White Diecast Tee Crank Handle Truth Primeline Th 22142

This duvet is made with soft, plush microfiber fill, a high quality polyester that's meant to mimic the softness of down. The shell is a crisp, durable 260 thread count cotton. Microfiber doesn't have the same insulating properties as down, so microfiber duvets are heavier weight. A fair bit of fill is required to achieve the desired warmth. One benefit of a synthetic duvet is that it can be machine washed at home, given your machine is quite large and you wash/dry on a low heat setting. Natural down and feather are sensitive to moisture, but polyester is not!

Very heavy, warm duvet. Great price. Highly recommend.. Heather. Woodside, NY. Sat May 02 2026

This operator crank handle is constructed of diecast zinc and comes in a baked-on enamel finish, engineered to resist rust and corrosion. It is designed for use on Truth brand casement and awning window operators with 11/32 inch spindles. This window crank features a set screw at the base of the handle allowing it to lock onto the spindle, and a swivel knob at the tip for ease of operation. The reach on this crank measures 2-9/16 inch and it has a 3-1/2 inch projection. This operator crank handle is easy to install, and it’s used by a variety of window manufacturers.

This is a white finish left-handed, 13-1/2 in. single arm operator. It is made of heavy-duty diecast zinc with the baked on white finish. The steel arm, worm drive and gears are protected with a corrosive resistant finish, and it opens to a full 90 degrees. The plastic roller on the end of the arm insure a smooth operation as it slides through the Prime-Line part TH 22397 track. When installing, the housing easily fastens down to the window sill.

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

This is a diecast crank handle that is used on the Truth Maxim casement operators. It extends out 3-3/32 in. from the operator housing. Ideal for low profile applications. Comes in a white finish.

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

Crafted with precision, the Legacy Handle Set boasts a sturdy diecast construction, ensuring durability and longevity. The diecast material not only adds strength to the handle but also exudes a touch of sophistication, making it a standout addition to your sliding glass door.

The quality of these was good, we ended up returning for a different size.. Hayley. San Marcos, CA. Fri Aug 14 2026

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

Just what we needed for my son’s windows!. Samantha. Erlanger, KY. Thu Aug 18 2022

This Prime-Line H 4320 is an awning crank handle is white diecast and has a 11/32 inch bore spindle. This fits most awning operators with a 11/32 inch bore spindle such as the universal Prime-Line parts H 3554 or H 3555. It offers excellent torque for easy opening and closing of windows. The crank handle projects out from the operator 3-1/2 inch.

This patio door handle set is a multi-point lock set that comes with a white right-handed inside handle and an upper body thumb turn. The inside handle mounts onto a mounting bracket that is installed onto the door. The outside handle is a white diecast pull that can be keyed with the Prime-Line part E 2000 cylinder. This set is often used on vinyl or wood patio doors. The set comes with a unique keeper and multi-point lock.

This sliding patio door keyed locking unit by Prime-Line Products is constructed of diecast and comes in a corrosion-resistant, white-painted finish. This locking device is designed to convert non-locking Prime-Line patio door handle sets (model number: C 1174, C 1176 and C 1178) to keyed locking handles. This lock features a 5-pin tumbler with 2 keys. The lock body is solid brass construction with a hardened break-away tailpiece. Use to replace damaged key cylinders in most surface mount handles.

This operator cover is constructed from diecast Zinc. It comes finished in a white finish and features a contemporary styling. This type of operator cover is designed to snap- on to the worm housing of Truth Entry Gard operator.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

These chain door guards are constructed of steel chains, diecast housings, plates, and keepers, and they come in optional plated finishes. These locks engage by allowing the bolts to slide into the keyed mechanisms to lock. They use B1 keyways, ILCO (1098M). These chain door locks allow doors to open only slightly for safe viewing and ventilation. Installation of these locks mounted out of children’s reach will help prevent them from opening doors to enter or exit into dangerous or off-limit areas. All installation fasteners are included, and the locks can be used on a variety of door types, on or beside the door casings.

Very nice looking and useful key system to setup child lock even if you are going out.. Anonymous. US. Thu May 18 2023

Designed to fit sliding glass doors with fits 3 ¹⁵/₁₆ inches Hole Spacing, and 1-1/4" to 2-1/4" Door Thickness (Fabrication: 4 hole patterns)

It’s good! The back part didn’t work on my door so had to use the old one. Quality I’m not sure how good it is, came a bit scratched already! Let see how well it holds up though!. Kamit. Vernon Hills, IL. Sun Dec 08 2024

This sliding patio door handle set is constructed of diecast materials and comes in a tan painted finish. The handle set is non-handed allowing it to be used on both left and right-handed patio sliding doors using 3-15/16 in. mounting hole centers. This handle set features a high profile handle and it is used to replace damaged or missing mortise/hook style handle sets on sliding glass doors. Installation instructions and all fasteners necessary for the installation of this handle set are included in packaging. The outside pull of this handle set can be converted to an outside locking pull using Prime-Line part E 2000. Product selection tip: besides matching the style and type of locking mechanism, the other main specification to match is the measurement of the mounting hole centers, from center-2-center. Note: due to numerous compatible options, the internal mortise lock body is not included with this item and must be purchased separately. See sample item; Prime-Line part E 2014.

These awning operators are constructed of high pressure diecast zinc and the case and crank come in a beautiful finish. Each operator features a simple detach clip which allows the operator to disengage from the sash's center hook for quick and easy window release. This awning operator mounts on the bottom window sill of crank out awning windows, and holds the sash open at the user's desired location. These operators replace others whose roto gears may have become worn and stripped, or the spline to which the hand cranks attach. Included with each is the operator, a crank, a sash hook and installation fasteners.

So easy to install. Looks so good!. Jessica. Santa Clarita, CA. Thu May 07 2026

Works well on the bathroom's pocket door.. Anonymous. Wed Apr 15 2026

This patio door handle is a surface with clamp latch style. Used exclusively by International Windows on their 950 series patio doors. It mounts on the door's inside frame and the clamp latch latches onto an extrusion (astragal) on the jamb. The clamp is unique due to its teeth like design. It has a 2-1/8 in. inside handle height. Mounting holes are 3 in. on center. It is non-handed and can be used on either right or left-handed doors. The outside handle is a non-keyed black flush mount made of extruded aluminum. Purchase Prime-Line part E 2000 to key this unit.

Anonymous. Tue Mar 26 2024

The Prime-Line Sliding Glass Door Handle Set is soundly constructed to ensure its reliability and overall longevity. The non-keyed replacement sliding door handle mounts on the inside frame of an older style door and latches onto an extrusion on the jamb. Easily convert the slide door handle replacement into a keyed cylinder lock to increase the handles functionality and security features. Constructed from diecast extruded aluminum, the sliding door handle replacement comes finished in a stylish finish with woodgrain accents. The handle is the ideal choice for the discerning homeowner looking to enhance their doors style and flair. The handle is a 2 inch tall inside handle. The latch clamp of the handle set has a 1/4 inch profile and 1/2 inch projection when in locked position.

Great fit so glad to be able to fix my door!!!. Judy. Memphis, TN. Sat Mar 04 2023

This sliding door handle set is constructed from die-cast and comes finished in white. It features inside and outside pulls with a thumb lever and a reversible handle. This handle set is mortise style and uses E-2000 to the key lock.

Perfect size replacement. Mary. US. Thu Jun 22 2023

The Larson Heavy-Duty Push-Button Handle is designed for solid core storm doors, delivering durability, convenience, and security in one sleek package. The push-button operation allows for effortless entry and exit, while the secure latch and keyed lock add extra protection. With a surface-mount design for quick installation and a weather-resistant finish for long-lasting performance, this handle is built to withstand the elements.

Work perfectly. Anonymous. Sun Jun 14 2026

This white finish patio door handle is a surface with hook latch style. Often found on older patio doors, it mounts on the door's inside frame and the hook latch catches the keeper mounted on the jamb.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

This patio door handle set has matching inside and outside pulls. It features a white finish that is non-handed and used by a variety of manufacturers. This is a low profile non-keyed handle set.

The Rockwell Modena sliding door handle set with offset keylock is only compatible with 1 ¾” thick doors with a 4-hole bore and a 3 15/16” distance between screw holes. Not compatible with doors with a 3-hole bore. It features a 10” long handle and an 11” escutcheon plate. Each set includes interior and exterior handles and escutcheon plates, thumb latch, mounting fasteners, keylock cylinder, and 2 keys. (Mortise lock is NOT included) Please help re-check your specifications to check fit prior to ordering as not all door setups are alike.

These fit our existing door and provide good security and the locking feature allows us to lock/unlock from outside.. Gregory. San Diego, CA. Tue Feb 25 2025

This is a white flush mounted handle and latch set used by many patio door manufacturers. It has a steel hook latch with 1 inch standard spacing. This handle set will fit a minimum door thickness of 15/16 inch and up to a maximum thickness of 1-1/8 inch. It is 5-11/16 inch long and 7/8 inch wide with 5-1/8 inch mounting holes. Made of diecast metal, the handles fit flush into the screen door frame with an inside automatic locking feature.

was easy to install.. Gerald. Sacramento, CA. Sat Jun 28 2025

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

This patio door handle set comes with an inside handle with a hardwood pull and white diecast body. It is non-handed and can be used on right or left-handed doors. It is used by many patio door manufacturers.

Anonymous. Sun May 17 2026

This patio door lock is constructed of a steel plunger bolt with a plastic knob and housing. Comes in a white finish. It features a 5/16 in. diameter bolt with a 3/8 in. throw. The mounting hole centers are 13/32 in. x 1-3/4 in. on center. This secondary lock provides increased security when ventilating or securing your sliding door or window. Mounts onto the lower face of the bottom rail and is simple to install with some minor drilling required.

Perfect! The handles are beautiful and were easy to put on. Great instructions. Karen. Hayden, ID. Fri Feb 02 2024

Do you have any vertical or horizontal sliding windows with loose-fitting, worn or missing locks? Besides adding a “new look” to your windows with a fresh set of locking hardware, these sash locks can help add peace of mind by restoring the security features on your sliding windows. These locks feature a design that allows them to lock single-hungs, double-hungs and some horizontal sliding windows. Each lock features a cam-type locking mechanism that mounts on the checkrail of the innermost sash and engages into the keeper that mounts onto the checkrail of the outermost sash. The upper, outermost sash on vertical sliding windows determines if it is a “single hung” or “double hung.” If the upper, outermost sash is non-movable, then it is a single hung window. A “double hung” window refers to both sash having the ability to slide up and down for ventilation purposes, and these sash locks can fit on both model types, in addition to some left/right horizontal sliding windows. The locks are constructed of diecast zinc and come in a corrosion-resistant, industry standard, white-painted finish to match other existing hardware that may already be in the home or office. Depending on the size of the sash, these locks can be used as singles or in pairs. Each set includes one lock, one keeper, installation fasteners and simple instructions. Installation of these locks is quick and easy and can be done with a simple handheld Phillips head screwdriver. Other design features include a 5/16 inch narrow keeper, cam-action fastening, and 2-1/4 inch mounting hole centers. Compare the style and dimensions of this lock to those required on your sliding windows and order yours today.

This Prime-Line H 3711 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3833 casement operator is constructed of a diecast housing and crank handle, with a 8 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

This is a right-handed diecast casement locking handle with an offset base found on many contemporary casement windows (as viewed for the inside looking out). The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge by 13/16 inch from the tip of the lock to the center of the mounting holes. This handle has mounting holes for the handle assembly and the keeper at 1-1/2 inch apart.

Surface-mounted closer is fully rust and weather resistant making it suitable for exterior use. A single torsion spring is ideal for swinging screen doors and pool gates up to 57 lbs. (26kg) with an adjustable closing speed. Neat, compact, and durable white-painted housing is made of diecast zinc. Reversible handing. Do not overtighten, turning past 4 hole positions will cause this item to fail.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Will get these installed shortly. We know these work as we had them in our old apartment. Glad that I found them.. Anonymous. Wed Aug 31 2022

Crafted with precision, the Legacy Handle Set boasts a sturdy brass construction, ensuring durability and longevity. The brass material not only adds strength to the handle but also exudes a touch of sophistication, making it a standout addition to your sliding glass door. ***MORTISE LOCK SOLD SEPERATELY

Good fit to replace knob replacements for sliding glass doors. This is my second order. Looks good and easy to install,. Edwina. Atlanta, GA. Wed Aug 12 2026

These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a retaining ring to add strength at the insertion point when the lock is engaged. These patio door pin locks are designed to secure the sliding door in place when in a closed or ventilating position. These lock pins include all installation fasteners and they are simple to install.

This is a heavy-duty pneumatic storm door closer for heavy weight wood or aluminum outswinging doors. It has a 1-1/2 in. barrel that is 10-3/8 in. long in a white finish. It comes complete with mounting brackets and attaching hardware. It has adjustable closing speed.

If you are looking to tailgate like a pro or spice up your next backyard party, our custom cornhole boards are perfect for you. In addition to providing endless fun at home, our cornhole game sets are incredibly portable and can be taken virtually anywhere. This means you can easily bring them on your next camping trip, to the big game, to the beach, the lake, or anywhere else you want to play corn hole. You can even set them up and play in a dorm room. All of our games are easy to store, transport and setup, so you can focus on more important things, like playing! Simply take them out of the box and start enjoying them right away. Our boards are ready for Tournament Play right out of the box! All of our designs are printed with UV Resistant Inks to prevent peeling and fading. Know that you will be getting the highest quality in custom cornhole. We take pride in our work so you can have the ultimate playing experience.

Awesome purchase. Was delivered quickly with no issues. Came out of the box ready to go. Worked out great for our Cornhole Tournament. Love it.. Richard. Averill Park, NY. Tue Jul 28 2026

This casement sash lock is constructed of diecast and comes in a white painted finish. It features 3 different strike plates for use with push-out and swing-in casement windows that are not operated with a standard crank-out operator. The steel rim strike (1 in. x 1-3/8 in.) and the diecast surface strike (1/2 in. x 2 in.) included with this item are used for swing-in casements commonly hung with steel butt hinges. The steel mortise strike (11/16 in. x 2-7/16 in.) is for use with push-out casements, also commonly hung with steel butt hinges. Some mortising may be required when installing the rim strike or mortise strike. All fasteners are included with lock hardware. These locks are used on old style wood casement windows.

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Thu Jul 17 2025

This Fix-A-Latch, strike plate repair kit is constructed of stamped steel and white plastic components, and it comes in a beautiful finish. This kit can be used to easily repair a door that fails to latch when it is closed. The kit includes a strike plate for use with a 1-3/8 inch thick interior door, and another for a 1-3/4 thick exterior door. The white plastic bases come with adhesive-back tape strips and installation fasteners for a quick and simple repair. Note: These Fix-A-Latch repair plates require a 1/8 inch clearance gap between the doorjamb and the closed door’s edge.

This stylish patio door handle set comes with matching inside and outside pulls with centered latch lever. They are reversible for left or right-handed doors and diecast powder coated white. A variety of sliding patio door manufacturers used this handle. This particular model operates the Prime-Line mortise latches E 2008, E 2009, E 2014 or E 2111, if you cannot find online an in-store associate can special order. To make a locking handle use Prime-Line part E 2145, or replace the outside handle with Prime-Line part C 1120.

Introducing the Involute Interlock Handle Set for Sliding Patio Doors – a synergy of refined style and exceptional functionality. Crafted to meticulous standards and designed for enduring performance, this handle set redefines your patio door experience. It effortlessly combines smooth operation with elegant aesthetics, ensuring each interaction is a testament to effortless elegance.

The product was ok... but missing a few pieces. We were able to make it work. The box was also pretty beat up by Fed Ex and left in a very weird location. Could have been a better experience.. Aubrie. Eliot, ME. Tue Aug 26 2025

Standard reversible surface mount for left or right-handed mortise-locking doors that have 3-15/16 on center mounting holes. The diecast inside pull has a wood handle, diecast thumb turn, and steel latch activator. The outside pull is diecast and keyed. A mortise lock is not included and is sold separately.

Very nice interior wood handle. Great quality.. Biserka. Burtonsville, MD. Sat May 25 2024

White Patio Door Handle Set with Cylinder Lock - 3-15/16” Screw Hole Spacing, Perfect Replacement for Sliding Glass Patio Doors