The fixed height aluminum gantry cranes are ideal for manufacturing and maintenance facilities. The aluminum construction is easily manageable and can be simply assembled for immediate use. The unit has a fixed height for working in a permanent or semi-permanent environment. The casters allow the user to move the crane from workstation to workstation and smoothly roll over rough surfaces, while not marring. Do not move units while loaded.
Store steel drums in the vertical position with this non-flammable heavy-duty, one-hundred (100) percent Recycled, Vertical Steel Retention Basin. The basin is constructed of steel to resist extreme heat environments. The rugged steel construction provides durability and repairability. Four way fork entry. Basins are stackable when empty to provide more space in a warehouse or storage area.
The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least 48 inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is 29 inches; models FM/PP/PE 3066 and 3072 are 29-13/16 inches, with a 36-5/8 inches long ramping length available. A steel dock edge, or approach ramp is required for proper installation. The Hydraulic Hand Pump system is used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall mount brackets, cylinder, One-hundred Eighty (180) inch hydraulic line and oil. Truck must pull out for leveler to return to stored position.
An eight-wheel dolly can be a major benefit in many conditions. The large oversized wheels give the unit and any material on board, a smooth vessel to move goods in-between areas. Yellow adjustable plate fitted to the rear of the unit. The plate acts as a barrier for items that fit snuggly on the dolly. When the plate is down, it makes room for any oversized products that are too long to fit perfectly square onto the platforms of the dolly. The front of the dolly is an open design that makes it easy to secure any sort of pulling device that may be used. Also included is a strap that can be used to pull the unit, by mechanical or manual means. The eight-wheel unit provides added capacity to the unit by including two extra wheels to the center of the dolly for a more solid foundation.
The portable aluminum load lifter is durable, lightweight, and constructed of corrosion-resistant aluminum. Ideal in shipping and receiving areas to load and unload pallet racking and to move parts. This unit folds up and down for compact storage and easy transportation. The ultra low profile design with the ramp is great for the appliance, office, and furniture stores. Features a foot-actuated brake.
The Manual Operation, Portable Drum Lifter/Rotator/Transporter features pivoting straddle legs for access to drums on pallets. Legs will manually pivot and lock into place with locking pin. The unit is good to use with steel and fiber drums.
The hefty lift is a user-friendly, portable hydraulic lift. The lift provides reliable, powerlifting when moving and positioning loads. It includes a removable platform for operation requiring forks. The non-slip chain is used for accurate positioning while the Lift rolls easily on two rigid and two swivel poly-on-steel casters that include a foot-operated brake. The unit has an all-welded construction with a chrome platform and uprights. Not for use with pallets.
This solid steel Pallet Lifter contains tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load.
Lift items from ground to van floor height then rotate cargo into the area. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.
The Super Low Profile Pallet Truck is ideal for extra low applications. It features a lowered fork height for extra low profile skids, pallets, or machinery. Fingertip lever for raise, lower, and neutral operation. This Pallet Truck has a powder coat finish and a rubber cushioned handle grip.
The adjustable height steel gantry crane is designed for transporting and positioning materials along the length of the beam. The crane's beam height can be adjusted to better conform to the working conditions making it both ergonomically friendly and cost-effective. Unit comes with standard four-position locking swivel casters with roller bearings. Locks the rigging in 1 of 4 positions; you can set the wheels and push the gantry crane forward, back, left or right. Do not move units while loaded. The hoist and trolley can be ordered separately. A painted blue finish protects the unit. Designed for semi-permanent or permanent applications.
A power lift jib crane is designed for material handling applications on docks, in warehouses, or in truck beds. This lift jib crane is the economical answer to your material handling problems. It offers light-duty, intermittent use. Locking manual rotation. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.
This high tubular post is the perfect corner piece for new or existing guard rail systems. The unit stands tall in a variety of settings and includes a smooth finish for simple maneuvering during setup. Base plate has pre-drilled mounting holes for quick installation to the desired surface. Additional posts are available and sold separately. If adding a rail to an existing rail and post section, only a single post is needed.
Lift items from ground to van floor height then rotate cargo into the area. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.
The lite load lift is ideal for lifting and transporting loads from delivery trucks to docks, or use inventory storage systems. This low-profile unit is easy to operate with a hand winch operation and aluminum construction. The unit rolls smoothly on poly-on-poly rear wheels, four swivel front casters, and a hand-operated floor lock. Located on the handle are two rollers to ease loading into delivery trucks.
The steel fork lifter is designed to quickly and easily attach or remove forged steel forks from a carriage. The lifter features different hook points to balance a variety of fork lengths. Two tightening knobs are included to secure the fork to the lifter when being moved.
The Pallet Master/Server enables one person to easily move fully loaded pallets without the use of a fork truck. The unique straddle design works well with pallets and skids with and without an understructure. The unit is ideal for loading and unloading semi-trailers. Hand pendant control on an eight (8) foot coil cord standard. Floor lock standard. All welded steel construction.
The Tilt Master Straddle lifts and positions filled tote boxes or baskets without the need of a fork truck or lift table using the newly designed heavy-duty tilt master. The tilter will function as transporters by moving completed products from work station to work station without waiting for a fork truck. It features a folding ergonomic handle for quick and easy maneuverability. This Lift has a thin profile to allow the user to get as close to the load as possible. The unit has a standard floor lock and rolls easily on the phenolic steering wheels. Lift is designed to be used with virtually any kind of container or pallet and is powered by an AC electric motor that. The unit comes standard with a push-button hand control on a coil cord.
The Lift & Tilt Scissor Lift performs both lifting and tilting operations. There is a restraining chain and lip to keep the load in place during tilting. Safety features include: electric toe guard to protect worker from pinch points during lowering of table, velocity fuses to hold platform position in an event of a hose or fitting failure, four (4) push-button hand pendant control, upper limit switch to stop travel at maximum height reducing motor wear, and maintenance prop. The end tilt is standard with a side tilt available. There is optional accordion skirting available for both the lifting and tilting portions of the table.
The Portable Lift-and-Dump Hydraulic Drum Dumper is what you need to dump drums at variable heights. The HLD works similarly to the HDD but includes a lift cylinder that allows you to dump at various heights. Feature a four (4) push button pendant which allows the operator full independent control of both lift height and the dump angle.
The Edge-O-Dock leveler permanently attaches to the face of a dock. It is recommended for docks to be at least 48 inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is 29 inches; models FM/PP/PE 3066 and 3072 are 29-13/16 inches, with a 36-5/8 inch long ramping length available. A steel dock edge, or approach ramp is required for proper installation. The Electric Hydraulic Edge-O-Dock is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend. The unit comes complete with motor, pump, control box, cylinder, lines and oil. The truck must pull out for leveler to return to stored position.
Elevate semi-trailers to loading docks for maximum serviceability during loading and unloading operations. Manufactured from heavy-duty aluminum tread plate for positive traction. All welded aluminum construction. 30,000 lbs. uniform capacity per pair (¼" thick material). Wheel Risers are designed to raise the trailer for loading and unloading to facilitate compliance with OSHA/ANSI B56.1 part 3 sec 7requirements for maximum grade of ascending or descending loaded fork trucks.
The Tilt Master Straddle lifts and positions filled tote boxes or baskets without the need of a fork truck or lift table using the newly designed heavy-duty tilt master. The tilter will function as a transporter by moving completed products from work station to work station without waiting for a fork truck. It features a folding ergonomic handle for quick and easy maneuverability. This Lift has a thin profile to allow the user to get as close to the load as possible. The unit has a standard floor lock and rolls easily on the phenolic steering wheels. Lift is designed to be used with virtually any kind of container or pallet and is powered by an AC electric motor that. The unit comes standard with push-button hand control on a coil cord.
The Fixed Height Aluminum Gantry Cranes are ideal for the manufacturing and maintenance facilities. The aluminum construction is easily manageable and can be simply assembled for immediate use. The unit has a fixed height for working in a permanent or semi-permanent environment. The phenolic casters allow the user to move the crane from workstation to workstation and smoothly roll over rough surfaces, while not marring. Do not move units while loaded.
The deluxe tilt-back drum truck moves tilt and unloads heavy steel and plastic drums with ease. A footrest helps in loading and supports a loaded drum truck. The unit rolls quietly on wheels. Deluxe chime gripper for quick and easy drum transportation. Gripper slides the entire length of the pipe.
Save time and reduce man-hours where there are no docks with a Truck Scissor Dock Lift. Engineered and designed for maximum safety and efficiency. The diamond plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature safety velocity fuse if line breaks. It comes complete with upper travel limit switch and overload relief valve. The push-button control is on a long coil cord. Pre-wired control box includes magnetic starter and overload fuse. High visibility safety yellow removable handrails with fixed toe boards are standard. Includes beveled toe-guards and electric toe-guards around perimeter of platform. The external motor can be located up to eight (8) feet away from lift.
This near vertical Drum Lifter is designed for the transportation of closed head steel drums with an overhead lifting device. The adjustable attachment point allows drum to be lifted from a horizontal to a near-vertical position. Easily attaches to any drum with both a top and bottom lip. Adjustable top attachment point for use with different height drums.
The All Terrain Pallet Truck is lightweight yet the strong tubular frame design handles evenly distributed loads. The large wheels allow for movement over most surfaces. Unit is great for use at construction sites, gravel pits, and nurseries. It's easy to operate with three position handle, UP, DOWN, and NEUTRAL. Unit rolls on pneumatic front tires and pneumatic steering wheels.
The Manual Tilt Master lifts, tilts, and transports crates, boxes, pallets, with an open bottom. It's designed to give the user an ergonomically correct position to reach loads easily without the need for bending down or excessively reaching over. The Lift rolls smoothly on a polyurethane swivel caster with brake and foot protectors.
Save time and reduce man-hours where there are no docks with a Truck Scissor Dock Lift. Engineered and designed for maximum safety and efficiency. The diamond plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature safety velocity fuse if line breaks. It comes complete with upper travel limit switch and overload relief valve. The push-button control is on a long coil cord. Pre-wired control box includes magnetic starter and overload fuse. High visibility safety yellow removable handrails with fixed toe boards are standard. Includes beveled toe-guards and electric toe-guards around perimeter of platform. The external motor can be located up to eight (8) feet away from lift.
The semi-automatic pallet probe strapping machine eliminates hand strapping and speeds up the process of pallet strapping. This strapping machine is user friendly and automatically feeds the desired polypropylene strap through the pallet, tightens, and seals the strap around the pallet. Operations include unfold pallet probe, push the probe into the pallet, feed polypropylene strap, insert strap tip into strap way, adjusts tension while pulling automatically into heat seal, cuts off, and feeds the strap out all in one cycle. Remove machine and insert into next pallet.
This convenient fork truck work platform quickly and safely raises maintenance personnel where they are needed. Attaches to fork truck by inserting forks into fork pockets and securing platform to fork truck. Fork locks secure platform to forks. Dual handrails on three (3) sides. Expanded metal backing on the fourth side. Includes checker floor plate platform and long strap with hook to attach platform to fork truck. A maximum of two (2) people can be on the work platform at one time. This unit also includes casters.
DC powered portable hydraulic lifts are user friendly providing reliable, powerful lifting when moving and positioning loads. Units roll easily on two rigid and two swivel poly-on-steel casters and include a foot operated brake. Not for use with pallets. All welded steel construction with chrome uprights. Variety of attachments available.
The hefty lift is a user-friendly, portable hydraulic lift. The lift provides reliable, powerlifting when moving and positioning loads. It includes a removable platform for operation requiring forks. The non-slip chain is used for accurate positioning while the Lift rolls easily on two rigid and two swivel poly-on-steel casters that include a foot-operated brake. The unit has an all-welded construction with a chrome platform and uprights. Not for use with pallets.
3600 lbs Wireless Electric Trailer Dolly:Built for heavy-duty towing, this electric dolly offers stability and security with an anti-tip design and deep-tread tires for smooth performance on hard surfaces. Adjustable height and hitch ball for versatile compatibility. Precision control and intelligent protection for ease of use.
Perfect
I am disabled. Works great for trailer and boat.. Anonymous. Sun Mar 08 2026
A stainless steel, adjustable, 3-point drum lifter for lifting, transporting, and stowing 30 and 55 gallon steel or plastic drums. Designed with a 3-point drum contact with stabilizing arms, which reduces damage to the drum and automatically engages the drum rim when lowered. Ideal vertical drum lifting tool which can be used with an overhead crane, hoist, or forklift attachment. Strong and durable - 304 grade full stainless steel construction. Designed for quick and easy one person operation.
Transport plants, flowers, trees, shrubs, rocks, and similar materials or parts with this landscape, nursery & Agriculture cart. The cart is rugged and easy to maneuver with their large pneumatic tires. This cart has mesh sides and bottoms to allow dirt, small rocks, and water to drain through. Tow coupler is standard.
Use this all the time to move stuff around the yard. Jeffrey. San Bruno, CA. Mon Jan 25 2021
This loading platform for fork trucks allows fork trucks to load/unload items into trucks and trailers. Maximum uniform weight capacity is dependent on fork truck capacity. Includes fold-down lip to help with the transition. Side guard toeboards. Four (4) tie-down rings are included for securing equipment (tie downs not included). Checker plate floor for extra traction. Handrails on two (2) sides, back mesh screen, and chain to secure the open end. Safety strap (included) to secure platform to fork truck. Steel construction with blue baked-in powder-coated toughness.
The hydraulic elevating cart minimizes worker bending and lifting through its ergonomic design and portability. The material can be easily loaded onto a cart from a table, lowered to a safe transporting height, and raised to unload at destination. The foot pump includes a soft-lowering down valve. Features a single-speed foot pump.
V-Groove pipe mover makes pipe and tubing measuring for easily moved by 1 person. The V-Groove design keeps loads at the horizontal center of gravity for maximum stability and safety. Large tires will support heavy loads. Includes a handle for added maneuverability.
A scale ramp is an ideal option for the electric digital floor scale. The unit features steel construction with a tread plate that provides a strong foundation for consistent use. This unit is portable and can be moved from workstation to workstation.
The Portable Worksite Lift is ideal for positioning loads where they are needed. It includes a lifting platform and an overhead lifting boom for unique applications. It features a manual hand crank cable winch with hook. Portability is easy with the phenolic swivel casters and a push handle. The unit knocks down in three pieces- base, platform and upright. It's ideal for storage in tight places and for transportation in the back of a vehicle.
The low profile electric lift tables are ideal for the manufacturing and distribution facilities. The unique, steel-constructed, “E” design provides a center support beam to prevent the lifted product from deflecting downward in the center. Numerous protective features include electric toe guards, velocity cylinders, and emergency stop buttons that provide personnel with the utmost safety. An external power pack is equipped with a pressure relief valve that prevents overloading while controlling lowering speed. To raise and lower the unit, simply utilize the ‘up and down’ push-button design on the 24V control box for precise ergonomic positioning of the product.
The Specialized Pallet Truck is ideal for sanitary, pharmaceutical, medical, food, and wet environments. Pallet Truck has type 304 stainless steel frame and forks for long life in the most harsh environments.
This manual cylinder lifter is easy to use and allows for safely lifting cylinders. The pivoting design grabs and squeezes the cylinder when lifted. The lifter has a rubber-coated center and handles holes. Steel construction with a powder-coat yellow finish.
The Battery Transfer Platform is designed to load, unload, and transfer fork truck batteries with the use of a pallet truck. It features a roller deck for easy battery movement. The front locking safety tabs secure battery in platform. The unit has a welded steel construction with a powder coat yellow finish.
