Primeline 9005868

This ADA compliant slide latch is constructed of stamped stainless steel and comes in a satin finish. It is a surface-mounted latch that is designed for use on 1 in. thick swing-in partition doors, and it comes complete with an "occupied" indicator and a matching stainless steel keeper. The exterior indicator has a dial-type internal mechanism that announces a locked door (or an occupied stall) with red color when the lock is engaged. When the slide lock is in the unlocked position, the dial indicator reveals a green color, or unoccupied state, announcing its availability for use. For access to the locked stall, the exterior indicator also comes equipped with a stainless steel pull and a slotted barrel nut which can disengage the lock from the exterior in the event of an emergency. This latch mounts over a durable, black plastic base with its mounting holes spaced apart at 1-3/8 inches, and it features a 1-3/16 in. bolt throw. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

White

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Wed Jul 16 2025

These pilaster shoe kits are constructed of an 18 ga. steel anchor bracket and a 22 ga., satin finished stainless steel pilaster shoe. They feature a 3 in. tall reach and oval ends. Each bracket is slotted at the horizontal base, on each end for ease of install. The anchor brackets are used to install the pilaster shoes in commercial restroom partitions, and all installation fasteners are included with each kit.

It is a surface-mounted Bobrick-style latch that is designed for use on swing-in partition doors, and it comes complete with a matching keeper and stainless steel fasteners. This latch mounts over a durable, black plastic base with its mounting holes spaced apart. This restroom stall slide latch also features a tension adjustment clip that is embedded within the black plastic mounting plate, concealed beneath the stainless steel surface of the lock. The tension clip can be adjusted to create or reduce resistance between the plastic insert and the metal housing. Setting the amount of force needed to slide the latch from left to right is as easy as bending the clip away from the plastic base to increase the tension, and bending it towards the plastic base to decrease tension. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

Stainless Steel, 3.85" H x 4.3" W x 0.3" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

Stainless Steel, 6.05" H x 3.85" W x 0.55" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Beautiful. Would be better if all the screws were long. You get 2-1” screws and 1- 3”screw. It’s also a little pricey compared to the black and silver. It would be nice if they’d make a satin gold instead of the shiner old fashion gold.. Angela. Fort Worth, TX. Wed Jan 11 2023

Silver

Upgrade your storm and screen door latching system with the Prime-Line K 55177 Interior Latch, designed for versatility, durability, and a secure fit. offer long-lasting performance while enhancing your door hardware. The set includes brown screws ensuring the perfect fit. Designed for use with similar inside latches. For added convenience, installation fasteners are included for a quick and hassle-free setup. Choose the Prime-Line K 55177 for a secure, reliable, door latching solution.

Antique Brass, 9.75" H x 5.2" W x 2.45" D

Upgrade your door security with this antique brass lock and door reinforcer, designed to help prevent forced entry by strengthening the vulnerable area around your lock. Perfect for repairing or reinforcing both metal and wood doors, this plate fits 1-3/4-inch thick doors with mortise or drive-in latches. Crafted from durable solid brass or stainless steel with an elegant antique brass finish, it features two 2-1/8-inch bores spaced 3-5/8 inches apart and offers backset options of 2-3/8 inches or 2-3/4 inches. The non-recessed plate comes pre-punched for easy installation, and all necessary mounting hardware is included. Please review the line art drawing for exact measurements before purchasing, as this item is not universal.

This bottom hinge kit includes components constructed of various materials, and the main hinge bracket comes in a chrome-plated finish. The post-mounted gravity pivot hinge bracket fits on 1-1/4 in. thick posts and panels that have round cut edges. This bracket features a 1-5/32 in. key dimension, and the T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with centre pins. The pintle has an outside diameter of 5/8 in.. This hardware is designed for use with partition hardware by Flush Metal.

4.4" H x 4.7" W x 1.05" D

Prime‑Line® clothesline hooks provide a simple, dependable solution for hanging and supporting clotheslines, ropes, and cords around the home or yard. Designed for easy installation into wood, walls, or posts, these hooks offer reliable holding strength for indoor and outdoor laundry setups, gardening projects, garage organization, and general utility use. Manufactured from quality materials for durability and corrosion resistance, Prime‑Line clothesline hooks are built to withstand daily use and varying weather conditions while keeping lines securely in place. Their open‑hook design allows for quick attachment and removal, making adjustments fast and convenient for DIY homeowners. Trusted by households across the U.S., Prime‑Line clothesline hooks make it easy to set up, maintain, or upgrade functional hanging solutions with confidence and ease.

These are bore reducer rings. Constructed of steel and comes brass-plated. They allow 1-1/2 inch and 1-3/8 inch lock cylinders to fit into a 2-1/8 inch diameter bore. Comes with everything you need for a quick and easy installation.

This bottom hinge kit includes components constructed of various materials, and the main hinge bracket comes in a stainless steel satin finish. The post-mounted gravity pivot hinge bracket fits on 1 in. thick posts and panels that have square cut edges. This bracket also features a 1-9/32 in. key dimension, and its pintle has an outside diameter of 1/2 in.. This hardware is designed for use with partition hardware by General Applications.

These 5/16 inch by 7/8 inch aluminum screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 5/16 x 7/8 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The miter cut design is largely used for larger screen frames, or in high wind areas or when pets are a concern for DIY users across the United States. Made from stamped aluminum, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The miter cut leaves a clean corner design that makes the screen frame look amazing. Installation is quick and does not require tools, fasteners, or adhesives, however a mallet or wood block are often used to seat the corners. Each package includes 20 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

This Handyman Spring Assortment contains a variety of small extension and compression springs that provides a handy kit for repairs and replacement of standard spring sizes. Sizes range in diameter, length, wire gauge and end types, and has an average of 84 springs. For best results, follow the installation instructions included with each package. These parts are easy to replace using only a few simple tools. The outside diameters, lengths and gauge thicknesses vary between each of these springs, while their dependability does not. Use these springs for repairs around the house, in the office, vehicle, garage and in many other applications. Please refer to the line art drawing for dimensions and compare with your needs before purchasing.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

This is a tension spring, flat, 3-1/8 inch length, heat treated steel, mill. Holds window screens into sliding aluminum window screen channels. Tension springs constructed from heat treated spring steel. They feature a round top design and require two 3/16 inch holes drilled 3-3/16 inch apart.

Brushed Brass

Happy with the quality of the product. Edward. Talent, OR. Sun Jul 25 2021

These pivot hinge pins are constructed of steel and come in a zinc-plated finish. They feature a knurled (grooved) and female 10-24 threaded end on one side, and a spear with a snap-lock notched end on the other. This pivot hinge pin has a 1/4 inch outside diameter and measures 2-15/16 inches in length. Replacement hardware like these is used together with other General pivot hinge accessories for the repair of restroom partition doors.

These wall brackets are constructed of stainless steel and they come in a satin finish. This repair kit includes a total of two (2) U-brackets, and two (2) one-ear wall brackets, together with all the fasteners necessary for their complete installation. All brackets in this kit are designed for use with 1 in. thick restroom partition panels. The single ear brackets can be mounted to the left or right side of the panels, and they have a 2-1/2 in. overall reach, with a 2-1/2 in. wide base. The U-brackets feature a 2-hole mounting base, an overall reach of 1-1/2 in., and 1-1/4 in. overall U-bracket width. Besides being used for new installs, brackets like these are commonly used to repair and replace broken, or missing wall brackets. Wall brackets like these are manufactured with various dimensions for use with different panel thicknesses, as well as in alternate finishes. These restroom partition wall brackets are used by many, and they are simple to install. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.

Black

Elevate your kitchen with the FOTILE 30"" Range Hood JQG7507, blending advanced functionality with a sleek, modern aesthetic. This under-cabinet/ wall mount prestige performance series range hood is crafted from black tempered glass and boasts a powerful 1100 CFM capacity to ensure efficient smoke and odor removal. This range hood offers a quiet cooking environment, operating at a minimum noise level of 38 dB. The anti-glare, smudge-resistant AG glass enhances visibility and helps keep your kitchen looking clean and stylish. Equipped with Sync Connect technology, the JQG7507 range hood automatically syncs with your cooktop, activating the third fan level and LED lighting when the cooktop is in use. The convenient 5-minute delay shut-off feature ensures residual smoke and odors are fully extracted after cooking. Additionally, the automatic capture shield opens and closes at a precise 90-degree angle, effectively containing smoke and grease to maintain a cleaner, safer cooking area. This combination of powerful performance and thoughtful design makes the FOTILE JQG7507-W range hood a standout choice for any modern kitchen.

Works well so far. James H . Illinois. Sun Dec 21 2025

Robust 7.0 HP 212cc 4-stroke OHV engine-powered tiller cultivator, designed to break through even the most compacted ground, preparing a loose, fertile soil bed ideal for your upcoming planting projects.

These are wire tension springs made of spring steel. Designed to retain window screens in aluminum window frames through tension.

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood, it is especially important to pre-drill a hole. These stainless steel screws are rust and corrosion resistant.

600-CFM, internal or in-line blower for use with Zephyr kitchen vents. This quiet but powerful blower is located close to your own draft to directly and efficiently exhaust airborne cooking contaminants. Please check your Zephyr range hood's specification sheet to ensure compatibility.

Very Powerful, easy to install. Great design! I definitely recommend it along the Zephyr 36 inch downdraft. It arrived right on time for the holidays. I had a great experience ordering from this site.. Reynold. Trumbull, CT. Tue Dec 02 2025

Designed for an uncompromising clean, the Roomba® Max 705 Combo Robot + AutoWash™ Dock delivers heated mopping with a self-cleaning, extending roller mop and first-of-it-kind cover that protects carpets from wet messes. Dual Edge-Sweeping Brushes, Dual Rubber Brushes and Carpet Boost eliminate deep-down debris, wall-to-wall. Advanced 3D mapping ensures smooth navigation throughout your bustling home. Your robot identifies and adapts to clean around objects, auto-adjusting to activate just the right settings for the task. The powerhouse dock auto-empties debris, heat washes and dries the roller mop, and refills cleaning liquid to keep floor-cleaning forever fresh.

Very function, smart and efficienct. Davi. Woburn, MA. Fri Jan 30 2026

The Defender Security U 9591 Stainless Steel Lock and Door Reinforcer assists in preventing forced entry by reinforcing the weak spot of your door. It can be used to reinforce and repair metal, fiberglass and wood doors. Constructed of stainless steel, the lock reinforcer plate comes in a natural stainless steel finish.  All the necessary mounting hardware is included for a quick and easy installation. The lock reinforcement plate is pre-punched for mounting. The reinforcer is designed for snug fit on a 1-3/8 inch thick doors that have mortise or drive-in latches. Measuring 4-5/16 inch wide by 4-1/2 inch tall, the reinforcement plate accommodates key-in knob locksets on doors that have 2-1/8 inch bore sizes, with a backset of 2-3/4 inch from the edge of the door. The door reinforcer is non-recessed to fit over your existing latch.

These window screen tension springs are constructed of heat treated spring steel and come in a zinc plated finish. Tension springs of this style mount into the corners of 45 degree cut aluminum screen frames and add holding tension when inserted into sliding window screen channels. These tension springs will fit into 5/16 inch or thicker screen frame material. No tools are required for these easy to install tension springs.

Be ready to serve up your best parties yet, with a kegerator and beverage cooler that is versatile enough for even the most creative of hosts. This sleek, stainless steel, hybrid kegerator can accommodate multiple keg configurations and easily converts to a beverage cooler with a glass display window when a keg is not installed. Purchase one of our single, double, or triple tap kits (sold separately) to complete your dream configuration. Featuring a pro handle, kickplate with lock, optional casters, and guardrail, plus mood-enhancing, 3-color LED lighting.

Great quality! So far it’s been great! This fridge was packed really well and arrived in perfect condition. I like how the door is reversible and the inside is a black metal with shelves and lights. Lower quality keg coolers do not have this. Great purchase my husband thinks it’s great. We haven’t put a keg in it yet but so far we love it!. Kathy. Ponoka, AB. Sun Jan 26 2025

These deluxe screen shears are constructed with molybdenum steel edges and come finished in black paint. These shears are designed to resist abrasions and offer easy cutting action when used to cut fiberglass and aluminum screening.

The 4 In. x 2 Ft. Builder's Best Semi-Rigid Push-Fit Duct is designed for short-distance dryer venting connections. Collars can be attached for secure attachment to the dryer and wall pipe. It is a class 0 aluminum duct that is fire-resistant.

Penny. Brunswick, GA. Sun Feb 22 2026

1000-CFM, in-line blower for use with Zephyr range hoods. A powerful yet quiet blower — it exhausts the cooking area from a remote location. Installed remotely in the interior of the home, it is not restricted by exterior applications. Please check your Zephyr range hood's specification sheet to ensure compatibility.

Guy. Goodyear, AZ. Tue Aug 27 2024

11.81" H x 14.57" W x 14.57" D

Internal blower for use with Zephyr range hoods. This quiet but powerful blower is located within your range hood's structure, living closer to your filters and cooking space to directly and efficiently filter more air contaminants. Please check your Zephyr range hood's specification sheet to ensure compatibility.

Great Internal blower, 3 Variable speeds, easy install with Zephyr hood. I used this blower with the Layers hood and it really vents well. I am using a 30" commercial grade range and I have really noticed an improvement.. Pierson. Denver, CO. Tue Oct 11 2022

11" H x 7" W x 7" D

10-inch, 6-inch, and 8-inch round, universal make-up air damper kit for use with any Zephyr range hood motor operating over 300 CFM and up to 1,200 CFM, 600 CFM, and 1,000 CFM. When range hoods exhaust air out of your home, negative air pressure is created unless fresh outdoor air replaces the exhausted air. Zephyr’s make-up air damper is designed to balance the air pressure in your home by automatically opening it to allow fresh air while the range hood is operating.

Awesome product… fits hood perfectly. Sandra. Carson, CA. Mon Feb 21 2022

Matte Black

Compatible only with Larson Storm Doors. Sold separately and required to operate the built-in deadbolt on Platinum Collection Storm Doors.

My husband said this was not the easy door handle to install but now that it’s done it looks great with my Larson door!. Angela. Friendsville, TN. Sun Mar 08 2026

1,000-CFM, external blower for use with Zephyr range hoods. This powerful, exterior-mounted blower mounts on a roof or an outside wall and exhausts airborne contaminants such as smoke and food particles from cooking and living spaces. Please check your Zephyr range hood's specification sheet to ensure compatibility.

Your second installation for kitchen remodeling project. External is the best way to keep the sound down in the kitchen. This unit is perfect.. Daniel. West Hollywood, CA. Wed Aug 06 2025

Your outdoor entertaining just got upgraded with a kegerator and beverage cooler that is versatile enough for even the most creative of hosts. This corrosion-resistant, stainless steel, hybrid kegerator can accommodate multiple keg configurations and easily functions as a beverage cooler when a keg is not installed. Purchase one of our single, double, or triple tap kits (sold separately) to complete your dream configuration. Optional accessories include casters and a drink guardrail for use in freestanding installations. Also certified for indoor use.

Matte Black

The upscale styling of this Verity Single Handle Wall Mounted Shower Trim Kit was inspired by the square designs of modern architecture. This shower trim kit includes a showerhead, shower arm, escutcheon, hand spray with 60 inch flexible hose, a slide bar for the hand spray, shower lever handle, and integral diverter handle. The valve cover plate features hot and cold indicators to ensure custom water temperature setting and ease of use for everyone. At a low flow rate of 1.5 gallons per minute, the single mode showerhead conserves water without affecting performance, saving you money on your water bill. This model includes everything you need for quick installation, allowing you to update your bathroom without replacing your valve. With durable features that are built to last and a unique, affordable style, the Symmons Verity Single Handle Wall Mounted Shower Trim is a quality addition to any modern bathroom and is backed by our limited lifetime.

The quality is great. The shower looks beautiful and has a modern look.. Susan. Arlington, MA. Mon Mar 31 2025

Brushed Brass

Enhance your bathroom or kitchen with our stylish ½” x 6” Nipple! This versatile piece is the perfect finishing touch you've been looking for. Whether you need to extend the stub-out for a wall or floor-mounted shut-off valve, or you're looking for a sleek ceiling-mounted shower arm, this versatile nipple extension has you covered. With its male ½”-14 NPT x female ½”-14 NPSM threading, it effortlessly fits most plumbing applications

as described, item arrived a little to late, my husband had already found a way around what we needed to connect.. Stephanie. Uniondale, NY. Wed May 07 2025

42"

Terisitar brings modern elegance to your kitchen. Thick 1mm 430 stainless steel resists grease and feels sturdier. Powerful 900 CFM suction clears smoke and odors fast, keeping your kitchen fresh. 4-speed controls include touch, gesture, or remote. Set a 1-15 minute delay to clear lingering smoke. 2 dimmable 4000K LED bulbs provide even light. Only 40 dB on lowest speed. Flexible installation lets you choose ducted or ductless (charcoal filter included) to fit your kitchen. The dishwasher-safe filter traps grease for quick, easy cleaning. ETL certified with 5-year parts and 10-year motor warranty. 24/7 support — we treat every inquiry like family.

Very high quality material and comes assembled. The stainless steel finish is very nice and easy to clean. Motor is more than adequately powerful when cooking and frying. Vent surface easily removed to clean and replace.. Roxanne. Derwood, MD. Sun Mar 29 2026

Hello! We are ARK DESIGN, a leading brand deeply rooted in the door industry. We are committed to crafting premium doors for discerning individuals, making every opening and closing a testament to our meticulous craftsmanship and quality, and enhancing your daily life with beauty and elegance.

Worked great! Looks good!. Vicki. Pikesville, MD. Wed Mar 11 2026

ADA-compliant, wireless RF remote control with battery. Featuring a sleek stainless steel exterior, and equipped with a magnet on the back for easy storage on any magnetic surface. Maximum remote control communication distance is 15 feet from the hood. Please check your Zephyr range hood's specification sheet to ensure compatibility.