Vestil Dol42486ntfl

Lift items from ground to van floor height then rotate cargo into the area. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.

The Portable Worksite Lift is ideal for positioning loads where they are needed. It includes a lifting platform and an overhead lifting boom for unique applications. It features a manual hand crank cable winch with hook. Portability is easy with the phenolic swivel casters and a push handle. The unit knocks down in three pieces- base, platform and upright. It's ideal for storage in tight places and for transportation in the back of a vehicle.

This tilt table is designed for a variety of applications beyond the home. Effortlessly maneuver the platform with adjustable tilt positions for convenient use. This American-made table features a steel construction, perfect for the demands of any project.

The low profile electric lift tables are ideal for the manufacturing and distribution facilities. The unique, steel-constructed, “E” design provides a center support beam to prevent the lifted product from deflecting downward in the center. Numerous protective features include electric toe guards, velocity cylinders, and emergency stop buttons that provide personnel with the utmost safety. An external power pack is equipped with a pressure relief valve that prevents overloading while controlling lowering speed. To raise and lower the unit, simply utilize the ‘up and down’ push-button design on the 24V control box for precise ergonomic positioning of the product.

The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least 48 inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is 29 inches; models FM/PP/PE 3066 and 3072 are 29-13/16 inches, with a 36-5/8 inches long ramping length available. A steel dock edge, or approach ramp is required for proper installation. The Hydraulic Hand Pump system is used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall mount brackets, cylinder, One-hundred Eighty (180) inch hydraulic line and oil. Truck must pull out for leveler to return to stored position.

The hefty lift is a user-friendly, portable hydraulic lift. The lift provides reliable, powerlifting when moving and positioning loads. It includes a removable platform for operation requiring forks. The non-slip chain is used for accurate positioning while the Lift rolls easily on two rigid and two swivel poly-on-steel casters that include a foot-operated brake. The unit has an all-welded construction with a chrome platform and uprights. Not for use with pallets.

The Manual Operation, Portable Drum Lifter/Rotator/Transporter features pivoting straddle legs for access to drums on pallets. Legs will manually pivot and lock into place with locking pin. The unit is good to use with steel and fiber drums.

This Portable Drum Lifter/Rotator/Transporter is air powered. For use with steel and fiber drums.

The hefty lift is a user-friendly, portable hydraulic lift. The lift provides reliable, powerlifting when moving and positioning loads. It includes a removable platform for operation requiring forks. The non-slip chain is used for accurate positioning while the Lift rolls easily on two rigid and two swivel poly-on-steel casters that include a foot-operated brake. The unit has an all-welded construction with a chrome platform and uprights. Not for use with pallets.

5.94" H x 24" W x 48" D

Elevate semi-trailers to loading docks for maximum serviceability during loading and unloading operations. Manufactured from heavy-duty aluminum tread plate for positive traction. All welded aluminum construction. 30,000 lbs. uniform capacity per pair (¼" thick material). Wheel Risers are designed to raise the trailer for loading and unloading to facilitate compliance with OSHA/ANSI B56.1 part 3 sec 7requirements for maximum grade of ascending or descending loaded fork trucks.

The Lift & Tilt Scissor Lift performs both lifting and tilting operations. There is a restraining chain and lip to keep the load in place during tilting. Safety features include: electric toe guard to protect worker from pinch points during lowering of table, velocity fuses to hold platform position in an event of a hose or fitting failure, four (4) push-button hand pendant control, upper limit switch to stop travel at maximum height reducing motor wear, and maintenance prop. The end tilt is standard with a side tilt available. There is optional accordion skirting available for both the lifting and tilting portions of the table.

The Tilt Master Straddle lifts and positions filled tote boxes or baskets without the need of a fork truck or lift table using the newly designed heavy-duty tilt master. The tilter will function as transporters by moving completed products from work station to work station without waiting for a fork truck. It features a folding ergonomic handle for quick and easy maneuverability. This Lift has a thin profile to allow the user to get as close to the load as possible. The unit has a standard floor lock and rolls easily on the phenolic steering wheels. Lift is designed to be used with virtually any kind of container or pallet and is powered by an AC electric motor that. The unit comes standard with a push-button hand control on a coil cord.

1.25" H x 21.25" W x 13.25" D

This manual cylinder lifter is easy to use and allows for safely lifting cylinders. The pivoting design grabs and squeezes the cylinder when lifted. The lifter has a rubber-coated center and handles holes. Steel construction with a powder-coat yellow finish.

The Tilt Master lifts and positions filled tote boxes or baskets without the need of a fork truck or lift table using the newly designed heavy-duty tilt master. The tilter will function as transporters by moving completed products from work station to work station without waiting for a fork truck. It features a folding ergonomic handle for quick and easy maneuverability. The Lift has a thin profile to allow the user to get as close to the load as possible, a standard floor lock and rolls easily on the phenolic steering wheels. It is designed to be used with open bottom pallets or skids. The unit is powered by an air pneumatic motor.

A power lift jib crane is designed for material handling applications on docks, in warehouses, or in truck beds. This lift jib crane is the economical answer to your material handling problems. It offers light-duty, intermittent use. Locking manual rotation. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.

Multi-Purpose Overhead Drum Lifter/Wrench with it's simple three-arm design for use with closed head steel, plastic, and fiber drums with a top lip. Each removable arm also functions as a wrench for use on drum plugs, faucets, and rim ring bolts. Mechanical operation. Requires assistance from an overhead lifting device.

Constructed of reinforced rubber to provide a sure grip on virtually any surface. Curved surface contours to fit tires. Rubber resists tearing, abrasion, ozone weathering, etc. The functional design is durable in all weather conditions.

The Tilt Master lifts and positions filled tote boxes or baskets without the need of a fork truck or lift table using the newly designed heavy-duty tilt master. The tilter will function as transporters by moving completed products from work station to work station without waiting for a fork truck. It features a folding ergonomic handle for quick and easy maneuverability. The Lift has a thin profile to allow the user to get as close to the load as possible, a standard floor lock and rolls easily on the phenolic steering wheels. It is designed to be used with open bottom pallets or skids. This unit is powered by an electric AC motor. The Lift also comes standard with a push-button hand control on a coil cord.

This Overhead Drum Lifter is designed for lifting drums with an overhead crane or similar lifting device. Integral fork pockets are also included for transportation with forklift. Safety restraint included. Steel saddle is designed for use with steel, plastic & fiber drums with a ratchet strap for securely holding the drum in place. With a non-tilting style, this lifter is made for straight vertical lifting only. Features a durable yellow baked-in powder-coated toughness.

This time tested and proven Automatic Eagle Beak Drum Lifter design allows a fork truck operator to easily secure, move, and release drums without leaving the seat of the fork truck. For use with open (lid installed and secured) and closed head steel, plastic and fiber drums with a top lip strong enough to support the weight of the drum. This unit is a single-drum configuration. Includes safety restraint to secure unit to the fork truck. A ratchet strap is supplied to secure the drum to the unit when traveling over rough terrain.

The Electric Hydraulic Scissor Lift Table is used by all types of manufacturing and warehouse facilities. Safety features include: patented pinch point perimeter toe guard to protect pinch points while lowering of the table, fused push button control, internal safety velocity fuse to maintain platform height in an event of hose or fitting failure, integral maintenance prop, adjustable upper travel limit switch to stop table at maximum height, and a displacement-style hydraulic cylinders for maximum strength. It also features a pressure plated pump, manifold system, displacement style hydraulic cylinder, and a state-of-the-art lifetime lubricated bearings. The standard 56 frame electric motor is a fully enclosed with optional voltages available. Contact factory if platform dimensions are crucial.

Constructed of reinforced rubber to provide a sure grip on virtually any surface. Curved surface contours to fit tires. Rubber resists tearing, abrasion, ozone weathering, etc. The functional design is durable in all weather conditions.

52.18" H x 33.25" W x 48.6" D

The Battery Transfer Platform is designed to load, unload, and transfer fork truck batteries with the use of a pallet truck. It features a roller deck for easy battery movement. The front locking safety tabs secure battery in platform. The unit has a welded steel construction with a powder coat yellow finish.

The Pallet Rack Drum Cradle converts pallet racks into a versatile horizontal drum cradle. The unit works with either box beams and/or step beams. The drum angle is adjustable by using the height-adjustment bolts (sloping drum allows user to get 3% more fluid out).

The Mechanical Dockleveler is constructed of heavy duty checkered plate deck steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Includes two (2) laminated bumpers.

99.75" H x 63" W x 104" D

The Semi-Automatic Stretch Wrap Machine increases productivity in the shipping department or at the end of a production line. This unit is complete with a powered turntable and counter-balanced stretch film mast. The unit is easy to operate, simply depress the foot pedal and manually move the mast up and down. The unit's motor has a soft start/stop and variable speed control. It comes with one film rod with special spacers that can be used with any height roll stretch wrap material between ten (10) and twenty (20) inches.

The Edge-O-Dock leveler permanently attaches to the face of a dock. It is recommended for docks to be at least 48 inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is 29 inches; models FM/PP/PE 3066 and 3072 are 29-13/16 inches, with a 36-5/8 inch long ramping length available. A steel dock edge, or approach ramp is required for proper installation. The Electric Hydraulic Edge-O-Dock is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend. The unit comes complete with motor, pump, control box, cylinder, lines and oil. The truck must pull out for leveler to return to stored position.

Constructed of reinforced rubber to provide a sure grip on virtually any surface. Curved surface contours to fit tires. Rubber resists tearing, abrasion, ozone weathering, etc. The functional design is durable in all weather conditions.

The hydraulic elevating cart minimizes worker bending and lifting through its ergonomic design and portability. The material can be easily loaded onto a cart from a table, lowered to a safe transporting height, and raised to unload at destination. The foot pump includes a soft-lowering down valve. The unit moves easily on four polyurethane casters, two swivels with brakes and two rigid. Features a single-speed foot pump and aluminum construction. Features an internal safety velocity fuse in each cylinder.

The semi-automatic pallet probe strapping machine eliminates hand strapping and speeds up the process of pallet strapping. This strapping machine is user friendly and automatically feeds the desired polypropylene strap through the pallet, tightens, and seals the strap around the pallet. Operations include unfold pallet probe, push the probe into the pallet, feed polypropylene strap, insert strap tip into strap way, adjusts tension while pulling automatically into heat seal, cuts off, and feeds the strap out all in one cycle. Remove machine and insert into next pallet.

The Fixed Height Aluminum Gantry Cranes are ideal for the manufacturing and maintenance facilities. The aluminum construction is easily manageable and can be simply assembled for immediate use. The unit has a fixed height for working in a permanent or semi-permanent environment. The phenolic casters allow the user to move the crane from workstation to workstation and smoothly roll over rough surfaces, while not marring. Do not move units while loaded.

The Tilt Master lifts and positions filled tote boxes or baskets without the need of a fork truck or lift table using the newly designed heavy-duty tilt master. The tilter will function as transporters by moving completed products from work station to work station without waiting for a fork truck. It features a folding ergonomic handle for quick and easy maneuverability. The Lift has a thin profile to allow the user to get as close to the load as possible, a standard floor lock and rolls easily on the phenolic steering wheels. It is designed to be used with open bottom pallets or skids. This unit is powered by an electric AC motor. The Lift also comes standard with a push-button hand control on a coil cord.

This traction-drive cart features built-in traction-drive system for easy transportability. Ideal for applications including mail rooms, hospitals, supermarkets, hotels and warehouses. Features electric drive motor with batteries for power. Internal battery charger is included. Variable throttle speed control for precise maneuvering and positioning is located in the handle. Cart rolls smoothly on non-marking solid foam filled wheels. Speed control is conveniently located in handle. Handle pivots back towards operator and includes horn, automatic brake and emergency stop. Each shelf includes a non-slip tread plate surface. Includes on-board charger and battery level indicator.

This near vertical Drum Lifter is designed for the transportation of closed head steel drums with an overhead lifting device. The adjustable attachment point allows drum to be lifted from a horizontal to a near-vertical position. Easily attaches to any drum with both a top and bottom lip. Adjustable top attachment point for use with different height drums.

Hot Tub Cover Lift:This floor-installed hot tub cover lifter is made of high-quality rust-resistant aluminum alloy, ensuring it can withstand long-term stability and sturdiness in moist bathroom environments. With this, opening, storing, and closing your bathtub cover becomes effortless for one person, freeing you from heavy lifting and space constraints!

I love this because I wasn’t able to get the cover back on without it. Now I can do it easily. Shannon. US. Wed Apr 01 2026

96" H x 36" W x 92" D

The Hydraulic Drum Dumper is what you need to dump heavy drums. Works with plastic, steel, and fiber drums. Dumper has a solid steel chute. This portable unit has casters with floor lock screws. All steel construction. Upper travel limit switch, emergency brass safety velocity fuse in cylinder, and vertical adjustment drum restraints are standard. Dumper is operated with a hand held control on a coil cord standard.

The Stand Alone Powered Carousel easily rotates pallets, skids, and other large objects with this rugged powered carousel. This Carousel includes a round tread plate turntable that is supported with inverted casters for use as bearings. Also included; turntable, base, power unit, and variable-speed control. Turntable is operated with a foot control. Unit has a heavy-duty steel construction.

The lite load lift is ideal for lifting and transporting loads from delivery trucks to docks, or use inventory storage systems. This low-profile unit is easy to operate with a hand winch operation and aluminum construction. The unit rolls smoothly on poly-on-poly rear wheels, four swivel front casters, and a hand-operated floor lock. Located on the handle are two rollers to ease loading into delivery trucks.

30"H x 48"W x 22"D, Stainless Steel

XOVD1 hood canopies are designed and crafted in Italy to accept the XOIL3619SC, XOIL4819SC, XOIL3619KSE or XOIL4819KSE insert lines. Now you can get both the designer look you want and proven XO performance with standard parts engineered to work perfectly together saving both time and money.

also still in the box as do not nd just of yet. Christine. Delray Beach, FL. Sun Mar 08 2026

10" H x 96" W x 138" D

Save time and reduce man-hours where there are no docks with a Truck Scissor Dock Lift. Engineered and designed for maximum safety and efficiency. The diamond plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature safety velocity fuse if line breaks. It comes complete with upper travel limit switch and overload relief valve. The push-button control is on a long coil cord. Pre-wired control box includes magnetic starter and overload fuse. High visibility safety yellow removable handrails with fixed toe boards are standard. Includes beveled toe-guards and electric toe-guards around perimeter of platform. The external motor can be located up to eight (8) feet away from lift.

The Emergency Stop Button Kit is great for the distribution and shipping facilities. The unit allows the operator to shut off the fork truck power from the work platform. The unit works with both gas and electric fork trucks. When installed, simply pull out on the emergency stop button to immediately stop the unit.

Constructed of reinforced rubber to provide a sure grip on virtually any surface. Curved surface contours to fit tires. Rubber resists tearing, abrasion, ozone weathering, etc. The functional design is durable in all weather conditions.