Nylon Housing With Nylon Rollers Sliding Window Roller Assembly 2 Pack Primeline G 3176

This amulet is the feng shui cure to bad fortune. It is the feng shui product to turn bad fortune into good fortune. The auspicious words on it are Zhuan Yun Qian Kun.

This sliding window roller assembly is constructed from nylon. It is attached to nylon housing and has flat edge tandem rollers. This style roller is used by a variety of window manufacturers.

This flat edge sliding window roller is constructed from nylon. It comes affixed to a nylon housing. This style roller fits on Guaranteed Products and other similar styled sliding windows.

Restore smooth, effortless operation to your sliding patio door with this Tandem Stainless Steel Roller Assembly. Designed with a unique bottom-mount housing, this roller assembly is commonly used on Andersen sliding patio doors and many other wood patio door brands. It is an ideal choice for homeowners and DIY installers seeking a durable replacement solution. The assembly includes two 1-1/2 inch concave stainless steel ball bearing rollers housed in a corrosion-resistant stainless steel frame. This construction provides strength, durability, and long-lasting performance, especially in coastal or high-humidity environments where rust and corrosion are common issues. The stainless steel housing measures 11/16 inch wide, 1-3/16 inches tall, and 4-5/8 inches long, with a mounting tab at each end for secure installation. It is designed to fit into a mortised pocket in the bottom rail of the door. For added convenience, the roller assembly features a side adjustment mechanism, allowing you to fine-tune the door height and alignment with a standard screwdriver. Whether you are repairing an Andersen sliding door or replacing worn rollers on another wood patio door, this stainless steel roller assembly provides a reliable and long-lasting solution to keep your door gliding smoothly. Please refer to the line art drawing for exact dimensions to ensure compatibility before purchasing, as this is not a universal part.

This is an all nylon roller assembly used on Likit patio doors. The housing is nylon with a bronze bushing axle for the 1-5/16 inch nylon roller. They are NON-ADJUSTABLE. They slide into an extruded channel inside the patio door's bottom rail. Used by Likit in the 1970's. Each roller has a maximum load rating of 50 lbs. The two rollers on the door will accommodate a 100 lb. door.

House Guard Sliding Door Roller with Nylon Wheel Side Adjust Tandem Rollers - Can Hold Up to 250 Ib

The Prime-Line N 6965 Mirror Door Roller Assembly is a bottom mount roller assembly used on metal framed mirrored wardrobe doors. Used by Bay King and a variety of other manufacturers, the T-shaped tab on the back end of the mirror closet door rollers slides up into a T-shaped channel in the door frame which holds it in place. The concave nylon ball bearing roller of the sliding door rollers replacement is 1-1/4 inches in diameter. For further roller assembly sliding door dimensional information, please see the line drawing.

Anonymous. Tue Jul 22 2025

Replace or repair broken or missing sliding door rollers with the Prime-Line D 1754 tandem roller assembly, compatible with a variety of patio door brands. Featuring 1-1/2 inch concave steel ball bearing rollers in a durable stamped steel housing with a yellow zinc finish, this assembly delivers smooth, quiet operation and long-lasting performance. It includes a 1/4-20 mounting hole on the back and an optional #10/32 threaded hole on top for versatile installation. Perfect for DIY homeowners and contractors, installation is easy with a standard Phillips head screwdriver. Restore your sliding doors to effortless operation with this strong, reliable roller assembly.

these wheels work great on a 150 lbs door. they slide with no effort. Wayne. Egg Harbor Twp, NJ. Sun Jan 04 2026

The listing is for a set of four (4) service caster series #30 swivel casters with 6" diameter by 2" wide nylon wheelss with bolt-on swivel locks capable of supporting a total weight of 5,000 lbs. (1,250 lbs. per caster).

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This spring tension roller assembly is used by DorWal, Guardian as well as a variety of other sliding patio door manufacturers. It has a flat tension spring, steel housing and a 1-1/4 Inch high-density polyethylene roller. The roller installs into the door by snapping onto the existing diecast door frame corner. These can be used as top or bottom rollers. Order yours today and have your door slide like new.

These rear drawer track sockets are constructed from durable plastic and come white in color. It fits on most side-mounted drawer track systems. This style of drawer track support brackets accepts most ball-bearing drawer slides allowing for front-to-back adjustment of the drawer slides. Installation is quick and easy, and all fasteners are included. The maximum load rating is 75 lbs. per pair.

This is a unique one of a kind trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two existing screws in the door. Purchase the Prime-Line part D 1548 for the steel roller version.

Had a sliding door that was hard to open.... These rollers worked perfectly! The sliding door now works like a charm. Perfect!!. Beverly B. Orange County, CA. Mon Feb 24 2025

Door rollers are essential components used in various types of doors, including sliding, folding, and pocket doors. These small but mighty devices play a crucial role in enabling smooth and effortless door operation. Typically made from durable materials such as steel or nylon, door rollers are designed to fit into a track system, allowing the door to glide open or closed with minimal effort.

Listing is for a set of four (4) swivel casters, four (4) swivel casters with 5” diameter by 2" wide nylon wheel and roller bearings. Supports a total weight of 1,800lbs (450lbs/per caster).

Listing is for a set of four (4) service caster series #30 swivel casters with 5" diameter by 2" wide nylon wheels with bolt on swivel locks capable of supporting a total weight of 3,600 lbs. (900 lbs. per caster).

This is a sliding window in a black plastic housing with a flat-edged stainless steel ball-bearing roller. Features a stainless steel roller insert carrier.

Outsunny garden lawn roller is suitable for quickly flattening your lawn when sowing seeds or levelling the surface. With a comfortable U-shaped handle, it can be easily pushed and pulled. You can add up to 11 gallons (38 L) of water or sand for a maximum weight of 136 lbs. (62 kg). Crafted from high-quality steel with a coated finish, this garden roller is built to last. Our efficient garden flattener makes your time in the garden enjoyable and hassle-free.

It was easy to assemble. Once filled with water, it was helpful in rolling the new sod. Anonymous. Willoughby, OH. Sat Jun 28 2025

This 1/2 inch steel roller comes secured in a nylon constructed housing. These rollers install two per track and help keep your windows energy efficient. Used on Superlite series 8000 windows.

The listing is for one (1) service caster series #30 swivel caster with a 4" diameter by 2" wide glass-filled nylon wheel with a side lock brake & bolt-on swivel lock capable of supporting 1,200 lbs./caster.

This is a plain back patio door roller assembly with a 1-11/16 in. concave or grooved nylon ball bearing roller used by Arcadia and a variety of other patio door manufacturers. The stamped steel housing has a unique design that is 3/4 in. wide, 1-5/16 in. tall and 2-11/16 in. long with an adjustment screw located on the back end. See Prime-Line part D 1731 for the tall version.

Did the trick and saved me 400 for a new door. Thanks Wayfair!. Rickto. Toronto. Sat Apr 17 2021

Listing is for one (1) rigid caster with a glass filled nylon wheel and roller bearing capable of supporting 450lbs./caster.

This is a black plastic housing sliding window roller assembly. It features a flat-edged plastic wheel with a 3/4 in. outside diameter, with stainless steel ball bearings.

This is a sliding window roller assembly used as a bottom roller on heavy sliding glass windows, with an adjustable steel housing and plastic ball-bearing center grooved roller.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This high-tension steel spring roller assembly fits onto the Columbia Uni-Fit series door. This roller assembly has a 1-inch diameter high-density polyethylene roller mounted in the housing. The flat steel spring end catches onto the inside of the door frame while the flat edges of the two tabs extending out in front of the roller restrict the roller from retracting too far up into the door frame as it rolls. This sliding screen door roller assembly insert has a thinner high-density polyethylene frame than the Prime-Line part B 646. It has an adjustable high-density polyethylene inner housing and high-density polyethylene roller. The assembly inserts into the bottom or top of the sliding screen door using the included screws. The roller adjusts to the correct position needed. This style is found on Columbia sliding screen doors but is also used by a variety of other sliding screen door manufacturers. Please note the dimensions and design when compared with an old roller. Order yours today and have your door slide like new.

This nylon-constructed guide bracket houses a 5/16 in. Flat-edged brass roller. The nylon housing holds this roller into the bottom of your rail. Used on Elco/Century windows. Easy to install with a few simple tools in a few minutes. Installation of this roller will make the slide action of your window improve. A Phillip's head screwdriver is required for installation.

Listing is for one (1) swivel caster with a glass filled nylon wheel and a side lock brake capable of supporting 1,250 lbs./caster.

Listing is for one (1) Service Caster, swivel caster with a 4" diameter by 2" wide glass filled nylon wheel and roller bearing and a top locking brake capable of supporting 450 lbs./caster.

The listing is for a set of four (4) service caster series #30 casters, two (2) swivel casters with bolt-on swivel locks, and two (2) rigid casters, with 4" diameter by 2" wide nylon wheels capable of supporting a total weight of 3,200 lbs. (800 lbs./caster).

This is a unique back patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller. The stamped steel housing is 11/16 in. wide and 1-3/8 in. tall. It is rear adjusting with a set of tabs or ears that insert into slots in the door's bottom rail. No mounting screws required. It is used by Premiere patio doors.

This is a sliding window roller assembly made of extruded aluminum bracket with a flat edge steel ball bearing roller. These brackets are used on international imperial series 1200 windows and a variety of other window manufacturers.

The listing is for a set of four (4) service caster series #20 swivel casters, four (4) swivel casters with top lock brakes, 6” diameter by 2” wide high-temperature glass-filled nylon wheel. Supports a total weight of 1,800 lbs (450 lbs/per caster).

Listing is for a set of four (4) Service Caster Series #20 316 stainless steel casters, two (2) swivel total lock brake swivel casters and two (2) swivel casters, with 3” diameter by 1-1/4” wide brown glass filled nylon wheels. Supports a total weight of 1,400lbs (350lbs/per caster).

The Prime-Line N 7536 sliding closet door roller kit ensures effortless movement for your closet doors, providing a seamless sliding experience with durable, top-quality components. This closet door roller kit includes both front and back roller assemblies, offering easy bypass of your sliding doors to ensure a perfect alignment. Built to last, the sliding closet roller kit features sturdy stamped steel brackets and roller wheels, ensuring reliable performance and long-term durability. Designed for straightforward installation, this roller guide kit comes with all necessary hardware, making it simple to replace or upgrade your sliding closet door kit with minimal tools required. The Prime-Line sliding closet door guide kit is compatible with most standard closet doors. For further dimensional information, please see the line drawing provided

The listing is for a set of four (4) service caster series #20 swivel casters, four (4) swivel casters with 5” diameter by 2” wide high-temperature glass-filled nylon wheel. Supports a total weight of 1,800 lbs (450 lbs/per caster).

Listing is for a set of four (4) service caster series #30 casters, two (2) swivel casters with bolt on swivel locks and two (2) rigid casters, with 6" diameter by 2" wide nylon wheels capable of supporting a total weight of 5,000 lbs. (1,250 lbs./caster).

Door rollers are essential components used in various types of doors, including sliding, folding, and pocket doors. These small but mighty devices play a crucial role in enabling smooth and effortless door operation. Typically made from durable materials such as steel or nylon, door rollers are designed to fit into a track system, allowing the door to glide open or closed with minimal effort.

The listing is for a set of four (4) service caster series #30 casters, two (2) swivel casters with side lock brakes & bolt-on swivel locks, and two (2) swivel casters with side lock brakes, with 4" diameter by 2" wide nylon wheels capable of supporting a total weight of 3,200 lbs. (800 lbs./caster).

Listing is for a set of four (4) Service Caster, two (2) swivel casters with side lock brakes and two (2) rigid casters, with 6" diameter by 2" wide glass filled nylon wheels capable of supporting a total weight of 5,000 lbs. (1,250 lbs./caster).

This is a window roller, flat edge, sliding, suitable for use with Adore Hilite sliding windows. This flat nylon constructed roller is used on adore highlight sliding windows. Nylon axle pins also act as a side guide. Installs two per window.

This is a sliding glass door roller assembly. It has a 1-1/4 inch outside diameter. Features a steel ball bearing roller with an adjustable diecast housing.

The listing is for a set of four (4) service caster series #20 swivel casters, two (2) with top locking brakes, with 4" diameter by 2" wide nylon wheel and roller bearings capable of supporting a total weight of 1,800 lbs. (450 lbs./caster).

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This insert style sliding screen door assembly has a high density polyethylene housing with a high density polyethylene roller insert. It is used on the Academy Uni-Fit screen doors. The roller is a 1 Inch steel ball bearing roller and is used on the top or the bottom of the door. Easy to install, by inserting into the open U-shaped frame and inserting the screw. For steel ball bearing see Prime-Line part B 624. Order yours today and have your door slide like new.

These roller assemblies are constructed of stamped steel housings and steel wheels. The housing features flared corners for better gripping power when inserted into the bottom rails of the sliding sash. The wheels feature concave (grooved) edges and are designed to glide over raised tracks. Roller assemblies like these are commonly used in showcase windows and display cabinets that are equipped with sliding glass or wood panels.

Product provided an exact replacement for my 70 year old windows. Should last longer than the nylon rollers included with the windows. Jeff. Pittsburgh Pa Metro. Tue Sep 09 2025

Listing is for a set of four (4) swivel casters with glass filled nylon wheels with top lock brakes capable of supporting a total weight of 5,000 lbs. (1,250 lbs. per caster).

Door rollers are essential components used in various types of doors, including sliding, folding, and pocket doors. These small but mighty devices play a crucial role in enabling smooth and effortless door operation. Typically made from durable materials such as steel or nylon, door rollers are designed to fit into a track system, allowing the door to glide open or closed with minimal effort.

This patio door roller is constructed from steel and has a diameter of 1-1/8 in. It comes affixed to an adjustable steel housing assembly. This roller is used by a variety of glass door manufacturers.

OPTIMAL DIMENSIONS: The roller assembly measures 1-15/16" Width with a 1-1/4" steel wheel, height of 1-7/16", and depth of 19/32".