Reg Fit Str Leg Jean Den 44x34 Dkw 622

Our chair leg floor protectors silicone cup and felt padare integrally formed, prevents the felt pad from falling off during use. Easy to put on the legs and they stayed in place not fall off.

The chair leg protectors fit the chairs perfectly and allow movement with no damage to the wood floor.. Babe. Phoenix. Fri May 01 2026

Excellent quality nice looking!. Kim. West Vancouver, BC. Sat Dec 07 2024

Practical table leg for dining or work tables. Adjustable and easy to install.

Square legs with metal sleeves give you the best of contemporary, urban, and industrial design. Clean and simple, with a mix of materials. Custom wood species and metal finishes available. Custom components and custom cut products are NOT returnable.

Square legs with metal sleeves give you the best of contemporary, urban, and industrial design. Clean and simple, with a mix of materials. Custom species & metal finishes available. Custom components and custom cut products are NOT returnable.

Low profile PVC End Cap. End Caps are used to transition from flooring to carpet, masonry, sliding doors, and other exterior door jambs. Comes with Slimtrack and Versatrack-Shim for floors up to 3/8" (9.5mm)

This trim is Very hard to install. Instructions would have been helpful.. Bernhard. Massachusetts. Tue Jun 16 2026

The lavatory sink legs provide support to your wall-mounted console sink and are manufactured for use with vitreous china, steel, or cast-iron lavatories. Constructed of metal, these hexagonal-shaped legs are perfect for new installations, replacement or to provide added support to a loose sink. The legs can also be cut to shorter lengths if desired. All parts are designed with quality engineering and construction to be durable and reliable to meet the highest quality standards.

The lavatory legs are high-quality, but did not adjust to the height that was mentioned in their description. The description said that the legs would adjust to 32 3/4", but they would only properly adjust to the sink bottom being only a maximum of 30 1/2" from the floor. The sink that I used them on, was 31" from the floor, so the escutcheon needed to go farther than the chromed legs until it was only covering the top adapter. It still holds the sink up, but the escutcheon is now only attached to the top adapter, rather than the leg, and so it's not as firmly attached.. Andy. Mckinleyville, CA. Thu Apr 16 2026

Symple Stuff Hairpin Table Legs, the perfect solution to elevate your furniture with a touch of mid-century style. These table legs are designed to provide both stability and visual appeal, making them ideal for coffee tables, side tables, and nightstands. Crafted with high-quality materials, these hairpin legs are built to last.

Contemporary square leg for high tables or counters. One of the easiest ways to customize your table or counter. Adjustable and easy to install.

T-Plate Purpose: Designed for attaching sofa legs to new or damaged sofas, couches, love seats, and ottomans. These plates have 5/16" threaded centers for easily attaching hanger-bolt style legs. They attach to your sofa with four screws placed directly into the wood frame of the couch. The Solution for Damaged Hangar Bolt Sofa Leg Attachment Points: If your sofa is so damaged that a T-Nut will not attach to your sofa, we recommend the T-Plate Sofa Leg Attachment Plate. This plate installs on your sofa over the old T-Nut hole. These plates have 5/16" threaded centers for easily attaching hanger-bolt style legs. They attach to your sofa with four screws placed directly into the wood frame of the couch. Your standard 5/16" hanger bolt sofa leg will then screw into the threaded 5/16" center of the T-Plate. Can Be Used in Place of T-Nuts: If your existing T-Nuts have worked loose and your legs won't stay in place, this is a great option for repairing the sofa and keeping your legs in place.

Would recommend for all seating. Brenda. Odessa, FL. Fri May 15 2026

Spade Dining Table Leg - Set of 4

amazing design and strength-highly recco. Trish. Incline Village, NV. Sun Jun 14 2026

Bed rails for the elderly, safety bed handrail: Your reliable support: Bed rails for the elderly, constructed with high-strength carbon steel, 2 supporting legs, and a fastening strap, offer robust stability. Effortlessly access your bed with the 180° foldable design and 4-level adjustable handle. Add much convenience with the storage bag and the dual handles.

This is great even for seniors. I use it for my dad. It gives me peace of mind knowing he can’t get up and wander around the house at night. I like the folding feature.. Anonymous. Wed Sep 02 2026

The VEVOR set of 2 industrial-style black steel table legs delivers a perfect blend of durability, strength, and modern design for your DIY furniture projects. Constructed from cold-rolled steel with a sandblasted and varnish-painted finish, these heavy-duty desk legs are rust-resistant, crack-proof, and built to last. Measuring 28" high and 23" wide, they feature a 3.15" x 1.57" box-section square frame for maximum stability and clean appearance. With an impressive load capacity of up to 2204 lbs., these furniture legs are strong enough to support heavy dining tables, cabinets, or benches without compromising strength. The fully welded structure eliminates wobble, while the pre-drilled mounting plates ensure quick and secure installation. These versatile legs complement wood, composite, or custom tops and can be painted to match any style. Whether used for coffee tables, TV stands, end tables, or workbenches, the VEVOR metal table legs add both reliability and industrial elegance to any space.

Paired this with the solid wood acacia butcher block 60in x 30in x 1in for a computer desk and came out perfect. Eric. Camarillo, CA. Wed Jun 17 2026

Modern elegant furniture leg with a unique mounting plate that gives you five options to position the leg. Heavy-duty and adjustable. Easy to install.

was perfect for what I needed them for. Angela. Hermiston, OR. Sun Sep 18 2022

Each furniture Bun Foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. American Pro Decor's Bun feet furniture legs come with a 1/4 in. Thick slide on the bottom making it easier to move furniture around. Most importantly, they have a pre-installed 5/16 in. - 18 in. thread hanger bolt for fast and easy installation on furniture. Bun feet add a decorative accent to any furniture. They make an excellent choice to restoring and providing a different appearance to any furniture. To coordinate your desired finish, our Bun feet are Unfinished, smoothly sanded and ready for painting or staining.

This set of four galvanized steel legs is engineered to offer sturdy, reliable support for workstations, tables, and equipment stands in high-traffic commercial kitchens or industrial environments. Each leg stands at 42 in., which includes a 1 in. adjustable bullet foot, ensuring stability on uneven surfaces and allowing for easy leveling adjustments. Made from durable galvanized steel, these legs are built to resist rust and corrosion, providing long-lasting performance even in harsh, moisture-prone environments. Designed for heavy use, these legs deliver the strength and stability needed to keep your equipment secure and your workspace functional. Easy to install, these legs integrate seamlessly with compatible surfaces, making them ideal for new setups or as replacements for existing legs. The adjustable bullet feet help ensure that your tables remain steady, even on uneven floors, giving you the confidence that your workspace is safe and level.

Victoria. Sun Jun 28 2026

Contemporary round furniture leg, ideal for cabinets and closets. Easy to install, with a possible height adjustment.

Square legs with metal sleeves give you the best of contemporary, urban, and industrial design. Clean and simple, with a mix of materials. Custom wood species and metal finishes available. Custom components and custom cut products are NOT returnable.

Your home reflects your personality. Use high-end unique table legs to design and make household items you'll love for years.

I only give four stars for these legs, because a little engineering would make it really exceptional! If the holes on it wouldn’t be circular but elliptical, ( I attached a pic. of an other sofa leg, what I replaced with this one, with an elliptical hole on it) it would fit on any sofa without any trouble.. Andrea. Northridge, CA. Wed Nov 16 2022

Good legs. As advertised. Quick shipping. George. Olathe, KS. Wed Oct 20 2021

8''H, Set of 4. Electroplated Satin Nickel finished. Heavy duty 2 Rods U shape solid steel,Mounting Screws are not included. Perfect for DIY your coffee tables, night stands, end tables, Chairs Cabinet Legs and any other your projects,etc. The welding area is stamp a hole through the attachment plate to receive the steel rod instead of welding straight to the attachment plate.

Amazing quality. Very sturdy. Easy to install.. Maria Clara. Houston, TX. Sun Dec 14 2025

Each furniture Bun Foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. American Pro Decor's Bun feet furniture legs come with a 1/4 in. Thick slide on the bottom making it easier to move furniture around. Most importantly, they have a pre-installed 5/16 in. - 18 in. thread hanger bolt for fast and easy installation on furniture. Bun feet add a decorative accent to any furniture. They make an excellent choice to restoring and providing a different appearance to any furniture. To coordinate your desired finish, our Bun feet are Unfinished, smoothly sanded and ready for painting or staining.

Approximate Dimensions . Height: 3-3/4". Top Width: 2-1/4" x 5". Bottom Width: 2-1/4" x 3-3/4". Material Type: Wood. Our sofa legs are not just for the sofa. Your entire sofa, chair, ottoman, and other furniture pieces rest on the leg. If the leg is loose or defective, the result can be uncomfortable. Defective legs can lead to structural damage to the furniture because of uneven stress loads being placed on the frame. The well-being of your furniture needs to keep the legs in good repair. Even if your legs are still in good condition, you may wish to add new legs for function or appearance's sake. Purchasing taller legs than those presently installed will raise the height of the furniture from the floor, and of course, shorter legs will lower the height. An easy cost, effective way to alter the style of your furniture is with the installation of new legs. There are many styles, colors, and finishes from which to choose. Each leg is installed with a Hanger Bolt and is easy to remove and attach. The leg is simply turned to the left to remove and to the right to install. Choosing the correct Hanger Bolt size is vital to ensure a correct fit. There are three available sizes of Hanger Bolts. Please carefully check the hanger bolt size on your present leg to ensure your new legs are compatible. The 5/16" bolt is the most common size, especially in American-made furniture. M8 (8mm) bolts are typically seen on Swedish furniture, as well as some other imported items. M10 (10mm) is seen on other European imports, especially those from Italy. You can reference the images for the difference between the 5/16" and M10 bolts. 5/16" and M8 look almost the same, with the difference being the type of thread. Be sure to check the fit with a bolt or nut, and not just with a tape measure or ruler. The three sizes of hanger bolts are NOT cross-compatible, so please check carefully before ordering. If you are uncertain which size Hanger Bolt you need, please call for assistance. We also offer a Hanger Bolt Fit Test Kit that allows you to test an actual 5/16", Metric M8 hanger bolt, and a Metric M10 hanger bolt to determine which fits your needs. Please note that wood grows in a forest in the form of trees; it is not manufactured in a factory like plastic. As a result, every leg is unique with naturally occurring variations in color, texture, and grain pattern. These distinguishing features contribute highly to why wood is sought after as a material for sofa legs and fine furniture. Because wood is a natural material, each may differ slightly from the photographic representation shown on the website.

High quality Steel Dining Table Legs,Black Powder Coated 18'' Height ,2 3/8'' Width,Straight Steel Legs,well welding finished Perfect for DIY your dining table,office table,Kitchen table,etc. Mounting Screws are not included,No instruction is included

These wouldve been perfect, had I not missed the height for my table I have being made. I needed taller, but they were very nice otherwise.. Anonymous. Fri Apr 17 2026

Approximate Dimensions . Height: 3-3/4". Top Width: 2-1/4" x 5". Bottom Width: 2-1/4" x 3-3/4". Material Type: Wood. Our sofa legs are not just for the sofa. Your entire sofa, chair, ottoman, and other furniture pieces rest on the leg. If the leg is loose or defective, the result can be uncomfortable. Defective legs can lead to structural damage to the furniture because of uneven stress loads being placed on the frame. The well-being of your furniture needs to keep the legs in good repair. Even if your legs are still in good condition, you may wish to add new legs for function or appearance's sake. Purchasing taller legs than those presently installed will raise the height of the furniture from the floor, and of course, shorter legs will lower the height. An easy cost, effective way to alter the style of your furniture is with the installation of new legs. There are many styles, colors, and finishes from which to choose. Each leg is installed with a Hanger Bolt and is easy to remove and attach. The leg is simply turned to the left to remove and to the right to install. Choosing the correct Hanger Bolt size is vital to ensure a correct fit. There are three available sizes of Hanger Bolts. Please carefully check the hanger bolt size on your present leg to ensure your new legs are compatible. The 5/16" bolt is the most common size, especially in American-made furniture. M8 (8mm) bolts are typically seen on Swedish furniture, as well as some other imported items. M10 (10mm) is seen on other European imports, especially those from Italy. You can reference the images for the difference between the 5/16" and M10 bolts. 5/16" and M8 look almost the same, with the difference being the type of thread. Be sure to check the fit with a bolt or nut, and not just with a tape measure or ruler. The three sizes of hanger bolts are NOT cross-compatible, so please check carefully before ordering. If you are uncertain which size Hanger Bolt you need, please call for assistance. We also offer a Hanger Bolt Fit Test Kit that allows you to test an actual 5/16", Metric M8 hanger bolt, and a Metric M10 hanger bolt to determine which fits your needs. Please note that wood grows in a forest in the form of trees; it is not manufactured in a factory like plastic. As a result, every leg is unique with naturally occurring variations in color, texture, and grain pattern. These distinguishing features contribute highly to why wood is sought after as a material for sofa legs and fine furniture. Because wood is a natural material, each may differ slightly from the photographic representation shown on the website.

Installed easily and looks great for tile to laminate flooring.. Kevin. Thu Nov 16 2023

I replaced the feet on my older bed frame with these seamlessly.. Brent. Opelika, AL. Mon Aug 18 2025

Inst antly elevate your interior design projects with this sleek and modern table leg. This versatile leg seamlessly integrates into various furniture styles, adding a touch of sophistication to your creations.

Very Sturdy table legs used to rise my chair so that it aligns with my computer as I do zoom class. Love the adjustable legs.. Cynthia. US. Thu Mar 05 2026

Designed to seal smaller gaps, this threshold provides year-round protection against weather and insect infiltration.

The color is as described, shiny silver, wish they had more of a matte color. Be sure to pre-measure your space! We had to trim this length wise (door length) and the fit for the width that covers both sides of the floors was too narrow so we had to adjust the floors. This wasn't the fault or the threshold, but an oversight with our pre-measuring. Be sure to check if you're trying to cover any gaps to make sure this would cover it.. Kellen. OR. Tue Mar 03 2026

Miriam Rafaela. Oshawa, ON. Mon Apr 13 2026

Each Mission Kitchen Island Leg is meticulously crafted from high quality, furniture grade North American Hardwoods by experience artisans. Each Kitchen Island Leg has passed a quality control process to ensure that you receive a product with superior artisanship. American Pro Decors Plain Kitchen Island Legs are sanded, unfinished, and ready for staining or painting to match your project. There are several options where Island Leg posts can be used. They make excellent Stand-alone posts to support a Countertop. They can also be used as small decorative column post. They can be applied to a Cabinet face, Kitchen Peninsula or Center Kitchen Island. The use of Kitchen Island Legs can add beauty and sophistication to your projects. Our Kitchen Island Legs will add warmth and style to any interior design.

solid legs love them. Janet. Rockyview, AB. Mon Sep 15 2025

Deer Blind Brackets:Our 0.12-inch thick steel brackets support up to 2204 lbs. Their rust-resistance black coating and 8° tilt offer stability. The set includes 12 pre-drilled holes and full hardware set for quick and easy installation. Ideal for deer blinds, shooting platforms, playsets, and treehouses.

Anonymous. Fri May 08 2026

Lavita fireclay leg set compatible with 1168 sink top only. Classically styled fireclay leg set made from 100% , super durable, and non-porous fireclay (sink sold separately).

Square legs with metal sleeves give you the best of contemporary, urban, and industrial design. Clean and simple, with a mix of materials. Custom wood species and metal finishes available. Custom components and custom cut products are NOT returnable.

Each top features a decorative nature wood, stone pattern, or solid color veneer on the surface, which exudes nature and beauty to supply your unique environment.

Everything from the size and the feel did not disappoint bought this to upgrade my desk for my setup and if feels amazing 1010 pricing aswell best price I could find anywhere for great quality Mine did arrive alittle damaged however but it looks to have been due to shipping sadly. Orly. Thu Aug 20 2026

RV detachable table leg can freely adjust the angle and height according to your needs. It can rotate 360 degrees, and the height can be adjusted up and down.Installing a rotating table on a motorhome or yacht can solve the trouble of not having a turntable in the car, which makes your journey in a caravan swivel motorhome more convenient.

Leg Extension and Curl Machine:Designed for 550lbs ultra-strong load capacity, with interchangeable 1in and 2in weight posts, just increasing the weight as you needs, heavy duty adjustable leg extension and curl machine helps you lose excess weight and build a charming figure.

Love it. Gives me the ability to build my quads without straining my back.. Ellen. US. Sun May 31 2026

Each furniture bun foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. American Pro Decor's bun feet furniture legs come with a 1/4 in. thick slide on the bottom making it easier to move furniture around. Most importantly, they have a pre-installed 5/16 in. - 18 in. thread hanger bolt for fast and easy installation on furniture. Bun feet add a decorative accent to any furniture. They make an excellent choice to restoring and providing a different appearance to any furniture. To coordinate your desired finish, our bun feet are unfinished, smoothly sanded and ready for painting or staining.

A solid product and very easy to install. These furniture legs made a world of difference to the height and comfort of our love seat.. Larisa. Grand Bend, ON. Sun Jan 04 2026

This 4-pack heavy-duty furniture leveling feet feature 3/8”-16 threaded steel inserts with adjustable height ranging from 3/4” to 1 3/4”. Each leveler holds 330 lbs, with the whole set supporting 1320 lbs. Equipped with a large nylon base and extra felt pad to shield hardwood, tile and carpet floors against scratches. The package contains T-nuts and mounting screws, suitable for tables, cabinets and sofas in homes, offices and commercial venues.

Approximate Dimensions . Height: 3-3/4". Top Width: 2-1/4" x 5". Bottom Width: 2-1/4" x 3-3/4". Material Type: Wood. Our sofa legs are not just for the sofa. Your entire sofa, chair, ottoman, and other furniture pieces rest on the leg. If the leg is loose or defective, the result can be uncomfortable. Defective legs can lead to structural damage to the furniture because of uneven stress loads being placed on the frame. The well-being of your furniture needs to keep the legs in good repair. Even if your legs are still in good condition, you may wish to add new legs for function or appearance's sake. Purchasing taller legs than those presently installed will raise the height of the furniture from the floor, and of course, shorter legs will lower the height. An easy cost, effective way to alter the style of your furniture is with the installation of new legs. There are many styles, colors, and finishes from which to choose. Each leg is installed with a Hanger Bolt and is easy to remove and attach. The leg is simply turned to the left to remove and to the right to install. Choosing the correct Hanger Bolt size is vital to ensure a correct fit. There are three available sizes of Hanger Bolts. Please carefully check the hanger bolt size on your present leg to ensure your new legs are compatible. The 5/16" bolt is the most common size, especially in American-made furniture. M8 (8mm) bolts are typically seen on Swedish furniture, as well as some other imported items. M10 (10mm) is seen on other European imports, especially those from Italy. You can reference the images for the difference between the 5/16" and M10 bolts. 5/16" and M8 look almost the same, with the difference being the type of thread. Be sure to check the fit with a bolt or nut, and not just with a tape measure or ruler. The three sizes of hanger bolts are NOT cross-compatible, so please check carefully before ordering. If you are uncertain which size Hanger Bolt you need, please call for assistance. We also offer a Hanger Bolt Fit Test Kit that allows you to test an actual 5/16", Metric M8 hanger bolt, and a Metric M10 hanger bolt to determine which fits your needs. Please note that wood grows in a forest in the form of trees; it is not manufactured in a factory like plastic. As a result, every leg is unique with naturally occurring variations in color, texture, and grain pattern. These distinguishing features contribute highly to why wood is sought after as a material for sofa legs and fine furniture. Because wood is a natural material, each may differ slightly from the photographic representation shown on the website.

Discover the ultimate protection for your furniture! Our cleverly designed felt-bottom furniture socks feature a double-layer of felt with rubberized grips inside. Each package contains 8 versatile socks, allowing you to mix and match colors and sizes easily for the different chair legs throughout your home. Have you ever been concerned about scratching your flooring? With these patented furniture socks, you can rest easy knowing that they are built to safeguard your hardwood, bamboo, laminate, and tile floors from damage. Their heavy-duty thickness provides an extra layer of protection against scratches and mars. Do you want a stylish touch for your furniture? These socks are not only functional but also fashionable; you can fold down the top for a trendy cuff or pull them up high for a sleek look. Featuring strong elastic from top to bottom and rubber grippers that ensure a secure fit, these socks stay in place while their thick felt bottoms shield your floors effectively. Each package includes 8 socks felt-bottom furniture socks, perfect for outfitting 2 chairs, barstools, or tables. Designed in a universal size, they fit chair legs circumference with ranging from 2.3 inches to 6.7 inches & chair legs diameter from 0.7 inches to 2.2 inches. Are you ready to protect your beautiful floors with these innovative furniture socks?

Size: 28 inx28 in. Material: The attachments and assembly screws are inside. Square tube (8 cm x 8 cm square tube). Finish power-coating, a high-quality, durable finish, allowing for maximized production, improved efficiencies, and simplified environmental compliance.

Beautiful and solid table legs. These will go beautifully with my future live edge table!. Katie. WI. Thu May 21 2026

Didn’t even know this existed. So happy I only needed to purchase a new shade instead of a whole new lamp.. Kristine. Reading, PA. Mon Feb 05 2024

X-type heavy duty table legs are designed specifically for DIYers, makers, and professionals. These metal legs are heavy duty proofed and will add both stability and mid-century modern style to any furniture projects. These legs are black powder coat finishes. You are able to build any number of designs including cabinets, coffee tables, benches, bedside tables, desk/dining tables, counter tables, nightstands, end tables, kitchen tables, and bar! These table legs are designed for do-it-yourself installation. You are able to attach the legs to any surface to create the design of your choosing!

These are exactly what I needed and are gong work perfectly - Also saved a lot of money buying these. Very happy with my purchase. Philip. Jackson Heights, NY. Thu Jun 04 2026

The Georgianna Table Legs is designed specifically for makers, and professionals. These hairpin metal legs are heavy-duty proofed and will add both stability and mid-century modern style to any furniture project.

Perfect for my walnut slab table DIY!. Lindsey. Indianapolis, IN. Fri Aug 07 2026

X-Type table legs are designed specifically for DIYers, makers, and professionals. These metal legs are heavy-duty proofed and will add both stability and mid-century modern style to any furniture project. These legs are black powder coat finishes. You are able to build any number of designs including cabinets, coffee tables, benches, bedside tables, desk/dining tables, counter tables, nightstands, end tables, kitchen tables, and bars! These table legs are designed for do-it-yourself installation. You are able to attach the legs to any surface to create the design of your choosing!

I love the design and worked great for our table we built. All parts came as described and was easy to assemble. The parts are all good quality.. Steve. Plantsville, CT. Wed Dec 03 2025

Each furniture Bun Foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. American Pro Decor's Bun feet furniture legs come with a 1/4 in. Thick slide on the bottom making it easier to move furniture around. Most importantly, they have a pre-installed 5/16 in. - 18 in. thread hanger bolt for fast and easy installation on furniture. Bun feet add a decorative accent to any furniture. They make an excellent choice to restoring and providing a different appearance to any furniture. To coordinate your desired finish, our Bun feet are Unfinished, smoothly sanded and ready for painting or staining.

Raised my very modern desk to 30” we painted them black to match. Looks great. Bonnie. Reno, NV. Sat Mar 28 2026