The FULL40 is a full-motion articulating TV wall mount for screens from 26" to 60". The arm extends 10 inches out from the wall, swivels 90° in both directions, and tilts 20° downward — enough to mount the TV high and still angle it toward the viewer from across the room. VESA compatibility spans 75×75mm to 400×400mm, covering virtually every mounting pattern on the market. Carbon steel construction with electrostatic epoxy anti-corrosion coating.
`<b>What makes the FULL40 stand out in this size class?</b>`
One feature most buyers overlook: the VESA minimum. Most full-motion mounts in this category start at VESA 200×200mm. The FULL40 starts at 75×75mm — and goes all the way to 400×400mm. That means it covers standard large-screen patterns (400×400, 300×300, 200×200) alongside the smaller, less common patterns found on older panels, specialty displays, or non-standard configurations. If you've ever had a mount arrive and discovered it didn't fit — the FULL40's range is why that doesn't happen here.
`<b>Does the FULL40 handle the weight of a 50", 55", or 60" TV?</b>`
The FULL40 holds up to 66.1 lbs (30 kg). A typical 50" TV weighs 30–45 lbs — well within spec. A 55" TV typically weighs 35–50 lbs — also within spec. A 60" TV can weigh up to 60–65 lbs; most fall under 66.1 lbs, but heavier models can approach the limit. Before mounting a 60" panel, check the TV's weight in its spec sheet or on the manufacturer's site. For 55" and under, the FULL40 covers the full weight range of all standard consumer TVs in this size.
`<b>What does "full motion" mean in practice for a living room TV?</b>`
The arm extends 10 inches (26.1cm) out from the wall, swivels 90° left or right, and tilts 20° downward or 5° upward. When not in use, it folds back to 2.80 inches from the wall. In a living room, this means: pull the TV out for a movie and push it back when not watching; swing it toward the dining area when cooking; tilt it 20° down if mounted above a console or fireplace. The 20° downward tilt is particularly useful for large-screen installations — a 55" or 60" TV mounted high on the wall needs to angle toward the viewer, not face straight out. A fixed mount provides none of these adjustments after installation.
`<b>How do I know if my TV is compatible?</b>`
Check two things: screen size and VESA pattern. The FULL40 fits TVs from 26" to 60" and supports VESA patterns from 75×75mm to 400×400mm — including 75×75, 100×100, 200×100, 200×200, 300×200, 300×300, 400×200, and 400×400mm. Also check the TV's weight: the mount holds up to 66.1 lbs (30 kg). Your TV's VESA pattern is printed in the owner's manual or on a label on the back panel. Most 55" and 60" TVs use VESA 400×400mm or 300×300mm — both supported.
`<b>What walls can it mount to, and what's in the box?</b>`
The FULL40 installs on wood studs, brick walls, and concrete surfaces. The mount ships pre-assembled — no assembly required. The box includes complete hardware kits for both wall and TV installation, a built-in bubble level for alignment, and a cable organizer. All screws, bolts, and spacers for a standard installation are included.
Built by ELG, specializing in AV and ergonomic mounting solutions since 2002. Products available in 30+ countries.
Ordered 2. Both were easy to install. Just as described.. Gina. Nyc, NY. Wed Apr 01 2026
