6 In Slip Joint Pliers Unbranded Thd20150749

This Westbrass fully finished 1-1/4 inch OD tubular tailpiece is 12 inch long. It is used to extend lavatory drains in fully finished, exposed installations by replacing the short tailpiece provided with many drains today. For a cleaner, joint free look. 17 ga. Brass construction. Available in a variety of stylish finishes, this item is sure to complement your existing fixtures. Westbrass Fine Decorative Plumbing since 1935.

very good quality, wasn't able to get at normal home improvement stores. Craig. Aztec, NM. Mon Apr 05 2021

When it comes to quality, PROFLO is uncompromising—treating value and performance as equals. Craftsmanship and style work hand-in-hand to deliver the best possible product. From rough products to finished fixtures, PROFLO products are developed with both presentation and performance in mind.

Westbrass 1-1/4 inch diameter, 12-Inch Slip Joint Extension Tube. Use to extend the length of a drain to the P-Trap or waste tube to the wall. Slip joint nut and rubber washer included, 100 PSI maximum working pressure, 150-degree maximum working temperature. Solid Brass construction. Available Sizes: 8", 12" & 16" (1-1/2 in or 1-1/4 inch OD). Available in a variety of stylish finishes, this item is sure to complement your existing fixtures. Westbrass Fine Decorative Plumbing since 1935.

Just what I needed to make the renovation in our bathroom look even better. Renu. Raleigh, NC. Wed Oct 28 2020

Keep your bathroom plumbing running smoothly and looking sharp with our premium 1-1/2" brass bathroom sink P-trap kit with 8" slip joint extension tube. Expertly crafted from high-quality brass, this P-trap kit not only ensures superior durability but also delivers a polished, sophisticated look ideal for any bathroom aesthetic. Designed for universal compatibility, the 1-1/2" standard connection seamlessly integrates into most bathroom sink setups, making installation quick, effortless, and hassle-free. The included 8" slip joint extension tube provides added flexibility, helping you easily reach existing plumbing fixtures or adjust for perfect alignment in challenging installation spaces. Say goodbye to leaks and unpleasant odors. Available in a variety of stylish finishes, this item is sure to complement your existing fixtures. Complete the look with other Westbrass coordinating plumbing fixtures. Westbrass Fine Decorative Plumbing since 1935.

For a pipe it’s a thing of beauty! Didn’t actually need to get this brass color as it’s hidden in the cabinet so was a little overkill, but if you have an exposed p-trap, this is just lovely looking.. Karen. Montgomery, TX. Sun Jan 11 2026

Keep your bathroom plumbing running smoothly and looking sharp with our premium 1-1/4" brass bathroom sink P-trap kit with 8" slip joint extension tube. Expertly crafted from high-quality brass, this P-trap kit not only ensures superior durability but also delivers a polished, sophisticated look ideal for any bathroom aesthetic. Designed for universal compatibility, the 1-1/4" standard connection seamlessly integrates into most bathroom sink setups, making installation quick, effortless, and hassle-free. The included 8" slip joint extension tube provides added flexibility, helping you easily reach existing plumbing fixtures or adjust for perfect alignment in challenging installation spaces. Say goodbye to leaks and unpleasant odors. Available in a variety of stylish finishes, this item is sure to complement your existing fixtures. Complete the look with other Westbrass coordinating plumbing fixtures. Westbrass Fine Decorative Plumbing since 1935.

This piping is perfect for the open standing vanity.. Tracey. Hampton, VA. Mon Mar 02 2026

This 1-1/2” x 12” tailpiece will serve to create a consistent finished look under your sink, by connecting the strainer to the P-trap. Available in many color matching finishes.

A perfect fit and the could matched.. Rosemarie. New Orleans, LA. Sun Jul 26 2026

Keep your bathroom plumbing running smoothly and looking sharp with our premium 1-1/2" brass bathroom sink P-trap kit with 12" slip joint extension tube. Expertly crafted from high-quality brass, this P-trap kit not only ensures superior durability but also delivers a polished, sophisticated look ideal for any bathroom aesthetic. Designed for universal compatibility, the 1-1/2" standard connection seamlessly integrates into most bathroom sink setups, making installation quick, effortless, and hassle-free. The included 12" slip joint extension tube provides added flexibility, helping you easily reach existing plumbing fixtures or adjust for perfect alignment in challenging installation spaces. Say goodbye to leaks and unpleasant odors. Available in a variety of stylish finishes, this item is sure to complement your existing fixtures. Complete the look with other Westbrass coordinating plumbing fixtures. Westbrass Fine Decorative Plumbing since 1935.

After my plumbers told me the previous p-traps were too small, these 1.5 in. p-traps were just right for my remodel. I cannot wait to take pictures of the install! Thank you Wayfair you make purchasing incredibly easy and the customer service is like none other!! I’m a raving fan of Wayfair-thank you!. Kate. Atlanta. Fri Aug 08 2025

Keep your bathroom plumbing running smoothly and looking sharp with our premium 1-1/4" brass bathroom sink P-trap kit with 12" slip joint extension tube. Expertly crafted from high-quality brass, this P-trap kit not only ensures superior durability but also delivers a polished, sophisticated look ideal for any bathroom aesthetic. Designed for universal compatibility, the 1-1/4" standard connection seamlessly integrates into most bathroom sink setups, making installation quick, effortless, and hassle-free. The included 12" slip joint extension tube provides added flexibility, helping you easily reach existing plumbing fixtures or adjust for perfect alignment in challenging installation spaces. Say goodbye to leaks and unpleasant odors. Available in a variety of stylish finishes, this item is sure to complement your existing fixtures. Complete the look with other Westbrass coordinating plumbing fixtures. Westbrass Fine Decorative Plumbing since 1935.

I ordered the oil rubbed bronze P-Trap to match existing fixtures. I have a vessel sink sitting on a darkly stained wooden base. Having the matching P-Trap was important for the look of this small room. I am glad I was able to find the system I needed.. Anonymous. Thu Nov 13 2025

This 1-1/2” x 12” tailpiece will serve to create a consistent finished look under your sink, by connecting the strainer to the P-trap. Available in many color matching finishes.

Lynn. Fort Myers, FL. Mon Jun 22 2026

Constructed from the highest quality of solid brass, slip joint brass Extension tub guarantees you peak performance and long-lasting use. Combining designer modern style with top-grade professional standards, this slip joint brass extension tube will bring functionality back into your home.

Fits perfectly. Bernarda. Wellington, FL. Thu Apr 16 2026

The SUPPLYGIANT 4 Inch PVC DWV P-Trap w/ Solvent Weld Joint H x H is built from durable white PVC to provide long-lasting performance in drain, waste, and vent systems. Its solvent weld joint ensures a strong, leak-resistant connection, while the P-trap design creates a reliable water seal to block sewer gases and maintain smooth drainage. Perfect for both residential and commercial plumbing installations.

This 1-1/2” x 12” tailpiece will serve to create a consistent finished look under your sink, by connecting the strainer to the P-trap. Available in many color matching finishes.

I had a hard time finding this piece locally, but this was available to me with quick shipping and a great price so I jumped on it. It came exactly as described and is the perfect piece for our floating granite sink.. Timothy. Arroyo Grande, CA. Tue Jul 07 2026

Kingston Brass P-Traps are perfect in homes with exposed plumbing as they come in a variety of premium finishes to match any of your existing bathroom fixtures. These are used to provide a liquid seal between the home and sewer gasses to prevent any contamination from entering.

The joint tailpiece look amazing with our utility sink in our bathroom. The piece is very sturdy.. Sandra. Claremont, CA. Sat Jun 07 2025

The SUPPLYGIANT 6 Inch PVC DWV 2-Piece Combination Wye & 1/8 Bend 45° Elbow Hub – White PVC Drain, Waste & Vent Fitting is built from strong, corrosion-resistant PVC for lasting performance. Designed for non-pressurized DWV systems, it combines a wye and 45° elbow into one fitting to ensure smooth flow and efficient directional change. Hub ends provide secure, leak-resistant solvent-welded connections, making it a dependable choice for residential, commercial, and industrial plumbing.

Available in a variety of popular finishes like brushed brass and polished chrome, this slip joint brass extension tube offers you everything you would ever need in one product. Constructed from the highest quality of solid brass, the slip joint brass extension tub guarantees you peak performance and long-lasting use. Combining designer modern style with top-grade professional standards, this slip joint brass extension tube will slip joint brass extension to bring functionality back into your home.

Made the vanity look clean and finished!. Leighann. Decatur, AL. Mon Jun 15 2026

Ayna’s metal P-trap is a modern and contemporary design made fully from brass. This low-profile p trap provides a compact solution for drain applications. The vanity p-trap kit has a polished finish that is resistant to rust and corrosion. Ayna’s standard p-trap for bathroom sinks is expertly crafted and has leak-free durability for lifetime usage. This sink drain is an integral part of modern plumbing design. The p-trap’s brass pipe has a sturdy construction, durability, and reliability. Ayna’s antique finished brass p-trap has all the parts needed to install including the flange, nut, and extension tube. This enhances the appearance of open vanities.

The Highcraft Waste Arm Slip Joint is designed to enhance your kitchen sink setup. With a 1-1/2" x 15" diameter. Constructed from high-quality polypropylene(PP) plastic, leak-proof seal and reliable performance. Perfect for residential or commercial use, it provides effortless installation and efficient drainage for tubular drain systems

Westbrass 1-1/2 inch diameter, 16 inch double end slip joint extension tube. Use to extend length of a drain to P-Trap or waste tube to wall. Slip joint nut and rubber washer included, 100 PSI maximum working pressure, 150 degree maximum working temperature. Solid Brass construction. Available in a variety of stylish finishes, this item is sure to complement your existing fixtures. Westbrass Fine Decorative Plumbing since 1935.

In updating the vanity and sink the pipes are now exposed. The normal silver/chrome pipes detracted from the new theme. So we got this pipe to bridge the gap between the sink and trap. Perfect! We are also going to spray paint the new hoses and cut off valves to match. Love it!. Traci. Memphis, TN. Tue Feb 14 2023

The SUPPLYGIANT 6" PVC DWV 1/8 Bend 45° Elbow (Hub x Hub) is designed for smooth directional changes in drain, waste, and vent systems. Made from high-quality, corrosion-resistant PVC, this fitting ensures long-lasting performance while reducing the risk of clogs. Perfect for residential or commercial use, it meets ASTM and NSF standards for safety and quality.

The 6" PVC DWV 1/8 Bend 45° Street Elbow offers a smooth directional change for drain, waste, and vent systems. Constructed from durable, corrosion-resistant PVC, this fitting features a hub connection on one end and a spigot end on the other for flexible installation. The 45° angle promotes efficient water flow while reducing clog potential. Certified to ASTM and NSF standards, it ensures reliable performance in residential or commercial plumbing applications.

The SUPPLYGIANT 1-1/2 Inch PVC DWV P-Trap w/ Solvent Weld Joint H x H is built from durable white PVC to provide long-lasting performance in drain, waste, and vent systems. Its solvent weld joint ensures a strong, leak-resistant connection, while the P-trap design creates a reliable water seal to block sewer gases and maintain smooth drainage. Perfect for both residential and commercial plumbing installations.

The Highcraft Plastic Branch Tailpiece is designed to enhance your kitchen sink setup. With a 1-1/2" diameter and an 8" length, it includes a 1/2" branch for direct connection. Constructed from high-quality white plastic, this tailpiece offers a durable, leak-proof seal and reliable performance. Perfect for residential or commercial use, it provides effortless installation and efficient drainage for tubular drain systems.

The SUPPLYGIANT 6 Inch PVC DWV Double Wye Hub – White PVC Drain, Waste & Vent Fitting is designed for smooth, efficient flow in non-pressurized DWV systems. Its double wye design connects two branch lines to the main run, simplifying layouts and minimizing the need for additional fittings. Constructed from strong, corrosion-resistant white PVC, this fitting provides durability and long-lasting performance for residential, commercial, and industrial plumbing applications. Easy to install with solvent-weld hub connections, it ensures a secure and leak-resistant fit in drain, waste, and vent systems.

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom—and every room in between—your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your individual style, we’ll make every step of the process as seamless and worry-free as possible. We stand by our quality. That’s our promise to you.

Install very easy. Raymond. Palm City, FL. Mon Mar 16 2026

The SUPPLYGIANT 6 Inch PVC DWV Wye Hub – White PVC Drain, Waste & Vent Fitting is engineered for reliable plumbing performance. Designed for non-pressurized drain, waste, and vent (DWV) systems, this durable fitting splits the main line into two branch connections, helping to maintain smooth water flow and reduce clogging. Made from strong, corrosion-resistant white PVC, it ensures long-lasting use in residential, commercial, and industrial applications.

The Highcraft Plastic Branch Tailpiece is designed to enhance your kitchen sink setup. With a 1-1/2" diameter and an 8" length, it includes a 1/2"/3/4 branch for direct connection. Constructed from high-quality white plastic, this tailpiece offers a durable, leak-proof seal and reliable performance. Perfect for residential or commercial use, it provides effortless installation and efficient drainage for tubular drain systems.

The SUPPLYGIANT 6" PVC DWV Cleanout Tee with C.O. Plug provides reliable access for inspection and maintenance in drain, waste, and vent systems. Made from durable white PVC, it features a Hub x Hub x Female Pipe Thread (FPT) connection and a removable plug for easy cleaning. Perfect for non-pressurized DWV applications, ensuring smooth flow and lasting performance.

This Westbrass Classic Pedestal Lavatory Kit with 5/8 inch (1/2 inch copper compression) round, lever handle angle stops for easy operation, 3/8 inch x 20-inch bullnose annealed copper risers, and 1-1/2 inch x 1-1/2 or 1-1/4 inch P-Trap with and matching high-box flange, is perfect for dressing up an exposed or console style sink. The angle stops fit 1/2 inch copper pipe (5/8 inch nominal). Available in a variety of stylish finishes, this item is sure to complement your existing fixtures. Westbrass Fine Decorative Plumbing since 1935.

These parts are very hard to come by. I ordered in matte black. Very pleased with quality; however plumber was a little careless when affixing so some of the paint did scuff off but easily touched up with paint. The product arrived flawless. I ordered a P trap to complete the look. The white P-trap is temporary.. Anonymous. US. Mon Sep 02 2024

The SUPPLYGIANT 6 Inch PVC DWV Repair Coupling is designed for quick, reliable repairs in drain, waste, and vent systems. Its hub x hub connection fits standard 6 inch PVC DWV pipes for easy slip-fit installation with solvent cement. Made from durable, NSF-certified virgin PVC, this fitting resists corrosion, cracking, and chemical damage for long-lasting use. ASTM & NSF certified DWV fittings meet ASTM D2665, D1784, D3311, and F1498 standards, ensuring dependable performance in non-pressurized, gravity-flow applications for both residential and commercial plumbing.

Great finish.. Sara. Oklahoma City, OK. Sun Mar 29 2026

The SUPPLYGIANT 6" x 6" x 4" PVC DWV Sanitary Tee Reducing Hub is a high-quality white PVC DWV waste and vent fitting designed for non-pressurized systems. Featuring a durable, corrosion-resistant construction, it ensures smooth water flow and reliable performance in residential or commercial drainage installations.

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom—and every room in between—your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your individual style, we’ll make every step of the process as seamless and worry-free as possible. We stand by our quality, value customer service, and ensure your satisfaction. That’s our promise to you.

Perfect for my exposed sink! Matched perfectly with my signature hardware faucet. Would buy again! Quality excellent. Natalie. Montgomery, TX. Tue Jun 30 2026

The SUPPLYGIANT 3 Inch PVC DWV Wye Street S x H x H – White PVC Drain, Waste & Vent Fitting is built from strong, corrosion-resistant white PVC for dependable performance in DWV systems. Its Wye Street design allows smooth directional changes in non-pressurized drain, waste, and vent applications. Featuring a Hub x Hub x Spigot (S x H x H) configuration, this fitting ensures secure solvent-weld connections for a leak-resistant installation in residential, commercial, or industrial plumbing setups.

The Highcraft Plastic Center Waste Outlet with Baffle Tee is designed for 1-1/2" kitchen sink drains. Measuring length, this center outlet features a slip joint connection for easy installation. The built-in baffle tee ensures efficient waste flow and a secure, leak-proof seal. Made from durable white plastic, it provides reliable performance and is suitable for both residential and commercial tubular drain applications

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom—and every room in between—your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your style, we’ll make every step of the process as seamless and worry-free as possible. We stand by our quality, value customer service, and ensure your satisfaction. That’s our promise to you.

have not installed yet but it looks nice and good quality.. Laila. Wed Oct 15 2025

This completed a long sought after look for our bathroom, it fit perfectly and Wayfair delivered quickly.. Studio Theatre Inc Debra. Washington, Dc. Mon Oct 02 2023

The Highcraft Plastic Extension Tube is designed to enhance your kitchen sink setup. With a 1-1/2" x 6" diameter. Constructed from high-quality polypropylene(PP) plastic, leak-proof seal and reliable performance. Perfect for residential or commercial use, it provides effortless installation and efficient drainage for tubular drain systems

Provides all your bathroom essentials, a shiny new lavatory trap makes even a basic component a restorative addition for your bathroom.

The SUPPLYGIANT 6" PVC DWV Sanitary Tee Hub is a high-quality white PVC DWV waste and vent fitting designed for non-pressurized systems. Featuring a durable, corrosion-resistant construction, it ensures smooth water flow and reliable performance in residential or commercial drainage installations.

Prevent overflow of water from the sink with this Houzer Overflow Assembly. This overflow drain is made from high-quality material that keeps it durable and strong for years to come. The overflow drain features a silver finish that looks elegant and matches with a variety of home decors. This sturdy and sleek overflow drain is a useful addition to any sink. The user-friendly design of this overflow drain makes it easy to use and install.

Wayfair was the only place to find this particular drain on short notice. I tried finding it at three well known plumbing shops in Chicago, a city that has a reputation for inventing modern plumbing, and no one had it.. Edward. Chicago, IL. Sun Dec 25 2022

The 4" PVC DWV 1/8 Bend 45° Street Elbow offers a smooth directional change for drain, waste, and vent systems. Constructed from durable, corrosion-resistant PVC, this fitting features a hub connection on one end and a spigot end on the other for flexible installation. The 45° angle promotes efficient water flow while reducing clog potential. Certified to ASTM and NSF standards, it ensures reliable performance in residential or commercial plumbing applications.

Rather than replacing your entire toilet, consider replacing 1 part for a quick and easy fix. Purchase to replace your toilet lid and your toilet will look brand new again.

Umbrella drain with overflow. Update your bathroom with an advanced pop-up drain assembly with overflow. Made to fit 1.5-inch sink drain holes on bathroom sinks with overflows. This fixture brings a fresh new look to your sink coordinating to your desired hardware. Snug fit is ensured by a rubber seal ring on each side. Designed for use with sinks that have an overflow..

Love this easy to use drain stop!. Mm. OK. Mon Jun 29 2026

When it comes to quality, PROFLO is uncompromising—treating value and performance as equals. Craftsmanship and style work hand-in-hand to deliver the best possible product. From rough products to finished fixtures, PROFLO products are developed with both presentation and performance in mind.

Works great to hide p-trap under custom made powder sink. Did not use the supply covers.. Cynthia. Wed May 06 2026

These single offset bath supplies are constructed of high-quality brass to ensure reliability and durability. Its premier finish resists tarnishing and corrosion.

My husband and I are building a new home and we are refurbishing an antique claw foot tub. We are painting it black on the outside and white on the inside, so these black fixtures will be perfect!!. Rebecca. Ponchatoula, LA. Thu Apr 30 2026

Since 1873, Kohler has been a trusted name in the kitchen and bath industry. Insist on KOHLER® quality. This 1/2" NPT angle supply features a four-arm handle stop.

Just love Kohlers finish and design, amazing.. Stavros. ON. Sat Aug 12 2023

The modern styling of the BPT01 bottle trap from LUXIER creates a streamlined look of contemporary elegance. Available in Brushed Nickel, Brushed Gold, Chrome, Matte Black, and Rubbed Bronze, this designer trap complements a variety of bathroom settings. This bottle trap has a brass body construction and a stainless steel extension tube for durability and long-lasting use. You can buy with confidence, knowing that LUXIER backs its products.

Served the purpose for 1/4 the cost of a boutique plumbing store.. Joanne. Markham, ON. Wed Jun 24 2026