Primeline Single 114 In Steel Ball Bearing Roller Ftab Style Adjustable D 1519

This is a F-tab patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 3/4 in. wide and 1-1/2 in. tall with a rear adjusting screw. Used by Holleyview, Fullview and a variety of other patio door manufacturers.

This is a C-tab patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. The housing is 23/32 in. wide and 1-3/16 in. tall, and 2-5/16 in. long. As the C-shaped tab fits around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. Used by Merzorr and a variety of other patio door manufacturers.

This is a E-tab patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 23/32 in. wide and 1-3/16 in. tall with a dimple width of 7/8 in.. Used by Solar Industries and a variety of other patio door manufacturers.

This 1-1/2 inch E-tab tandem roller assembly is designed for Fleetwood and a variety of other sliding patio doors. It features two concave Steel ball bearing rollers in an adjustable stamped steel housing for smooth, quiet operation. The E-tab mounting allows the corner screw to pass through, capturing the roller assembly and positioning it securely in the door’s bottom rail. The housing measures 11/16 inch wide, 1-1/8 inch tall, with a 13/16 inch flare. Rear adjustment allows precise alignment during installation, making it ideal for DIY homeowners and contractors. A Phillips head screwdriver is required.

This is a plain back patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 5/8 in. wide, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end. It is used by Capitol and a variety of other manufacturers of patio doors.

This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. The housing that is 5/8 in. wide and 1 in. tall with two mounting tabs/hooks on the top. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end that holds it in place once the tabs/hooks are snapped into place in the door's bottom rail. It has a 3/4 in. flare It is used by Smith Carry and variety of other manufacturers of patio doors.

This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 3/4 in. wide and 1-3/16 in. tall with a dimple width of 7/8 in.. Used by Northrup series 600 doors and a variety of other patio door manufacturers.

This is an S-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the S-tab it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 17/32 in. wide and 1-5/32 in. tall. It is a common shape that a variety of patio door designers have incorporated into their patio door.

This is a F-tab tandem roller assembly with two steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable stamped steel housing is 11/16 in. wide with a flare width of 7/8 in., 1-1/16 in. tall and 3 in. long. It has a low carriage allowing for easy door removal. Typically used by Merzon and a variety of other patio door manufacturers. Either item features 1-1/8 inch diameter rollers.

This is a K-tab patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 3/4 in. wide, 1-3/16 in. tall and 2-5/16 in. long. Used by T. M. Cobb and a variety of others patio door manufacturers.

This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 5/8 in. wide with a 11/16 in. flare, 1-1/4 in. tall with a rear adjusting screw. Replaces the old style Couples door roller and is used by a variety of patio door manufacturers.

Restore smooth, effortless operation to your sliding patio door with this Tandem Stainless Steel Roller Assembly. Designed with a unique bottom-mount housing, this roller assembly is commonly used on Andersen sliding patio doors and many other wood patio door brands. It is an ideal choice for homeowners and DIY installers seeking a durable replacement solution. The assembly includes two 1-1/2 inch concave stainless steel ball bearing rollers housed in a corrosion-resistant stainless steel frame. This construction provides strength, durability, and long-lasting performance, especially in coastal or high-humidity environments where rust and corrosion are common issues. The stainless steel housing measures 11/16 inch wide, 1-3/16 inches tall, and 4-5/8 inches long, with a mounting tab at each end for secure installation. It is designed to fit into a mortised pocket in the bottom rail of the door. For added convenience, the roller assembly features a side adjustment mechanism, allowing you to fine-tune the door height and alignment with a standard screwdriver. Whether you are repairing an Andersen sliding door or replacing worn rollers on another wood patio door, this stainless steel roller assembly provides a reliable and long-lasting solution to keep your door gliding smoothly. Please refer to the line art drawing for exact dimensions to ensure compatibility before purchasing, as this is not a universal part.

This is a U-back patio door roller assembly with a 1-1/2 in. concave (center grooved) steel ball-bearing roller. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw is tightened. The housing is 25/32 in. wide, 1-7/16 in. tall with a rear adjusting screw. Used by Crown manufacturing, Pennco, and a variety of other patio door manufacturers.

This is an F-tab patio door roller assembly with a 1-1/2 inch concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 inch wide and 1-5/8 inch tall with a rear adjusting screw. Used by Doormaster, Starlite and a variety of other patio door manufacturers.

This is a plain back patio door roller assembly with a 1-11/16 in. concave or grooved nylon ball bearing roller used by Arcadia and a variety of other patio door manufacturers. The stamped steel housing has a unique design that is 3/4 in. wide, 1-5/16 in. tall and 2-11/16 in. long with an adjustment screw located on the back end. See Prime-Line part D 1731 for the tall version.

This is a E-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 19/32 in. wide with 7/8 in. dimples, 1 in. tall and 2-1/8 in. long. It features a rear adjusting screw. Used by Viking and a variety of other sliding patio door manufacturers.

This 1-1/8 inch C-tab tandem roller assembly is designed for a variety of sliding patio doors. It features two steel ball bearing rollers in an adjustable stamped steel housing for smooth, quiet operation. The C-tab mounting fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together, ensuring a secure fit. The housing measures 11/16 inch wide with a 7/8 inch dimple width, 1-1/16 inch tall, and 3-1/8 inches long. Rear adjustment allows precise alignment during installation. A Phillips head screwdriver is required.

Heavy Duty Lawn Aerator Tool:This lawn aerator roller features 42 high-density solid steel spikes, each 2 in deep, designed to penetrate compacted soil and deliver air, water, and nutrients straight to the roots. The roller can be filled with sand or stones to add weight, using gravity to boost penetration as the spikes rotate smoothly into the ground. Built with a thickened, fully welded steel handle, it’s sturdy, rust-resistant, and made to last. The 70.47-inch ergonomic height allows comfortable upright operation

I like the unit but handles would be better. I added a set and made it so much more comfortable. Lucien. Cornwall, ON. Fri May 15 2026

Elevate your fitness routine and performance skills with this professional aerial hoop lyra. Designed for aerial fitness, dance, yoga, and acrobatic training, this durable stainless steel hoop helps improve flexibility, balance, core strength, and body control while creating elegant aerial movements. Featuring a single-point suspension design and a complete rigging kit, it is suitable for both beginners and experienced aerial enthusiasts looking to train, perform, and build confidence in the air.

These rollers are constructed of steel components and include a set of installation nuts and bolts for each. Each wheel has a concaved (center grooved) edge and features a steel inner race, steel ball bearings and a 1/4 inch inside diameter hole. The outside diameter of these rollers measures 1-1/4 inch and the width (or thickness) is 5/16 inch. These wheels are commonly used to repair damaged sliding patio door roller assemblies in both the glass and screen sliding door panels. These wheels are used by a variety of patio door manufacturers.

Replace damaged or missing patio door rollers with this 1-1/4 inch plain back tandem roller assembly. Designed for a variety of sliding glass door manufacturers, it features two concave steel ball bearing wheels in a durable stamped steel housing. Each wheel has a 5/16 inch width with a steel inner race and ball bearings for smooth, quiet operation. The housing measures 1-1/32 inch tall, 11/16 inch wide, and 3-1/8 inch long, with a 1/4-20 threaded mounting hole on the back and an optional hole on top. Adjustable height allows precise alignment, though a mounting screw (1/4-20 inch) may need to be purchased separately. Ideal for DIY homeowners or contractors, this assembly restores effortless sliding door operation.

This is a sliding window in a black plastic housing with a flat-edged stainless steel ball-bearing roller. Features a stainless steel roller insert carrier.

Listing is for four (4) 2" diameter spherical polyolefin wheel light furniture and fixture casters with brakes and 7/16" diameter x 7/8" length grip ring stem and hooded windsor antique finish. Supports up to 75lbs/caster.

This is a sliding window roller assembly made of extruded aluminum bracket with a flat edge steel ball bearing roller. These brackets are used on international imperial series 1200 windows and a variety of other window manufacturers.

This is a universal design roller. It has a 1-1/4 in. steel ball bearing roller. Adjustable diecast housing assembly. Used by Fleetwood, Full view and a variety of other glass door manufacturers.

Replace or repair broken or missing sliding door rollers with this Prime-Line D 1998 Steel Sliding Door Roller Assembly. The stamped steel patio door rollers replacement is adjustable. This door roller assembly is used by a variety of metal framed sliding patio door manufacturers. Made of stamped steel housing with a yellow finish, these sliding door rollers are strong, durable, and built to last. The housing of the sliding door rollers replacement is 11/16 inches wide by 1-11/16 inches deep and 2-3/4 inches long. The concave ball bearing steel roller is 1-1/2 inch. A Phillips head screwdriver is required for installation. Use the screw in the front of the housing to adjust ride height. For further roller assembly sliding door dimensional information, please see the line drawing.

Upgrade your sliding doors with this back mount tandem roller assembly, designed for Andersen wood patio doors and compatible with many other wood door brands. Two 1-1/4 inch concave steel ball bearing rollers ensure smooth, quiet operation, while the stamped steel housing with side adjustment makes precise alignment simple. Top insert points and side locking tabs secure the assembly for long-lasting performance. Perfect for DIY homeowners or contractors, this durable roller assembly restores effortless sliding and improves door longevity. Installation is easy with a standard Phillips head screwdriver.

Anonymous. US. Sat Apr 12 2025

"Restore smooth sliding door operation with this plain back patio door roller assembly, designed to replace worn or damaged rollers on a wide variety of sliding patio door systems. Featuring a 1-1/4 inch concave (grooved) steel roller, this assembly helps provide reliable tracking and smooth door movement while supporting consistent performance during everyday use. The roller is equipped with precision ball bearings that reduce friction and promote easier sliding, helping minimize strain when opening and closing patio doors. Its durable steel construction is designed to withstand frequent operation, making it a dependable replacement for residential and light commercial applications. This assembly features a plain back housing with a rear-adjusting design, allowing for convenient door height and alignment adjustments during installation. The housing measures 3/4 inch wide, 1-1/8 inch tall, and 2-5/8 inch long, making it important to compare dimensions with your existing roller assembly before ordering. For installation flexibility, the housing includes a 1/4-20 threaded mounting hole on the back end as well as an optional #10-32 threaded hole on the top, accommodating a variety of patio door configurations used by different manufacturers. Whether you're repairing a sticking sliding door or replacing a worn roller assembly, this replacement component helps restore smooth, reliable operation. Be sure to compare the roller style, housing dimensions, and mounting configuration with your existing hardware to ensure proper fit and compatibility."

This is an F-tab patio door roller assembly with a 1 inch concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is then captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 inch wide and 1-3/16 inch tall with a 7/8 inch dimple width. Used by Lupton and a variety of other sliding patio door manufacturers.

This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 in. wide and 1-3/16 in. tall with a dimple width of 7/8 in. used by Northrup and a variety of sliding patio door manufacturers.

This is a K-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 3/4 in. wide and 1-1/4 in. tall with a dimple 7/8 in. wide. The dimples insure a tight fit within the patio door's bottom rail. Used by a variety of door manufacturers.

This is an F-tab patio door roller assembly with a 1-1/4 inch concave nylon ball bearing roller. When the corner screw passes through the F-tab the assembly is then captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 inch wide and 1-3/16 inch tall with a 7/8 inch dimple width. Used by Lupton and a variety of other sliding patio door manufacturers.

This is a unique back tandem roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The housing is 13/16 in. wide with a 1-1/8 in. flare, 1-15/32 in. tall and 4-1/2 in. long. It has two machine threaded mounting screw holes on the top of the housing and two 1/4-20 threaded mounting holes on the end.

Replace or repair worn or broken sliding door rollers with this 1-1/2 inch unique back tandem roller assembly. Compatible with a variety of vinyl, aluminum, and wood sliding patio doors, it features two concave (or grooved) steel ball bearing rollers in a durable stamped steel housing with rear adjustment for precise alignment. The housing measures 3/4 inch wide, 1-1/8 inch tall, and 3-1/8 inches long, with a #10-32 threaded mounting hole on the back and an optional threaded hole on top for versatile installation. Ideal for DIY homeowners or contractors, this assembly restores smooth, quiet operation.

Upgrade your sliding patio doors with this 1-1/2 inch stainless steel tandem roller assembly, compatible with a variety of metal or vinyl framed doors. The plain back stamped stainless steel housing contains in-line tandem concave stainless steel ball bearing rollers, delivering smooth, quiet operation and long-lasting durability. Rear adjustment allows precise alignment during installation, and a 1/4-20 threaded mounting hole on the back (with optional #10-32 threaded hole on top) ensures a secure fit. Built to resist corrosion, this roller assembly performs reliably in severe weather conditions. Ideal for DIY homeowners or contractors, installation requires only a Phillips head screwdriver.

Replace or repair worn sliding door rollers with this 1-1/2 inch plain back tandem roller assembly, compatible with a variety of vinyl sliding patio doors. It features two concave (or grooved) steel ball bearing rollers in a durable stamped steel housing with rear adjustment for precise alignment. The housing measures 3/4 inch wide and 1 inch tall, with a #10-32 threaded mounting hole on the top for secure installation. Ideal for DIY homeowners or contractors, this assembly restores smooth, quiet sliding performance.

This is a unique one of a kind trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two existing screws in the door. Purchase the Prime-Line part D 1548 for the steel roller version.

Had a sliding door that was hard to open.... These rollers worked perfectly! The sliding door now works like a charm. Perfect!!. Beverly B. Orange County, CA. Mon Feb 24 2025

This 1-1/4 inch C-tab tandem roller assembly is designed for Pacific, Elco, and a variety of other sliding patio doors. It features 1-1/8 inch concave stainless steel ball bearing rollers in an adjustable stamped stainless steel housing for smooth, quiet operation. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together, ensuring a secure installation. The housing measures 11/16 inch wide with a 13/16 inch flare, 1-1/16 inch tall, and 3-1/8 inch long. Rear adjustment allows precise alignment, and mounting hardware is included. A Phillips head screwdriver is required for installation.

This is a C-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. As the C-tab is positioned around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 9/16 in. wide and 1-3/8 in. tall with a 3/4 in. dimple width. Used on Window Master patio doors. It replaces the original K-tab style that is no longer available.

This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a variety of other sliding patio door manufacturers.

This 224L 8 cubic feet horizontal portable cement mixer is a versatile and powerful tool for any construction or DIY project. With its generous drum capacity, you can handle larger batches of materials with ease, making it ideal for various applications. The 3/4HP motor delivers reliable power, ensuring consistent performance for both light and heavy-duty tasks. Designed to operate on standard 115V power supply and 60Hz frequency, this unit runs efficiently with only 4.8 amps, making it compatible with most outlets. Safety is a top priority, as the 3-prong grounded plug ensures a secure electrical connection and prevents hazards. The 28-inch drum diameter and 23 RPM rotation speed provide smooth and efficient material processing. Equipped with two 12-inch pneumatic wheels, this mixer is easy to move, even when fully loaded, ensuring smooth and quick transportation. Whether you are working on a small home project or a large construction site, this portable cement mixer offers the perfect balance of power, efficiency, and mobility.

This heavy-duty drywall lifter panel hoist is crafted from robust steel, offering exceptional strength and a 150 lb load capacity for all your drywall installation needs. Its adjustable reach, 360° rotation, and tilt functions make it highly versatile for ceilings of any angle or height. Featuring a stable tripod base and tool-free assembly, this drywall lift is the ideal helper for professionals and DIY enthusiasts working solo.

Very easy to use and super helpful! Easy to put together. Makes putting up drywall so much easier!. Anonymous. Sun Apr 05 2026

This unique back tandem roller assembly features two 1-1/2 inch concave (grooved) steel ball bearing rollers in a durable stamped steel housing. Designed for a variety of patio door manufacturers, the housing measures 13/16 inch wide with a 1-1/8 inch flare, 1-15/32 inch tall, and 4-1/2 inches long. It includes two machine-threaded mounting holes on top and two 1/4-20 threaded holes on the end for secure installation. Rear adjustment ensures smooth, quiet operation and precise alignment. Ideal for DIY homeowners and contractors, this roller assembly restores effortless sliding door performance.

This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/4 in. tall with a flare width of 13/16 in. with a rear adjusting screw. Features a 1/4-20 machine thread mounting hole on the plain back end and a #10-32 threaded optional use hole on the top. Used by Blomberg and a variety of other manufacturers of vinyl and metal sliding patio doors.

This is a stainless steel, plain back, patio door roller assembly with a 1-1/2 in. concave stainless steel ball bearing roller. It has a stainless steel plain back housing that is 3/4 in. wide, 1-1/4 in. tall and 2-5/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on the top. It is used by Daryl, Patio Magic and a variety of other manufacturers of sliding patio doors.

This is a 1-1/4 in. plastic ball bearing roller with adjustable steel housing assembly. It has a 3/4 in. overall thickness flare to flare. Used by Smith and Carry and a variety of other glass door manufacturers.

Introducing our Swivel Hooded PVC Ball Caster – the perfect blend of elegance and functionality for your furniture. With its captivating antique brass finish, this caster adds a touch of sophistication to any space, enhancing the overall aesthetic of your home or office. Measuring 1-1/2" in diameter, its sturdy construction ensures long-lasting durability, making it a reliable choice for everyday use. The smooth swivel action allows for effortless mobility, offering 360-degree rotation to glide smoothly in any direction. Worried about scratches? Fear not! The soft PVC ball protects delicate flooring like hardwood and tile, preserving their pristine condition. Installation is a breeze with the 5/16-18 x 1" long threaded stem, ensuring a secure and hassle-free attachment to your furniture. Elevate your furniture's style and functionality with our Antique Brass Swivel Hooded PVC Ball Caster – a timeless addition that promises to revitalize your living and working spaces.

This product is a set of heavy-duty brass casters. The pure brass body creates a metallic texture, and every part of it embodies the quality of heavy processing. The surface is brushed, with bright colors and beautiful fashion. It can easily glide over hardwood floors, carpets, mats, and more without causing damage.

They are as pictured. Price reasonable. Delivery fast. I have not attached them to the storage chest I am renovating so I can't comment on how well they move at this time.. Karen. West Bloomfield, MI. Sat Mar 28 2026