Wheel Bearing And Hub Assembly Rear Crs Nt512382

Listing is for one (1) Service Caster Series #100 heavy duty dual wheel swivel caster with 16" diameter, 5" wide pneumatic wheels, tapered bearings, a bolt on swivel lock, and a face contact brake. Supports 2440 pounds (lbs) per caster.

New 180050 SL20/31 2″ Dryer Support wheel Roller Bearing Kit for ADC American Dryer Company. Part number 180050 replaces ADC180050.

Listing is for one (1) service caster series #30 swivel caster with a 5" diameter by 2" wide rubber on aluminum wheel with a side lock brake & bolt on swivel lock capable of supporting 500 lbs./caster.

Listing is for one (1) service caster series #35 swivel caster with a 4" diameter by 2" wide rubber on aluminum wheel and a bolt on swivel lock capable of supporting 400 lbs./caster.

The listing is for a set of four (4) Service Caster series #35 casters, two (2) swivel casters with bolt-on swivel locks, and two (2) rigid casters, with 8" diameter by 2" wide thermoplastic rubber donut tread wheels capable of supporting a total weight of 2,400 lbs. (600 lbs./caster).

Listing is for one (1) Service Caster Series #94 super heavy duty swivel caster with a 12" diameter, 5" wide green polyurethane wheel, tapered bearings and a welded on swivel lock. Supports 6000 pounds (lbs) per caster.

Listing is for a set of four (4) Service Caster Series #20 casters, two (2) swivel 10MM threaded stem with brake casters and two (2) swivel casters, with 5” diameter by 1-1/2” wide semi steel cast iron wheels. Supports a total weight of 1,200lbs (300lbs/per caster).

Replace damaged or missing patio door rollers with this 1-1/4 inch plain back tandem roller assembly. Designed for a variety of sliding glass door manufacturers, it features two concave steel ball bearing wheels in a durable stamped steel housing. Each wheel has a 5/16 inch width with a steel inner race and ball bearings for smooth, quiet operation. The housing measures 1-1/32 inch tall, 11/16 inch wide, and 3-1/8 inch long, with a 1/4-20 threaded mounting hole on the back and an optional hole on top. Adjustable height allows precise alignment, though a mounting screw (1/4-20 inch) may need to be purchased separately. Ideal for DIY homeowners or contractors, this assembly restores effortless sliding door operation.

Listing is for one (1) service caster series #35 swivel caster with a 8" diameter by 2" wide thermoplastic rubber flat tread wheel with a side lock brake & bolt on swivel lock capable of supporting 600 lbs./caster.

The listing is for one (1) service caster series #30 swivel caster with a 6" diameter by 2" wide thermoplastic rubber donut tread on a polyolefin core wheel and a bolt-on swivel lock capable of supporting 500 lbs./caster.

Wheel Bearing Press Kit, 23 PCS FWD Bearing Puller Tools, for Front Wheel Drive Bearing Removal and Installation, Wheel Bearing Tool with Sliding Screw, Bushings, Sleeve Plates, Storage Case Widely Compatible Flexible Setup High-Hardness Screw Non-Damaging Operation Complete Kit with Storage Rust-Resistant Build Item Model Number: LX1005,Product Weight: 22.9 lbs/10.4 kg

The listing is for a set of four (4) service caster series #20 casters, four (4) swivel bolt hole casters with posi lock brakes, 4” diameter by 1-1/4” wide polyurethane wheels. Supports a total weight of 1,400 lbs (350 lbs/per caster).

Listing is for one (1) swivel caster with a thermoplastic rubber flat tread on polyolefin core wheel and a bolt on swivel lock capable of supporting 500 lbs./caster.

Listing is for a set of four (4) service caster series #35 casters, two (2) swivel casters with bolt on swivel locks and two (2) rigid casters, with 8" diameter by 2" wide thermoplastic rubber flat tread wheels capable of supporting a total weight of 2,400 lbs. (600 lbs./caster).

Listing is for a set of four (4) Service Caster Series #92 casters with 10" diameter, 3" wide black phenolic wheels. Set includes two (2) rigid casters and two (2) swivel casters fitted with side locking brakes and bolt on swivel locks. Supports 11600 total pounds (lbs) at 2900 pounds (lbs) per caster.

The listing is for one (1) Service Caster series #30 swivel caster with a 6" diameter by 2" wide thermoplastic rubber flat tread on polyolefin core wheel with a side lock brake & bolt on swivel lock capable of supporting 500 lbs./caster.

Listing is for one (1) service caster series #30 swivel caster with a 5" diameter, 2" wide thermoplastic rubber donut tread on polyolefin core wheel. Supports 350 pounds (lbs) per caster.

Listing is for a set of four (4) swivel casters with rubber on aluminum wheels with bolt on swivel locks capable of supporting a total weight of 1,600 lbs. (400 lbs. per caster).

Listing is for a set of four (4) service caster series #35 casters, two (2) swivel casters with side lock brakes and two (2) rigid casters, with 4" diameter by 2" wide rubber on cast iron wheels capable of supporting a total weight of 1,600 lbs. (400 lbs./caster).

The listing is for a set of four (4) service caster series #30 swivel casters with 6" diameter by 2" wide nylon wheelss with bolt-on swivel locks capable of supporting a total weight of 5,000 lbs. (1,250 lbs. per caster).

Listing is for one (1) Service Caster Series #20 swivel caster with a 3" diameter by 1-1/2" wide semi steel cast iron wheel and a 1/2" threaded stem with brake capable of supporting 300 lbs./caster.

Listing is for one (1) Service Caster Series #30 stainless steel swivel caster with a 6" diameter by 2" wide solid polyurethane wheel and a bolt on swivel lock capable of supporting 1,200 lbs./caster.

This car parking lock stands as a trustworthy guardian for your private parking space, protecting it from unauthorized access or encroachment. Featuring high-strength cold-rolled steel and a reinforced structure, it ensures sustained sturdiness. Its bright yellow color and reflective stripes deliver prompt visual cues, lowering collision risks effectively and serving as a reliable safety shield for your exclusive parking spot.

The listing is for a set of four (4) Service Caster series #35 casters, two (2) swivel casters with bolt-on swivel locks, and two (2) rigid casters, with 8" diameter by 2" wide rubber on aluminum wheels and maintenance free precision ball wheel bearings. Capable of supporting a total weight of 2,400 lbs. (600 lbs./caster).

Listing is for one (1) Service Caster series #35 swivel caster with an 8" diameter by 2" wide rubber on the aluminum wheel with a side lock brake & bolt-on swivel lock capable of supporting 600 lbs./caster.

Listing is for a set of four (4) service caster series #35 casters, two (2) swivel casters with side lock brakes and two (2) rigid casters, with 4" diameter by 2" wide thermoplastic rubber donut tread wheels capable of supporting a total weight of 1,200 lbs. (300 lbs./caster).

The Armor SX5000 WB is a PRO-Grade water-based penetrating water-repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 WB is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

I’ve got a fairly long and steep concrete driveway that is starting to show its age a little bit. There has been some minor cracking from the freeze-thaw cycle each winter. I decided to try the Armour SX5000 water-based sealant to see if it would improve the situation. I have delayed writing this review for a bit as I wanted to driveway to go through at least one winter season. I first pressure washed the entire driveway surface which is pretty time consuming. I then applied the Armour sealant with a manual pump sprayer. This part went fairly quickly. The trick is to get the sealant covering the driveway well, but not so much as to create puddles that aren’t absorbed. I made sure there was no rain in the forecast for a couple of days. Initially, I did half of the driveway first and the first day that it rained the difference on the two sides was very noticeable. Water on the coated side was beading and running off and on the other side it was being absorbed into the concrete. My driveway has now gone through two winters and the sealant is still somewhat effective, but I think I will need to coat it again this fall.. Bryan. Halifax, NS. Fri Mar 27 2026

Listing is for one (1) service caster series #30 swivel caster with a 5" diameter by 2" wide thermoplastic rubber flat tread on polyolefin core wheel and a bolt on swivel lock capable of supporting 350 lbs./caster.

The listing is for a set of four (4) service caster series #35 casters, two (2) swivel casters with bolt-on swivel locks, and two (2) rigid casters, with 6" diameter by 2" wide thermoplastic rubber donut tread wheels capable of supporting a total weight of 2,000 lbs. (500 lbs./caster).

The listing is for a set of four (4) service caster series #30 swivel casters with 6" diameter by 2" wide thermoplastic rubber flat tread wheels with top lock brakes and bolt-on swivel locks capable of supporting a total weight of 2,000 lbs. (500 lbs. per caster).

Listing is for one (1) Service Caster Series #30 stainless steel swivel caster with a 8" diameter by 2" wide solid polyurethane wheel and a bolt on swivel lock capable of supporting 1,200 lbs./caster.

Listing is for a set of four (4) swivel casters with rubber on aluminum wheels with bolt on swivel locks capable of supporting a total weight of 2,200 lbs. (550 lbs. per caster).

Listing is for a set of four (4) service caster series #30 swivel casters with 5" diameter by 2" wide nylon wheels with bolt on swivel locks capable of supporting a total weight of 3,600 lbs. (900 lbs. per caster).

Listing is for a set of four (4) service caster series #30 swivel casters with 8" diameter by 2" wide rubber on cast iron wheels with bolt on swivel locks capable of supporting a total weight of 2,000 lbs. (500 lbs. per caster).

The listing is for a set of four (4) service caster series #30 swivel casters with 6" diameter by 2" wide polyurethane on aluminum wheels with bolt-on swivel locks capable of supporting a total weight of 4,800 lbs. (1,200 lbs. per caster).

Listing is for a set of four (4) service caster series #30 swivel casters with 4" diameter by 2" wide thermoplastic rubber donut tread wheels with top lock brakes and bolt on swivel locks capable of supporting a total weight of 1,200 lbs. (300 lbs. per caster).

Compatible only with Larson Storm Doors. Sold separately and required to operate the built-in deadbolt on 80 Series, 60 MT Maximum View or Platinum Collection Storm Doors.

The Larson brass door handle was easy to install, very well made, has a durable double deadbolt locking system and is very attractive.. Husker Reviews. Grand Island, NE. Thu Mar 26 2026

Listing is for a set of four (4) service caster series #30 swivel casters with 5" diameter by 2" wide rubber on aluminum wheels with bolt on swivel locks capable of supporting a total weight of 2,000 lbs. (500 lbs. per caster).

Our revolutionary new monitor arms were designed for unprecedented adaptability and instantly improve the comfort, health, and productivity of any workspace. Featuring innovations like Humanscale’s patented weight-compensating spring technology and smart stop functionality, these adjustable monitor arms enable the personalization and flexibility needed for today’s evolving workplaces.

Listing is for four (4) Service Caster Series #92 swivel casters, four (4) swivel casters with side lock brakes and bolt on swivel locks, 12" diameter by 3" wide black phenolic wheel. Supports a total weight of 14000 pounds (lbs) per caster.

Cherry. US. Sat Feb 21 2026

Listing is for four (4) Service Caster Series #92 swivel casters, four (4) swivel casters with side lock brakes and bolt on swivel locks, 10" diameter by 3" wide black phenolic wheel. Supports a total weight of 11600 pounds (lbs) per caster.

Listing is for a set of four (4) service cart series #30 swivel casters with 6" diameter by 2" wide thermoplastic rubber donut tread wheels with bolt on swivel locks capable of supporting a total weight of 2,000 lbs. (500 lbs. per caster).

Listing is for four (4) Service Caster leveling casters with a 2.8” diameter black nylon wheels and M16 metric threaded stems. Supports up to 770lbs per caster.

Listing is for a set of four (4) swivel casters with thermoplastic rubber donut tread wheels with bolt on swivel locks capable of supporting a total weight of 1,200 lbs. (300 lbs. per caster).

Listing is for one (1) Service Caster Series #30 stainless steel swivel caster with a 4" diameter by 2" wide thermoplastic rubber donut tread on polyolefin core wheel and a bolt on swivel lock capable of supporting 300 lbs./caster.

Listing is for a set of four (4) service caster series #30 swivel casters with 5" diameter by 2" wide thermoplastic rubber flat tread wheels with bolt on swivel locks capable of supporting a total weight of 1,400 lbs. (350 lbs. per caster).