Yellow 2 Gang 1 Decoratorrocker1 Duplex Wall Plate Art Plates Or140

Printed stainless steel metal plate with screws only. (Electrical components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Perfect match to my wall!. Anonymous. Tue Jun 24 2025

To make a wall plate, two pieces of glass are cut, cleaned, stacked together and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a waterjet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

To make a wall plate, two pieces of glass are cut, cleaned, stacked together, and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a water jet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

Beautiful ! Very classy looking.. Amy. Merced, CA. Fri May 05 2023

To make a Wall Plates, two pieces of glass are cut, cleaned, stacked together, and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a waterjet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot Knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

A collection of wall plates with reproductions of award-winning illustrations at the Ilustrarte biennial, signed by some of the best international designers.

You cannot go wrong with anything by Vista Alegre. Their range of designs by independent artists is sure to satisfy any style and taste. Exquisite quality and craftsmanship.. Gabriela. Wilmington, NC. Mon Oct 11 2021

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Good quality switch plate. Nice and colorful, paint does not chip off and durable metal. Comes with screws needed.. Lori. Saginaw, MI. Wed May 15 2024

To make a Wall Plates, two pieces of glass are cut, cleaned, stacked together and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a waterjet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot Knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

To make a wall plate, two pieces of glass are cut, cleaned, stacked together and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a water jet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

The theme in my kitchen is sunflowers. You can never have enough sunflowers in your kitchen! These blend beautifully with the decor and look so bright and pretty replacing my old boring black switchplates.. Cher. Santee, CA. Thu Apr 30 2026

These Plates are an ideal way to express unique style and taste. Each plate can be hung alone or in multiples with the included bracket. This plate is a combination of cool color, designed to complement any decor. A center of green gives way to a sunburst of amber that blends back into green. Its outside edge is rich azure blue, edged in black. Dual rings of red spots, outlined in green and black overlay the green and blue for a dazzling effect. Not just for walls, these plates can be displayed as a centerpiece on a dining or coffee table; this manufacturer's creativity is limited only by their imagination.

I purchased this 12”x12” bowl to be part of an art piece with other glass bowls, also from Wayfair. Our new home has a large inset in the dining room that’s unique for an art display. The previous owners had mounted framed photos, but I imagined the blown glass bowls. I chose other different bowl colors and sizes on the Wayfair site (all of which were accurate as depicted). Then, I cut circles from construction paper using the posted dimensions for each bowl to use as templates before I purchased all the bowls. I used tape to move them around until I found the color scheme and symmetry I liked. Then, I ordered the bowls. Mounting was not difficult, just a pencil, anchor bolts, a hand drill, and a partner who did all the mounting while I supervised! The most challenging part was the planning. We absolutely love the resulting art display.. Donna. Houston, TX. Sat May 10 2025

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Maureen. Maryland City, MD. Sun May 15 2022

Printed stainless steel metal plate with screws only. (Electrical components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Brenda. Billerica, MA. Fri Aug 26 2022

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

My kitchen has a sunflower theme, and this sunflower switch plate cover matches perfectly with the decor.. Cher. Santee, CA. Thu Apr 30 2026

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.