Diecast White Sliding Window Slam Latch International Window Primeline F 2686

This casement sash lock is constructed of diecast and comes in a white painted finish. It features 3 different strike plates for use with push-out and swing-in casement windows that are not operated with a standard crank-out operator. The steel rim strike (1 in. x 1-3/8 in.) and the diecast surface strike (1/2 in. x 2 in.) included with this item are used for swing-in casements commonly hung with steel butt hinges. The steel mortise strike (11/16 in. x 2-7/16 in.) is for use with push-out casements, also commonly hung with steel butt hinges. Some mortising may be required when installing the rim strike or mortise strike. All fasteners are included with lock hardware. These locks are used on old style wood casement windows.

Prime-Line part F 2931 contains a pair of spring-loaded Tilt Latches and easy-to-follow installation instructions. These tilt latches feature a round-end housing and install on single- and double-hung vertical sliding, tilt-in vinyl sash panels. Vertical sliding windows with tilt-in sash allow for easier cleaning of hard-to-reach exterior glass surfaces.Each latch is constructed of durable 0.345 plastic and they are equipped with corrosion-resistant, long-lasting steel springs. These latches keep each vertical sliding panel locked into their respective paths of travel. Simultaneous disengaged latches allow the sash to tilt inward for thorough cleaning, or tilted in then rotated clockwise or counter-clockwise for easy removal of the sash from window frame.Prime-Line tilt latches like these are used in New York, Pennsylvania and other states. Each package includes one right-hand and one left-hand latch. These latches are used by many to replace damaged or missing tilt latches and they are easy to install.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Will get these installed shortly. We know these work as we had them in our old apartment. Glad that I found them.. Anonymous. Wed Aug 31 2022

This is a casement window locking handle with a design that enhances grip to the frame and improves the seal against dust and air infiltration. The diecast construction has a baked enamel white finish. It is a face mounted style with threaded holes for rear mounting.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

This operator crank handle is constructed of diecast zinc and comes in a baked-on enamel finish, engineered to resist rust and corrosion. It is designed for use on Truth brand casement and awning window operators with 11/32 inch spindles. This window crank features a set screw at the base of the handle allowing it to lock onto the spindle, and a swivel knob at the tip for ease of operation. The reach on this crank measures 2-9/16 inch and it has a 3-1/2 inch projection. This operator crank handle is easy to install, and it’s used by a variety of window manufacturers.

This Truth Hardware Casement Window Sash Lock by Prime-Line Products is constructed of diecast zinc and comes in a white-painted finish. It is a left-handed lock and it features a low profile design to remain in-line with the thickness of the window's sidestop trim. The mounting holes are spaced apart at 2-3/8 inches, on center, and it comes complete with its keeper and installation fasteners. When the lever is activated, the locking cam engages the keeper, drawing the window tightly closed against the weather stripping. These locks have a stepped underside and are easy to install.

This Truth Hardware Casement Window Sash Lock by Prime-Line Products is constructed of diecast zinc and comes in a white-painted finish. It is a right-handed lock and it features a low profile design to remain in-line with the thickness of the window's sidestop trim. The mounting holes are spaced apart at 2-3/8 inches, on center, and it comes complete with its keeper and installation fasteners. When the lever is activated, the locking cam engages the keeper, drawing the window tightly closed against the weather stripping. These locks have a stepped underside and are easy to install.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

Anonymous. Sun Jul 16 2023

These Truth Hardware Sash Locks by Prime-Line Products are constructed of high pressure, corrosive resistant, diecast zinc and they come in a white baked-enamel finish. A concealed locking mechanism pulls rails together helping to reduce air infiltration. The mounting holes are spaced apart evenly, and they feature backset holes. The alignment lugs prevent side shift of the sash, and the slim-line design for narrow rail application With a lower profile it allows maximum sash opening. These locks are easy to install and used by many.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

Prime-line part F 2915 is a window sash lock for use on single-hung and double-hung vertical sliding windows. This item includes a sash lock, keeper, fasteners, and easy-to-follow installation instructions. These locks are constructed of diecast and fit atrium windows. The locks and keepers are coated with a corrosion-resistant, long-lasting painted finish. Prime-line sash locks like these are used nationwide, but they are typically found in homes and apartments in North Carolina and Texas. Sash locks like these are used by many to replace damaged or missing locks and install them easily with a simple Phillips head screwdriver.

This nesting operator crank handle and cover are designed for use on Truth Entrygard casement and awning window operators with 11/32 inch spindles. The crank handle is constructed of diecast zinc and it comes in a white enamel finish. Engineered to resist rust and corrosion. The operator cover is constructed of molded plastic, and it features a sleek nestling design to cuddle the folding crank resulting in a 1-3/4 inch low-profile projection. This style of cover and folding crank surpasses others where obstruction of window coverings is an issue, This operator cover also conceals the operator hardware. The window crank features a set screw at the base of the handle allowing it to lock onto the spindle, and a swivel knob at the tip for ease of operation. Overall reach on this crank extends out 4-1/8 inch when in use, and both the operator crank handle and cover are easy to install.

This is a Truth Hardware low-profile casement window sash lock that offers a low profile design. It only requires a 5/8 in. stop thickness, and comes in a white painted diecast zinc construction. The mounting holes are 2 in. on center. When the lever is turned, the locking cam engages the keeper, drawing the window tightly closed against the weather stripping making it a tighter and better seal.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

Just what we needed for my son’s windows!. Samantha. Erlanger, KY. Thu Aug 18 2022

This Truth Hardware Casement Window Sash Lock by Prime-Line Products is constructed of diecast zinc and comes in a white-painted finish. It is non-handed lock that can be used on both left and right-handed casement windows, and it features a low profile design to remain in-line with the thickness of the window's sidestop trim. The mounting holes are spaced apart at 2-3/8 inches, on center, and it comes complete with a pair of keepers and installation fasteners. When the lever is activated, the locking cam engages the keeper, drawing the window tightly closed against the weather stripping. These locks have a stepped underside and are easy to install.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

First Watch Security's range of patio and window locks is suitable to provide your home with additional security and give you peace of mind when you are away. Some patio doors can be lifted off their track - our anti-lift devices aid to prevent this.

Worked great to secure storm door.. Bonita. Mon Apr 13 2026

Prime-Line part F 2921 is a window sash lock for use on single-hung and double-hung vertical sliding windows. This item includes a sash lock, keeper, fasteners and easy-to-follow installation instructions. These white painted locks are constructed of diecast and fit windows manufactured by Simonton Windows. The locks and keepers are coated with a corrosion-resistant, long-lasting painted finish. Prime-Line sash locks like these are used nationwide, but they are typically found in homes and apartments in California. Sash locks like these are used by many to replace damaged or missing locks and install easily with a simple Phillips head screwdriver.

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

This Prime-Line H 3863 Right-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for right-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of white diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures 9-1/2 inch from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

This is a white flush mounted handle and latch set used by many patio door manufacturers. It has a steel hook latch with 1 inch standard spacing. This handle set will fit a minimum door thickness of 15/16 inch and up to a maximum thickness of 1-1/8 inch. It is 5-11/16 inch long and 7/8 inch wide with 5-1/8 inch mounting holes. Made of diecast metal, the handles fit flush into the screen door frame with an inside automatic locking feature.

was easy to install.. Gerald. Sacramento, CA. Sat Jun 28 2025

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

This is an extruded aluminum sliding doorkeeper. It is surface mounted for hook-style latches. The dimensions are 2-1/2 in. in length, with a 1-1/2 in. width. It is used by Viking doors.

This sliding closet door bottom guide is constructed of plastic and comes white in color. Each bottom guide mounts with 2 fasteners and they are designed to accommodate 1-3/8 in. bypassing closet doors. This pack supplies 2 pairs of by-passing doors, or one 3-panel door system. The mounting holes of these floor guides are spaced apart at 4-3/16 in. from center to center, and they feature 1-1/8 in. tall supports. These bypassing sliding closet door bottom guides are easy to install and are used by a variety of closet door manufacturers.

Hi This is a good design for bi-fold doors with good spacing between doors. Ed. FL. Sun Jun 09 2024

This is a right-handed Dyad casement operator with a white finish. The actuating arm is jointed with a clip on the end that catches onto the stud bracket that fits onto the sash. Hardened steel arms, worm drive and gears are protected with a corrosive resistant finish. The mounting holes are a blind tap meaning that the screws thread through the window frame and into the back of the operator housing.

This is a right-handed diecast casement locking handle with an offset base found on many contemporary casement windows (as viewed for the inside looking out). The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge by 13/16 inch from the tip of the lock to the center of the mounting holes. This handle has mounting holes for the handle assembly and the keeper at 1-1/2 inch apart.

Prime-Line part F 2926 contains a pair of spring-loaded Tilt Latches and easy-to-follow installation instructions. These tilt latches install on single- and double-hung vertical sliding, tilt-in vinyl sash panels. Vertical sliding windows with tilt-in sash allow for easier cleaning of hard-to-reach exterior glass surfaces.Each latch is constructed of durable .373 plastic and they are equipped with corrosion-resistant, long-lasting steel springs. These latches keep each vertical sliding panel locked into their respective paths of travel. Simultaneous disengaged latches allow the sash to tilt inward for thorough cleaning, or tilted in then rotated clockwise or counter-clockwise for easy removal of the sash from window frame.Prime-Line tilt latches like these are used in North Carolina and other states. Each package includes one right-hand and one left-hand latch. These latches are used by many to replace damaged or missing tilt latches and they are easy to install.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a retaining ring to add strength at the insertion point when the lock is engaged. These patio door pin locks are designed to secure the sliding door in place when in a closed or ventilating position. These lock pins include all installation fasteners and they are simple to install.

This is a reversible, anti-lift window and door lock. It securely locks your window or door in palace to allow both ventilation and also helps preventing the window or patio door from being lifted out of the track. Each is constructed from extruded aluminum and then the body is painted white. They are easy to put in place and secure with the included thumb screw. Order yours today.

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Thu Jul 17 2025

Square window.

Look great.. Anthony Gray. FL. Sun Jul 26 2026

The Prime-Line Cam Action Window Lock replaces or upgrades the sash lock on single and double hung vinyl windows. This small window latch is constructed from diecast and comes in a beautiful finish. Mounting hardware included. A Phillips head screwdriver is required for installation. The window latch replacement features a cam action hook which draws the brass sash lock keeper tight when locked. The body of the prime-line window latch has anti-jimmy studs which engage the keeper of the window lock replacement. For further dimensional information, please see the line drawing.

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Wed Feb 01 2023

This Defender Security Bar Door Lock is a security locking device for hinged swing-in doors, allowing a door to be slightly opened to allow safe viewing and ventilation. This door lock bar can also be installed out of reach of children so they cannot open the door by themselves, providing additional child-safe door security. Adding security bar locks for doors is quick and easy. All installation fasteners, including plastic shim spacers for leveling, are included. Strong, durable, and sure to last, these lock bars are constructed of zinc diecast with a classic bronze finish. This lock bar is 3-7/8 inch bar length by 2-1/2 inch height and has a long, hinged bar, which folds over the closed door to engage the catch. For further dimensional information, please see the line drawing.

They were perfect for our door. We bought a Kwikset deadbolt and lever set in venetian bronze and the color matched with this perfectly. Very satisfied. Haoran. Santee, CA. Tue Apr 05 2022

Prime-line part F 2912 is a window sash lock for use on single-hung and double-hung vertical sliding windows. This item includes a sash lock, keeper, fasteners, and easy-to-follow installation instructions. These white-painted locks are constructed of diecast and fit windows manufactured by crystal windows. The locks and keepers are coated with a corrosion-resistant, long-lasting painted finish. Prime-line sash locks like these are used nationwide, but they are typically found in homes and apartments in new york and Pennsylvania. Sash locks like these are used by many to replace damaged or missing locks and install them easily with a simple Phillips head screwdriver.

This white finish patio door handle is a surface with hook latch style. Often found on older patio doors, it mounts on the door's inside frame and the hook latch catches the keeper mounted on the jamb.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

This Prime-Line H 3864 Left-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for left-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of white diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures 9-1/2 inch from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

Give Your Cat the Freedom It Deserves:This aluminum cat door for window gives pets an easy way to come and go—no drilling or tools required. The adjustable panel fits most window sizes, and the clear flap lets curious cats peek outside. Simple to install and built to last, it's a thoughtful upgrade for you and your feline friend.

Works great! My cat absolutely loves it and took to it in a day. We both appreciate that she doesn’t need my help any more getting out, as raising the window was a hassle. The ability to lock it so she can only come in makes it easy to set a time when we don’t want her to go back out while still letting her come in of her own volition. Also great that we’ll be getting fewer mosquitoes in the house. I wish there was more padding included since the knobs for extending the panels make it so that the bottom is not flush with my window. Bought some foam strips that should do the job.. Thelo. Texas. Sat May 02 2026

Surface-mounted closer is fully rust and weather resistant making it suitable for exterior use. A single torsion spring is ideal for swinging screen doors and pool gates up to 57 lbs. (26kg) with an adjustable closing speed. Neat, compact, and durable white-painted housing is made of diecast zinc. Reversible handing. Do not overtighten, turning past 4 hole positions will cause this item to fail.

This patio sliding screen door grille is constructed of aluminum and comes in a white painted finish. The grille is designed to install on the exterior side of 48 in. Wide sliding screen doors to provide child safety, and protect the screen fabric from pet damage. This screen door grille measures 26 in. Tall, and with the fasteners and installation instructions provided it is simple to install. This maintenance-free grille is constructed of superior quality using close weave aluminum mesh supported by strong, extruded aluminum frame material in an attractive styling.

High quality screen door grill. Had to trim mounting tabs on one side to allow the screen to fit into the frame recess.. Edward. Meadow Vista, CA. Mon Jun 23 2025

This sliding patio door handle set is constructed from durable diecast material with a white finish. It features a comfortable inside pull with a strong steel latch and an offset outside pull for easy operation. The set includes a keeper and a unique double hook lock for added security. Designed for non–keyed use, this handle set offers a simple yet reliable replacement option. Note: Mortise lock is sold separately.

The black added foam , does mark up the white handle requiring cleaning , otherwise works well , great buy. Dolores. Tecumseh, ON. Sun Mar 15 2026

These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a retaining ring to add strength at the insertion point when the lock is engaged. These patio door pin locks are designed to secure the sliding door in place when in a closed or ventilating position. These lock pins include all installation fasteners and they are simple to install.

This is a sliding window lock that is keyed and securely locks window in closed or ventilating position. Securely locks window in closed or ventilating position.

This Prime-Line Adjustable Sliding Door Lock features a telescopic design that allows it to adjust to fit nearly all standard patio door openings. The lock bar is adjustable to accommodate openings from 28 inch to 48 inch Secure your door in an open position, so you can safely allow fresh air into your home. When not in use, simply swing the metal security bar up and out of the way. Unlike typical patio door patio door lock bar, this door lock stick does not require you to cut the unit down to size with a saw. You simply press in the tension release clip to extend the length or reduce the length. Constructed of aluminum with an aluminum finish, the patio safety bar prevents doors from being forced open. Please refer to the line art drawing for dimensions and compare to your needs before purchasing.

Perfect for securing my sliding glass door. Glad I found it.. Carolyn. Louisville, KY. Sat Feb 21 2026