Sliding Closet Door Roller Kit 4 Pack Primeline N 7536

This is a side mounted, top hung wardrobe roller assembly with a tandem 7/8 inch convex nylon wheel for the front sliding wardrobe door. The stamped steel bracket assembly is adjustable and has an 1/4 inch offset. It is fitted onto the wardrobe front door and fits 3/4 inch to 1-3/8 inch thick doors. Used by Acme and Stanley door systems, as well as a variety of other wardrobe door manufacturers. For the back wardrobe door roller assembly use Prime-Line part N 6503.

White

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Wed Jul 16 2025

It worked. Peter. Delta, BC. Fri Nov 15 2019

Prime-Line D 1579-C Sliding Door Repair Track is designed to restore smooth operation to worn or damaged sliding track systems on aluminum doors. This replacement door track cap slips over existing damaged tracks, providing a simple and effective solution to prolong the life of your sliding door. Built to last, the patio track is made of high-quality stainless steel for maximum durability and rust resistance, ensuring long-term performance. Simply prep the existing door tracks, apply a thin bead of silicone glue, and snap the repair track into place using a rubber mallet and block of wood for a secure fit. Each replacement sliding track measures 3/16 inch x 48 inch x 1/4 inch and comes in a convenient 2-pack. For further dimensional information, please see the line drawing before purchasing.

Fit perfectly!. Gordon. Sat Apr 11 2026

15.95" H x 3.4" W x 1.05" D

Prime-Line MP7212 Drawer Hardware Kit is perfect for installing or replacing replacement drawer track hardware on most bottom/side-mounted drawer systems for smooth functionality. This drawer slide hardware kit features a self-closing mechanism that engages during the last 2-1/2 inches of drawer closure, ensuring seamless and secure closing every time. Made of steel tracks with a white powder-coated finish and self-lubricating plastic rollers, this replacement drawer track kit is built to last and can support up to 75 lbs. Comes with all necessary fasteners and detailed instructions for simple installation. Ideal for DIY enthusiasts looking for reliable replacement drawer slide solutions. The 19-3/4 inch tracks fit 16-inch deep drawer cabinets and require specific clearances: 1/2 inch on sides, 1/4 inch at the bottom, and 5/8 inch at the top. For further dimensional information, please see the line drawing.

This is a sliding glass door roller assembly. It has a 1-1/4 inch outside diameter. Features a steel ball bearing roller with an adjustable diecast housing.

This by-pass closet door track is constructed of galvanized steel. It features the same double J-track as those used in Prime-Line’s 2-door kits, and it can also be used with 3-door by-pass systems. The track length is pre-cut to 95 inches to minimize the need for cutting, and it is commonly used with wooden door panels measuring from 3/4 inch thick to 1-3/8 inch thick. This track will safely hold doors that weigh up to 60 lbs. each, and it can be used to mount one panel on each track or one panel on one track and two panels on the second.

This is a combination of a 1-1/8 in. diameter steel concave or grooved ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole, and a combination of 5 different axle choices. Depending on the situation, you can choose to rivet the roller into place or use a roll pin, drive pin, binder post and screw or bolt and nut. Regardless of how you need to install the new roller into your existing roller housing, in most cases, one of the five choices will work.

Closet/Cabinet Door Roller Catch, Matte Black (Single Pack)

This flat edge sliding window roller is constructed from nylon. It comes affixed to a nylon housing. This style roller fits on Guaranteed Products and other similar styled sliding windows.

This 1/2 inch steel roller comes secured in a nylon constructed housing. These rollers install two per track and help keep your windows energy efficient. Used on Superlite series 8000 windows.

This wardrobe door roller is constructed from nylon and comes affixed to a steel bracket. It features an offset adjustable top hung, side mount design. This style roller is used on Acme and similar styled bypass doors that are 3/4 inch to 1-3/8 inch thick.

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Installation easy to install with a few simple tools. This style roller is used on Door Master and similar styled patio doors. Refer to dimensional line drawing to match product specifications.

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. It is a "K" tab patio door roller assembly with a 1-1/4 in. concave or grooved nylon ball bearing roller. The "K" tab style back end is a T shaped tab that is simply slid up into a similar T shaped receptacle in the bottom of the patio door. No screws are required. The housing is 5/8 in. wide and 1-3/16 in. tall with a flare and 3/4 in. dimple width. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Installation easy to install with a few simple tools. Refer to dimensional line drawing to match product specifications. This style roller is used on International and similar styled patio doors.

This by-pass door roller is constructed from nylon. It features a top hung adjustable design that can also act as a corner bracket for steel frame by-passing doors. This roller fits on Acme and other similar styled doors.

This is an F-tab patio door roller assembly with a 1 inch concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is then captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 inch wide and 1-3/16 inch tall with a 7/8 inch dimple width. Used by Lupton and a variety of other sliding patio door manufacturers.

This Closet Door Roller assembly is constructed from nylon. It features an adjustable top mount steel bracket that also acts as a corner bracket for steel frame bypassing doors. This style roller fits on Acme and similar styled doors.

Anonymous. Tue Oct 31 2023

The Prime-Line N 6847 pocket door roller assembly is compatible with a variety of bypass, bi-fold, and pocket closet doors, offering smooth and quiet operation for your sliding door needs. This roller assembly features a top-hung, center-mounted tricycle design with 3/4 inch flat rollers, ensuring seamless and long-lasting door movement. Built with a steel bracket and durable plastic rollers, this pocket door assembly provides reliable strength and quiet functionality for heavy-duty applications. The threaded rod easily installs into the bracket at the top of the door, making this closet door assembly quick and simple to set up with basic tools. Designed for 1-3/8 inch thick doors and tracks with a 1-1/8 inch inside width. For further dimensional information, please see the line drawing and compare it with your original item before purchasing.

Worked well to fix our pocket door. Pam. Belleville, ON. Wed Nov 18 2020

These Rear Drawer Track Sockets are constructed from durable plastic and come white in color. It fits on most side mounted drawer track systems. This style of drawer track support brackets accept most ball bearing drawer slides. They feature 5/16 inch wide x 7/8 inch tall x 2-15/16 inch deep openings and 2-3/4 inch socket depth, which allows for front to back adjustment of the drawer slides. Installation is quick and easy, and all fasteners are included. The maximum load rating is 75 pounds per pair.

White

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Tue Jan 31 2023

This guide is constructed from nylon and includes a 3/4 inch diameter roller. It has a nylon base that measures 3/8 inch diameter. Used by a variety of wardrobe door manufacturers.

This drawer track roller is constructed from nylon and comes affixed to a steel bracket. Roller fits on 3/4 inch high C-style tracks. It comes complete with fasteners for a quick and easy installation.

Replace or repair broken or missing sliding door rollers with this Prime-Line D 1998 Steel Sliding Door Roller Assembly. The stamped steel patio door rollers replacement is adjustable. This door roller assembly is used by a variety of metal framed sliding patio door manufacturers. Made of stamped steel housing with a yellow finish, these sliding door rollers are strong, durable, and built to last. The housing of the sliding door rollers replacement is 11/16 inches wide by 1-11/16 inches deep and 2-3/4 inches long. The concave ball bearing steel roller is 1-1/2 inch. A Phillips head screwdriver is required for installation. Use the screw in the front of the housing to adjust ride height. For further roller assembly sliding door dimensional information, please see the line drawing.

This guide is constructed from nylon. It features a spring-loaded, self-adjusting, top mount design. It fits a 1 inch to 1-3/8 inch thick bi-fold door up to 30 pounds each.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. single cylinder deadlock in a white painted finish.

perfect to upgrade the bifold doors I purchased.. Heather. Hendersonville, NC. Wed Dec 27 2023

Good product. Thanh. Frederick, MD. Fri Feb 06 2026

This is a plain back patio door roller assembly with a 1-11/16 in. concave or grooved nylon ball bearing roller used by Arcadia and a variety of other patio door manufacturers. The stamped steel housing has a unique design that is 3/4 in. wide, 1-5/16 in. tall and 2-11/16 in. long with an adjustment screw located on the back end. See Prime-Line part D 1731 for the tall version.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

It does the job. It is kind of heavy, but it is effective.. Tiffany. Cocoa, FL. Wed May 28 2025

This guide wheel is constructed from nylon and has a diameter of 7/8 inch It comes affixed to a spring-loaded steel constructed base with a top mount self-adjusting design. It fits Acme, Cox, and other similar styled doors that are 1 inch to 1-3/8 inch thick.

This is a C-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The housing is 9/16 in. wide and 1-3/8 in. tall with a 3/4 in. dimple width. Used on Window Master patio doors. It replaces the original K-tab style that is no longer available.

This is a black plastic housing sliding window roller assembly. It features a flat-edged plastic wheel with a 3/4 in. outside diameter, with stainless steel ball bearings.

This is a top guide that fits on top of the steel framed mirrored door panels. The guides have a steel housing with a floating nylon guide on top. It fastens onto the top of the steel framed mirrored doors with your screws.

simple adjustment necessary to make it work for my application. Neal. Mississauga, ON. Mon Apr 13 2020

This door guide is constructed from nylon. It features an adjustable bottom mount design. It fits on doors that are 3/4 in. to 1-3/8 in. thick.

This is an adjustable stamped steel sliding closet door floor guide, with nylon tips. The guides are made of white nylon and can be adjusted to accommodate doors from 3/4 inch to 1-1/4 inch wide. Used by a variety of closet door manufacturers.

Just what I needed to stabilize my sliding closet doors. I bought the doors from Wayfair, and they’re great, but they only included two of these floor guides for a 10 foot wide door. These really enhanced the function of the beautiful doors.. Ballroom Dancer. New England. Sat Jul 26 2025

This is a white plastic housing with a concave steel roller. It features a two different height adjustment. Used by Alenco window.

1"

The Prime-Line N 6848 pocket door roller assembly is compatible with a variety of bypass, bi-fold, and pocket closet doors, offering smooth and quiet operation for your sliding door needs. This roller assembly features a top-hung, center-mounted tricycle design with 1 inch flat rollers, ensuring seamless and long-lasting door movement. Built with a steel bracket and durable plastic rollers, this pocket door assembly provides reliable strength and quiet functionality for heavy-duty applications. The threaded rod easily installs into the bracket at the top of the door, making this closet door assembly quick and simple to set up with basic tools. Designed for 1-3/8 inch thick doors and tracks with a 1-1/8 inch inside width. For further dimensional information, please see the line drawing and compare it with your original item before purchasing.

This was the perfect replacement match I needed for an old closet door roller.. Will. Houston, TX. Mon Jul 04 2016

Gray, 30.13" H x 3.75" W x 1" D

This Prime-Line Adjustable Sliding Door Lock features a telescopic design that allows it to adjust to fit nearly all standard patio door openings. The lock bar is adjustable to accommodate openings from 28 inch to 48 inch Secure your door in an open position, so you can safely allow fresh air into your home. When not in use, simply swing the metal security bar up and out of the way. Unlike typical patio door patio door lock bar, this door lock stick does not require you to cut the unit down to size with a saw. You simply press in the tension release clip to extend the length or reduce the length. Constructed of aluminum with an aluminum finish, the patio safety bar prevents doors from being forced open. Please refer to the line art drawing for dimensions and compare to your needs before purchasing.

Perfect for securing my sliding glass door. Glad I found it.. Carolyn. Louisville, KY. Fri Feb 20 2026

Upgrade your sliding doors with this back mount tandem roller assembly, designed for Andersen wood patio doors and compatible with many other wood door brands. Two 1-1/4 inch concave steel ball bearing rollers ensure smooth, quiet operation, while the stamped steel housing with side adjustment makes precise alignment simple. Top insert points and side locking tabs secure the assembly for long-lasting performance. Perfect for DIY homeowners or contractors, this durable roller assembly restores effortless sliding and improves door longevity. Installation is easy with a standard Phillips head screwdriver.

Anonymous. US. Fri Apr 11 2025

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a stainless steel housing and spring-loaded arm roller assembly, with a 1-1/4 Inch stainless steel ball bearing roller attached. Used by Bay-Mills as well as a variety of other patio door manufacturers. The spring-loaded roller arm is adjusted by the adjustment sleeve and screw on top. Order yours today and have your door slide like new.

This ADA compliant slide latch is constructed of stamped stainless steel and comes in a satin finish. It is a surface-mounted latch that is designed for use on 1 in. thick swing-in partition doors, and it comes complete with an "occupied" indicator and a matching stainless steel keeper. The exterior indicator has a dial-type internal mechanism that announces a locked door (or an occupied stall) with red color when the lock is engaged. When the slide lock is in the unlocked position, the dial indicator reveals a green color, or unoccupied state, announcing its availability for use. For access to the locked stall, the exterior indicator also comes equipped with a stainless steel pull and a slotted barrel nut which can disengage the lock from the exterior in the event of an emergency. This latch mounts over a durable, black plastic base with its mounting holes spaced apart at 1-3/8 inches, and it features a 1-3/16 in. bolt throw. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

This wardrobe door roller is constructed from nylon and comes affixed to a steel bracket. It features an adjustable, top hung, side mounting design. This roller fits Harvey and similar styled by-pass doors that are 3/4 to 1-3/8 inch thick.

This is a C-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. As the C-tab is positioned around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 9/16 in. wide and 1-3/8 in. tall with a 3/4 in. dimple width. Used on Window Master patio doors. It replaces the original K-tab style that is no longer available.