7/8" length grip ring stem. Supports up to 165 lbs. per caster.

Listing is for (4) four 2" diameter flat black hooded twin wheel nylon chair, light furniture and fixture casters with a 1-1/2" diameter x 1-1/2" length top plate. Supports up to 75lbs per caster or 300 lbs. total.

Listing is for one (1) Service Caster Series #20 swivel caster with a 5" diameter by 1-1/4" wide hard rubber wheel and .845" diameter x 2" length grip ring stem. Supports up to 300 lbs. per caster. 359PLCB5140 replacement part fits Regency and Metro utility carts.

The listing is for one (1) service caster series #35 swivel caster with a 4" diameter by 2" wide nylon wheel with a side lock brake & bolt-on swivel lock capable of supporting 800 lbs./caster.

Our office chair wheel replacements are floor-protecting and stylish. The rubber allows you to roll around on wood, tile, and carpet floors without damaging the floors. Enjoy smooth and quiet rolling with full swivel action. You no longer are in need of plastic mats to protect your beautiful floors with our heavy-duty product. These casters are universal so feel free to take all your wheels to the next level.

They are strong. Great styling. Ez to install. Fast delivery too! Thanks for everything as always. Wayfair comes thru again!!!. Carol. New York, NY. Mon Aug 31 2026

The wheels are engineered to evenly distribute weight, preventing tipping or uneven movement. Designed for maximum convenience and control, these front wheels transform the way you move your Packout toolbox. With 360° rotation, ergonomic design, and durable steel construction, this upgrade makes transportation smoother, easier, and more efficient How to Install 1 Twist the shock-absorbing foot pad into the longer base. Adjust the foot pad until it is securely fastened to the toolbox. (Place in the center position) 2 Align the screw holes and cover the shorter base. 3 Tighten the screws at the four corners. 4 Front wheel installation completed. Specification: Color:Black Material:stainless steel Mounting Type: Plate Mount Gross Weight:0.7KG/1.54lbs Outer package size:4.53"x3.94"x2.36"/11.5x10x6cm Package Including 1pcs packout caster wheel

Easy to install and well built. Works well and makes movement of Milwaukee packouts easy for a change. Well worth the money.. Carlos. Ventura, CA. Fri Jan 30 2026

Extend the life of your Winston 4-in-1 crib and provide years of additional use by converting your crib into a beautiful full-size bed. The conversion rails are finished with the same multi-step staining process and matching the hardware to ensure that the Winston crib seamlessly transitions into any room in your home.

These were easy to install and are holding up nicely not just for my daughter but also for snuggly story times and the occasional sleepover with mom or dad!. Emma. Oshawa, ON. Thu Aug 06 2026

Listing is for one (1) Service Caster Series #20 swivel caster with a 3" diameter by 1-1/4" wide thermoplastic rubber wheel and a 1/2" threaded stem with brake capable of supporting 210 lbs./caster.

Listing is for one (1) Service Caster Series #20 swivel caster with a 3" diameter by 1-1/4" wide thermoplastic rubber wheel and a 5/8" threaded stem with brake capable of supporting 210 lbs./caster.

Convert your full-size crib into a full-size bed or your mini crib into a twin bed with these wooden rails

Bought the crib years ago and forgot to buy these convertible to bed pieces. Thank goodness Wayfair still had them. They fit perfectly and was able to make my convertible crib into a full size bed! Came with all parts needed. Andrea. Northern Ca. Tue Mar 24 2026

Listing is for one (1) Service Caster Series #20 swivel caster with a 3" diameter by 1-1/4" wide thermoplastic rubber wheel and a 1/2" threaded stem with brake capable of supporting 210 lbs./caster.

Listing is for four (4) 2" diameter spherical polyolefin wheel light furniture and fixture casters with brakes and 7/16" diameter x 7/8" length grip ring stem and hooded windsor antique finish. Supports up to 75lbs/caster.

Listing is for a set of four (4) Service Caster Series #KP30 casters, two (2) swivel casters with side lock brakes and two (2) rigid casters, with 5" diameter by 2" wide rubber on aluminum wheels capable of supporting a total weight of 2,000 lbs. (500 lbs./caster).

Take your Rolli 9-in-1 All-Stages® Convertible Crib to the next level with the Rolli All-Stages® Midi Crib conversion kit. With the parts and hardware included in this kit, you'll unlock three additional conversion stages to get full usage of your Rolli crib as your babe grows. The Rolli All-Stages® Midi Crib conversion kit will help transform your Rolli crib into a Midi crib, Midi Toddler Bed, and Midi Daybed, making the transition from bassinet to standard crib a cinch!

Listing is for a set of four (4) Service Caster Series #20 316 stainless steel swivel bolt hole casters, four (4) swivel casters with 3” diameter by 1-1/4” wide thermoplastic rubber wheels. Supports a total weight of 840lbs (210lbs/per caster).

Listing is for five (5) 2-1/2" diameter metal ball light furniture and fixture casters with 7/16" diameter x 1-7/16" length grip ring stem and bright chrome finish. Supports up to 100 lbs. per caster.

High quality replacement caster set for Regency U-Boat utility carts. Listing is for two (2) Service Caster 8 inch diameter by 2 inch wide heavy duty non-marking maroon polyurethane tread on gray polyolefin core wheels and four (4) Service Caster Series #20 swivel casters with 4 inch diameter by 1-1/4 inch wide blue polyurethane tread on gray polyolefin core wheels. Set includes two (2) replacement wheels, two (2) replacement swivel casters, and two (2) replacement swivel casters with brakes. The wheels support 1,000 pounds (lbs.) per wheel and the casters support 350 pounds (lbs.) per caster for a total capacity of 3,200 pounds (lbs.) when used together. Use this Service Caster replacement caster set to do a full replacement on your Regency U-Boat utility cart.

This heavy-duty replacement caster wheels for bed frame set of 4 (2 locking and 2 none locking). Bed wheels provide an easy replacement solution. Plastic plug inserts included.

The coasters on my trundle bed broke and I bought these to replace them. Worked well and seem very functional.. Sharon. Spartanburg, SC. Fri Jan 26 2024

Listing is for one (1) Service Caster Series #20 swivel caster with a 4" diameter by 1-1/4" wide black polyurethane wheel and a 7/16" grip ring stem with total lock brake capable of supporting 350 lbs./caster.

Listing is for four (4) 3" diameter neoprene rubber wheel with brakes and 5/16" diameter x 1-1/2" length grip neck stem, socket for 3/8” x 1-5/8” wood hole and hooded bright chrome finish. Supports up to 110lbs per caster.

Listing is for a set of four (4) Service Caster Series #30 stainless steel casters, two (2) swivel casters with side lock brakes & bolt on swivel locks and two (2) rigid casters, with 5" diameter by 2" wide solid polyurethane wheels capable of supporting a total weight of 4,000 lbs. (1,000 lbs./caster).

Listing is for a set of four (4) Service Caster Series #KP30 swivel casters with 4" diameter by 2" wide polyurethane on polyolefin wheels with side lock brakes and bolt on swivel locks capable of supporting a total weight of 2,400 lbs. (600 lbs. per caster).

Listing is for one (1) Service Caster Series #20 swivel caster with top lock brake and a 3" diameter by 1-1/4" wide polyolefin wheel and 1/2" diameter x 1-1/2" length threaded stem. Supports up to 250 lbs. per caster. AP263284 263284 replacement part fits a variety of food service applications.

Listing is for a set of four (4) Service Caster Series #20 1-1/8" expanding stem 316 stainless steel swivel casters with 5" diameter by 1-1/4" wide nylon wheels capable of supporting a total weight of 1,200 lbs. (300 lbs./caster.).

Listing is for one (1) Service Caster Series #20 swivel caster with a 4" diameter by 1-1/4" wide black polyurethane wheel and a 7/16" grip ring stem with total lock brake capable of supporting 350 lbs./caster.

Listing is for one (1) Service Caster Series #20 1-3/8" expanding stem 316 stainless steel swivel caster with a 3" diameter by 1-1/4" wide gray polyurethane wheel and a total locking brake capable of supporting 300 lbs./caster.

Listing is for one (1) Service Caster Series #20 1-3/8" expanding stem 316 stainless steel swivel caster with a 3" diameter by 1-1/4" wide gray polyurethane wheel and a total locking brake capable of supporting 300 lbs./caster.

Listing is for one (1) Service Caster Series #20 swivel caster with a 3" diameter by 1-1/4" wide thermoplastic rubber wheel and a 3/4" threaded stem with brake capable of supporting 210 lbs./caster.

Listing is for (5) five 2" diameter flat black hooded twin wheel nylon chair, light furniture and fixture casters with a 1-1/2" diameter x 1-1/2" length top plate. Supports up to 75lbs per caster or 375 lbs. total.