78 In Tandem Wardrobe Door Roller Assembly Rear 2 Pack Primeline N 6503

The K9 Kennel Boss collapsible dog crate is thoughtfully engineered to keep your dog safe and contained. With lightweight aluminum construction, commercial-grade hardware, and a quality powder-coated finish, this strong and durable design helps prevent dog escapes and is easy to clean. The sleek collapsible design easily transitions from fully assembled to suitcase configuration in under a minute with no additional tools required. Built-in handles allow for easy transporting or storing of the crate when not in use.

Very sturdy crate, nicely built & high quality. Ordered & arrived in less than one week.. Laura. US. Thu, 08 Oct 2026

This is a side mounted, top hung wardrobe roller assembly with a tandem 7/8 inch convex nylon wheel for the front sliding wardrobe door. The stamped steel bracket assembly is adjustable and has an 1/4 inch offset. It is fitted onto the wardrobe front door and fits 3/4 inch to 1-3/8 inch thick doors. Used by Acme and Stanley door systems, as well as a variety of other wardrobe door manufacturers. For the back wardrobe door roller assembly use Prime-Line part N 6503.

This Closet Door Roller assembly is constructed from nylon. It features an adjustable top mount steel bracket that also acts as a corner bracket for steel frame bypassing doors. This style roller fits on Acme and similar styled doors.

Anonymous. Wed, 01 Nov 2023

This sliding patio door roller assembly is constructed from stainless steel. It features a 1-1/2 In. ball bearing roller. This type of patio door roller has an adjustable stainless steel housing assembly.

This 1-1/4 inch F-tab tandem roller assembly is designed for Guaranteed Products and a variety of other sliding patio doors. It features two concave steel ball bearing rollers in an adjustable stamped steel housing for smooth, quiet operation. The F-tab mounting allows the corner screw to pass through, capturing the assembly between the side stile and bottom rail as the screw draws the components together for a secure fit. The housing measures 11/16 inch wide with a 13/16 inch flare, 1-1/4 inch tall, and 3-1/8 inches long. Rear adjustment allows precise alignment, making this assembly ideal for DIY homeowners and contractors.

The Industrial Strength Z Rack with Add-On Hanging Rail and Built-in Height Adjustment is a versatile and durable storage solution for your clothing and accessories. With 2 x 62.5" extra wide hanging bars and 87.79" height, this heavy duty clothes rack is designed to provide ample space for hanging various items, making it ideal for both home and commercial use. The height of our clothing rack is adjustable in three gears from 75.08" to 81.88" to 87.79", provides extra height for Add-On Hanging Rail to added convenience and organization, making it perfect for retail stores, boutiques, or even in your own home.

This is a sturdy, easy to assemble rack the will function perfectly in a showroom or in my case a loft space.. John. Toms River, NJ. Sun, 14 Jun 2026

This is a sliding window roller assembly with a plastic housing and flat edged tandem brass rollers. It features brass axles with a low profile housing and a snap-in design.

Replace or repair worn or broken sliding door rollers with this 1-1/4 inch unique back tandem roller assembly, designed for Milgard and a variety of other vinyl patio doors. It features two concave steel ball bearing rollers in a durable stamped steel housing with rear adjustment for precise alignment. The housing measures 3/4 inch wide, 1 inch tall, and 3-1/8 inches long, with a threaded mounting hole on the back and an optional threaded hole on top for versatile installation. Perfect for DIY homeowners or contractors, this assembly restores smooth, quiet sliding performance. A Phillips head screwdriver is required for installation.

This is an F-tab patio door roller assembly with a 1-1/4 inch concave nylon ball bearing roller. When the corner screw passes through the F-tab the assembly is then captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 inch wide and 1-3/16 inch tall with a 7/8 inch dimple width. Used by Lupton and a variety of other sliding patio door manufacturers.

Roller fit properly for my application...arrived quickly as well.. David. Regina, SK. Tue, 24 Dec 2019

This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller used by Trimview and a variety of patio door manufacturers. It's diecast plain back housing is 11/16 in. wide, 1 in. tall and 2-5/8 in. long. The adjustment screw is in the back end. There is a 1/4-20 threaded mounting hole in the back end.

This 1-1/4 inch B-tab tandem roller assembly is designed for Louisiana-Pacific and a variety of other sliding patio doors. It features two concave (or grooved) steel ball bearing rollers in an adjustable stamped steel housing for smooth, quiet operation. The housing measures 11/16 inch wide, 1-1/16 inch tall, with a 13/16 inch flare. The B-tab secures the assembly as the mounting screw is driven through the B-tab hole into the door’s bottom rail, providing a stable, reliable fit. Rear adjustment allows precise alignment, making this assembly ideal for DIY homeowners and contractors restoring sliding door performance.

The Prime-Line N 6847 pocket door roller assembly is compatible with a variety of bypass, bi-fold, and pocket closet doors, offering smooth and quiet operation for your sliding door needs. This roller assembly features a top-hung, center-mounted tricycle design with 3/4 inch flat rollers, ensuring seamless and long-lasting door movement. Built with a steel bracket and durable plastic rollers, this pocket door assembly provides reliable strength and quiet functionality for heavy-duty applications. The threaded rod easily installs into the bracket at the top of the door, making this closet door assembly quick and simple to set up with basic tools. Designed for 1-3/8 inch thick doors and tracks with a 1-1/8 inch inside width. For further dimensional information, please see the line drawing and compare it with your original item before purchasing.

Worked well to fix our pocket door. Pam. Belleville, ON. Wed, 18 Nov 2020

This is a set of handed, top mounted wardrobe door roller assemblies that have an adjustable height feature. They are left and right assemblies with a 7/8 inch convex nylon roller that hang in a track mounted above. They also work as corner brackets holding the sides and the top rail together. Used by Acme and Stanley door systems.

This is a sliding glass door roller assembly. It has a 1-1/4 inch outside diameter. Features a steel ball bearing roller with an adjustable diecast housing.

This 1-1/8 inch C-tab tandem roller assembly is designed for Window Master sliding patio doors. It features two concave steel ball bearing rollers in an adjustable stamped steel housing for smooth, quiet operation. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together, providing a secure fit. The housing measures 9/16 inch wide with a 3/4 inch dimple width, 1-1/8 inch tall, and 3 inches long. Rear adjustment allows precise alignment, making it ideal for DIY homeowners and contractors. A Phillips head screwdriver is required for installation.

This is a plain back patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 5/8 in. wide, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end. It is used by Capitol and a variety of other manufacturers of patio doors.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This insert style sliding screen door assembly has a high density polyethylene housing with a high density polyethylene roller insert. It is used on the Academy Uni-Fit screen doors. The roller is a 1 Inch steel ball bearing roller and is used on the top or the bottom of the door. Easy to install, by inserting into the open U-shaped frame and inserting the screw. For steel ball bearing see Prime-Line part B 624. Order yours today and have your door slide like new.

This is a stamped steel bracket with a flat edge brass roller. Used on International windows.

This wardrobe door roller is constructed from nylon and comes affixed to a steel bracket. It features an adjustable, top hung, side mounting design. This roller fits Harvey and similar styled by-pass doors that are 3/4 to 1-3/8 inch thick.