716 In Center Grooved Nylon Wheel Sliding Window Roller 2 Pack Primeline G 3192

This slim tower tucks into the smallest of bathroom spaces, keeping toilet paper and cleaning supplies out of view but within reach. The attractive wooden panel adds a touch of warmth and style to the space while the tiered shelving offers ample space for all bathroom accessories and products to fit comfortably.

Great product! Arrives assembled, small enough to fit anywhere, and pretty cute.. Casey. Brooklyn, NY. Thu Jun 04 2026

This is a white plastic housing with a concave steel roller. It features a two different height adjustment. Used by Alenco window.

This is a sliding window roller assembly with a flat edge wheel. This flat edge sliding window roller is constructed from nylon. It comes affixed to nylon housing. This style roller fits on guaranteed products and similar styled sliding windows.

This nylon-constructed guide bracket houses a 5/16 in. Flat-edged brass roller. The nylon housing holds this roller into the bottom of your rail. Used on Elco/Century windows. Easy to install with a few simple tools in a few minutes. Installation of this roller will make the slide action of your window improve. A Phillip's head screwdriver is required for installation.

This is a sliding window roller assembly made of extruded aluminum bracket with a flat edge steel ball bearing roller. These brackets are used on international imperial series 1200 windows and a variety of other window manufacturers.

This is a sliding window roller. White plastic housing, with a flat edge plastic roller. Top rollers adjust up to provide anti-lift protection. Bottom rollers adjust up and down for alignment. Used on Hilite 200 series windows.

This is a window roller, flat edge, sliding, suitable for use with Adore Hilite sliding windows. This flat nylon constructed roller is used on adore highlight sliding windows. Nylon axle pins also act as a side guide. Installs two per window.

This is a sliding window in a black plastic housing with a flat-edged stainless steel ball-bearing roller. Features a stainless steel roller insert carrier.

This is a 7/16 in. white plastic housing with steel roller. It features a center-grooved roller. Typically used by Krestmark.

Worked perfectly for our window. Nancy. US. Sat May 30 2026

This is a black plastic housing sliding window roller assembly. It features a flat-edged plastic wheel with a 3/4 in. outside diameter, with stainless steel ball bearings.

This flat edge sliding window roller is constructed from nylon. It comes affixed to a nylon housing. This style roller fits on Guaranteed Products and other similar styled sliding windows.

This sliding window roller assembly is constructed from nylon. It is attached to nylon housing and has flat edge tandem rollers. This style roller is used by a variety of window manufacturers.

This is a combination of a 1-1/8 in. diameter steel concave or grooved ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole, and a combination of 5 different axle choices. Depending on the situation, you can choose to rivet the roller into place or use a roll pin, drive pin, binder post and screw or bolt and nut. Regardless of how you need to install the new roller into your existing roller housing, in most cases, one of the five choices will work.

This flat-edged sliding window roller is constructed from steel. It comes affixed to nylon housing. This style roller is used on acorn series 2100 thru series 2300, new style windows.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. These sliding screen door roller assemblies are constructed of stamped aluminum and include nylon wheels. The wheels feature concave (grooved) edges and have a 1 Inch diameter. Roller assemblies like these are used on sliding screen doors manufactured by Columbia doors, and many others. Order yours today and have your door slide like new.

Perfect fit and quick delivery:). Bernard. Ruidoso, NM. Fri Aug 15 2025

These horizontal sliding window roller assemblies are designed with flat-edged brass wheels housed in durable white plastic frames. Each assembly features a tandem roller design with strong steel axles, ensuring smooth and long-lasting operation for sliding window panels. The minimum mortise pocket size required is 3/8 inch wide x 3/8 inch deep x 1-5/16 inch long. Commonly used by a variety of window manufacturers, these rollers are an ideal replacement option for damaged or missing assemblies, helping restore effortless sliding functionality to your windows.

This 1/2 inch steel roller comes secured in a nylon constructed housing. These rollers install two per track and help keep your windows energy efficient. Used on Superlite series 8000 windows.

This is a sliding window white plastic housing. It is center grooved tandem brass rollers. Used on Merzon windows. Features a 2 position height adjustment housing can snap apart for single glazed, or left as tandem for dual glazed windows.

This is a sliding glass door roller assembly. It has a 1-1/4 inch outside diameter. Features a steel ball bearing roller with an adjustable diecast housing.

This is a white plastic housing window assembly. It features flat edge tandem brass rollers with 3/8 in. outside diameter and built-in side guides.

This is a white plastic housing with concave tandem steel rollers. Used by a.b.c. Windows. A dual wheel upgrade to the prime-line part g-3038 improves glide and window performance.

The Prime-Line N 7536 sliding closet door roller kit ensures effortless movement for your closet doors, providing a seamless sliding experience with durable, top-quality components. This closet door roller kit includes both front and back roller assemblies, offering easy bypass of your sliding doors to ensure a perfect alignment. Built to last, the sliding closet roller kit features sturdy stamped steel brackets and roller wheels, ensuring reliable performance and long-term durability. Designed for straightforward installation, this roller guide kit comes with all necessary hardware, making it simple to replace or upgrade your sliding closet door kit with minimal tools required. The Prime-Line sliding closet door guide kit is compatible with most standard closet doors. For further dimensional information, please see the line drawing provided

These roller assemblies are constructed of stamped steel housings and steel wheels. The housing features flared corners for better gripping power when inserted into the bottom rails of the sliding sash. The wheels feature concave (grooved) edges and are designed to glide over raised tracks. Roller assemblies like these are commonly used in showcase windows and display cabinets that are equipped with sliding glass or wood panels.

Product provided an exact replacement for my 70 year old windows. Should last longer than the nylon rollers included with the windows. Jeff. Pittsburgh Pa Metro. Tue Sep 09 2025

This is a sliding window roller assembly used as a bottom roller on heavy sliding glass windows, with an adjustable steel housing and plastic ball-bearing center grooved roller.

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. It is a "K" tab patio door roller assembly with a 1-1/4 in. concave or grooved nylon ball bearing roller. The "K" tab style back end is a T shaped tab that is simply slid up into a similar T shaped receptacle in the bottom of the patio door. No screws are required. The housing is 5/8 in. wide and 1-3/16 in. tall with a flare and 3/4 in. dimple width. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Installation easy to install with a few simple tools. Refer to dimensional line drawing to match product specifications. This style roller is used on International and similar styled patio doors.

Did the trick and saved me 400 for a new door. Thanks Wayfair!. Rickto. Toronto. Sat Apr 17 2021

This is a C-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The housing is 9/16 in. wide and 1-3/8 in. tall with a 3/4 in. dimple width. Used on Window Master patio doors. It replaces the original K-tab style that is no longer available.

This is a side mounted, top hung wardrobe roller assembly with a tandem 7/8 inch convex nylon wheel for the front sliding wardrobe door. The stamped steel bracket assembly is adjustable and has an 1/4 inch offset. It is fitted onto the wardrobe front door and fits 3/4 inch to 1-3/8 inch thick doors. Used by Acme and Stanley door systems, as well as a variety of other wardrobe door manufacturers. For the back wardrobe door roller assembly use Prime-Line part N 6503.

This is a unique one of a kind trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two existing screws in the door. Purchase the Prime-Line part D 1548 for the steel roller version.

Had a sliding door that was hard to open.... These rollers worked perfectly! The sliding door now works like a charm. Perfect!!. Beverly B. Orange County, CA. Mon Feb 24 2025

This is a steel window roller with solid, nylon constructed, axle pins for use on aluminium frames. Fluid movement allows windows to open gracefully.

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Installation easy to install with a few simple tools. This style roller is used on Door Master and similar styled patio doors. Refer to dimensional line drawing to match product specifications.

This is a unique back patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller. The stamped steel housing is 11/16 in. wide and 1-3/8 in. tall. It is rear adjusting with a set of tabs or ears that insert into slots in the door's bottom rail. No mounting screws required. It is used by Premiere patio doors.

This is an F-tab patio door roller assembly with a 1 inch concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is then captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 inch wide and 1-3/16 inch tall with a 7/8 inch dimple width. Used by Lupton and a variety of other sliding patio door manufacturers.

Upgrade your sliding doors with this back mount tandem roller assembly, designed for Andersen wood patio doors and compatible with many other wood door brands. Two 1-1/4 inch concave steel ball bearing rollers ensure smooth, quiet operation, while the stamped steel housing with side adjustment makes precise alignment simple. Top insert points and side locking tabs secure the assembly for long-lasting performance. Perfect for DIY homeowners or contractors, this durable roller assembly restores effortless sliding and improves door longevity. Installation is easy with a standard Phillips head screwdriver.

Anonymous. US. Sat Apr 12 2025

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door corner roller assembly is constructed of stamped steel and it includes a steel ball bearing roller attached to one end. The roller features a concave (grooved edge), and it is fully adjustable. This corner assembly is used by Metal Industries patio door manufacturer, and a variety of others. It measures 1 Inch in diameter and it is 9/32 Inch thick. The corner fits into the sliding screen door frame and holds the horizontal rails together with the vertical side stiles. Order yours today and have your door slide like new.

Replace or repair broken or missing sliding door rollers with this Prime-Line D 1998 Steel Sliding Door Roller Assembly. The stamped steel patio door rollers replacement is adjustable. This door roller assembly is used by a variety of metal framed sliding patio door manufacturers. Made of stamped steel housing with a yellow finish, these sliding door rollers are strong, durable, and built to last. The housing of the sliding door rollers replacement is 11/16 inches wide by 1-11/16 inches deep and 2-3/4 inches long. The concave ball bearing steel roller is 1-1/2 inch. A Phillips head screwdriver is required for installation. Use the screw in the front of the housing to adjust ride height. For further roller assembly sliding door dimensional information, please see the line drawing.

This is a white plastic housing with flat edge tandem aluminum rollers. They have a 9/32in. the outside diameter and fits Horizon windows.

This is a white nylon housing roller assembly with flat edge tandem plastic rollers. Typically these are found on Milgard windows and can be used on a variety of other window manufacturers if the dimensions are compatible.

This Closet Door Roller is constructed from nylon. It comes affixed to a steel housing and features a mortise style installation.

This was eas to inst and was a gam changer. Rodney. Baltimore, MD. Thu Aug 06 2026

These roller assemblies are constructed of a stamped steel housing and feature a plastic, center grooved (concave) edge wheel. These types of roller assemblies are typically used on wood sliding windows and panels, and require a mortised installation. These roller assemblies fit Glide Master, and they are used by a variety of other manufacturers.

This is a sliding window roller assembly with a plastic housing and flat edged tandem brass rollers. It features brass axles with a low profile housing and a snap-in design.

This roller is constructed from steel. It comes affixed to an adjustable steel housing with an 1-1/4 in. diameter roller. Used by a variety of glass door manufacturers.

Restore smooth, effortless operation to your sliding patio door with this Tandem Stainless Steel Roller Assembly. Designed with a unique bottom-mount housing, this roller assembly is commonly used on Andersen sliding patio doors and many other wood patio door brands. It is an ideal choice for homeowners and DIY installers seeking a durable replacement solution. The assembly includes two 1-1/2 inch concave stainless steel ball bearing rollers housed in a corrosion-resistant stainless steel frame. This construction provides strength, durability, and long-lasting performance, especially in coastal or high-humidity environments where rust and corrosion are common issues. The stainless steel housing measures 11/16 inch wide, 1-3/16 inches tall, and 4-5/8 inches long, with a mounting tab at each end for secure installation. It is designed to fit into a mortised pocket in the bottom rail of the door. For added convenience, the roller assembly features a side adjustment mechanism, allowing you to fine-tune the door height and alignment with a standard screwdriver. Whether you are repairing an Andersen sliding door or replacing worn rollers on another wood patio door, this stainless steel roller assembly provides a reliable and long-lasting solution to keep your door gliding smoothly. Please refer to the line art drawing for exact dimensions to ensure compatibility before purchasing, as this is not a universal part.

This is a C-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. As the C-tab is positioned around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 9/16 in. wide and 1-3/8 in. tall with a 3/4 in. dimple width. Used on Window Master patio doors. It replaces the original K-tab style that is no longer available.

This 1-1/2 inch C-tab tandem roller assembly is designed for Pacific, Elco, and a variety of other sliding patio doors. It features 1-1/8 inch concave stainless steel ball bearing rollers in an adjustable stamped stainless steel housing for smooth, quiet operation. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together, ensuring a secure installation. The housing measures 11/16 inch wide with a 13/16 inch flare, 1-1/16 inch tall, and 3-1/8 inch long. Rear adjustment allows precise alignment, and mounting hardware is included. A Phillips head screwdriver is required for installation.

This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide, 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and a #10-32 threaded optional use hole on the top. It is used by Daryl, Lenahan, Patio Magic and a variety of other manufacturers of sliding patio doors.

This 13/16 inch nylon constructed roller is used for monorail drawer track systems. Easily mounts to the right side of your drawer when viewed from the rear. Includes 2 rollers with necessary mounting screws.

Upgrade your sliding patio doors with this 1-1/2 inch stainless steel tandem roller assembly, compatible with a variety of metal or vinyl framed doors. The plain back stamped stainless steel housing contains in-line tandem concave stainless steel ball bearing rollers, delivering smooth, quiet operation and long-lasting durability. Rear adjustment allows precise alignment during installation, and a 1/4-20 threaded mounting hole on the back (with optional #10-32 threaded hole on top) ensures a secure fit. Built to resist corrosion, this roller assembly performs reliably in severe weather conditions. Ideal for DIY homeowners or contractors, installation requires only a Phillips head screwdriver.