6 In New Construction Ic Recessed Shallow Housing 6 Pack Envirolite Evrh5000sicat6

These versatile mounting plates make installing recessed LED lights easier for both new construction and retrofit projects in homes and businesses. Constructed from sturdy metal with a galvanized finish, they have a slim 0.6mm profile that is lightweight yet strong, rust‑resistant, and built to last. With six precision‑cut hole sizes (2", 3", 4", 5", 6"), they fit most recessed light housings, including wafer lights, gimbal LEDs, and low‑profile fixtures with junction boxes. The symmetrical center hole ensures accurate alignment for a clean finish, while pre‑cut notches and mounting points simplify installation—just position, secure, and use the plate as a template to cut drywall. Ideal for kitchens, living rooms, basements, garages, and saunas, these plates provide a reliable, cost‑effective foundation for your lighting needs.

These new construction mounting plates are universally compatible with 2–6 inch recessed light fixtures and serve as an all-in-one installation solution for new construction and remodeling projects. Crafted from premium cast iron, they feature strong corrosion resistance, high structural rigidity and long-lasting durability; each plate is fitted with pre-scored easy-cut opening rings for quick trimming to match fixture sizes, and the long slotted mounting tracks seamlessly fit all common ceiling framing systems including wood joists and metal studs. Their ultra-slim flat design fits into narrow ceiling cavities and can also serve directly as a drywall cutting template to streamline the construction process.

Universal Design: This new-construction flat mounting plate with a symmetric round opening is engineered to deliver a stable, versatile solution for a wide range of ceiling configurations. The reserved round hole allows precise matching with different LED light sizes, ensuring accurate and secure installation.

Good quality product. I needed to mount over 100 recessed lights for my new construction project and these worked great. Would highly recommend. Neil. Thu Jul 30 2026

The fire rated new construction recessed can is ETL Certified, Complies with UL 1598 UL 263/ASTM E119 for a 2-hours Fire Test Rating, and CAN/ULC S101. Airtight (Per ASTM-E283), It can well isolate the indoor temperature from the outdoor temperature to avoid cold air or warm air from leaking out of the house to avoid affecting the air conditioning effect. It is thermally protected, surrounded by insulation materials and can be well moisture-proof, to protect the safety of electricity. This 6 inch recessed light can also comes with TP24 quick connector, it's easier for you to install the retrofit lighting.It can be perfectly applied in different types of structural layouts.Ideal for both residential and commercial new construction projects.

These heavy-duty mounting plates streamline installing 8", 9", and 11" recessed LED lights for both new construction and retrofit projects in homes and businesses. Constructed from sturdy metal with a galvanized, corrosion-resistant finish, they have a slim, lightweight profile that is exceptionally rigid, rust-proof, and built to last. The adjustable track and alignment notches ensure precise positioning with different structural layouts, while the symmetrical center hole guarantees a flush, professional finish. Pre-cut mounting points and a dedicated junction box area enable fast, tool-friendly installation—simply secure the plate, position your fixture, and use the integrated template to cut drywall. Ideal for electricians, contractors, for kitchens, living rooms, basements, garages, and saunas, creating a stable foundation that minimizes air leakage into ceiling plenums.

This 4-inch recessed lighting trim features a square profile with a step baffle design in a modern white and black finish. Ideal for residential or commercial applications, it enhances lighting performance by reducing glare and improving light dispersion. Designed for use with PAR housings (sold separately), this fixed down-light trim ensures consistent and efficient illumination.

The fire rated new construction recessed can is ETL Certified, Complies with UL 1598 UL 263/ASTM E119 for a 2-hours Fire Test Rating, and CAN/ULC S101. Airtight (Per ASTM-E283), It can well isolate the indoor temperature from the outdoor temperature to avoid cold air or warm air from leaking out of the house to avoid affecting the air conditioning effect. It is thermally protected, surrounded by insulation materials and can be well moisture-proof, to protect the safety of electricity. This 6 inch recessed light can also comes with TP24 quick connector, it's easier for you to install the retrofit lighting.It can be perfectly applied in different types of structural layouts.Ideal for both residential and commercial new construction projects.

Universal Design: This new-construction flat mounting plate with a symmetric round opening is engineered to deliver a stable, versatile solution for a wide range of ceiling configurations. The reserved round hole allows precise matching with different LED light sizes, ensuring accurate and secure installation.

Great quality product. Worked very well to mount my 4” recessed lighting. Would recommend!. Neil. Thu Jul 30 2026

Universal Design: This new-construction flat mounting plate with a symmetric round opening is engineered to deliver a stable, versatile solution for a wide range of ceiling configurations. The reserved round hole allows precise matching with different LED light sizes, ensuring accurate and secure installation.

Works like it should. Metal could be a little more rigid but it does what it needs to.. Anonymous. Tue Oct 27 2026

Aether is a next-level downlight, with an extreme-low profile that is designed to fit in tight plenum spaces without compromising lumen output or glare control. Choose from round or square, trim or trimless, and an array of finishes. With features such as vertical and horizontal adjustment. Aether is suitable for a wide range of applications including residential, commercial, hospitality, and architectural.

They are designed with double-wall construction and non-combustible fiber insulation to prevent the passage of flames, toxic gasses, and ignition gasses into plenum ceilings. The fiber insulation also acts as sound deadening material, minimizing the transfer of sounds between floors. The EFH6 is suitable for condominiums, apartment buildings, multi-family, commercial and residential applications.

As advertised and worked great for a remodel.. Andrea. Gunnison, CO. Wed Feb 05 2025

This light is a 4-inch recessed step baffle trim designed to enhance lighting performance while maintaining a clean and modern look. Featuring a white flange with a black baffle interior, this trim reduces glare and eye strain while improving light dispersion. Built for compatibility with 4" housings (sold separately), it offers vertical adjustability and full rotation, making it a versatile choice for residential or commercial recessed lighting applications.

This 6 in. Sloped Ceiling IC Recessed Housing with Quick Link Connector has several great installation features plus an Air-Tight rating. It is ideal for IC and non-IC new construction applications. Its gasketed Air-Tight housing restricts airflow from conditioned spaces into unconditioned attic space, preventing unnecessary HVAC costs and improving the overall home energy efficiency. The housing and frame are constructed from die-formed corrosion resistant galvanized steel. An aluminum enclosure box ensures proper heat dissipation, allowing this fixture to be used in contact with insulation. The lamp housing compartment can be adjusted to fit ceiling thicknesses from in. to 1 in. The socket position can be adjusted to accommodate ceiling pitches from 2/12 to 7/12 pitch. It features a universal J-box with snap-out sides. Wiring is made easy with the included wiring quick-connects that allow simple installation of 12-20 AWG wire without using separate wire nuts - simply strip supply wires and push in. The housing has pre-installed nails on the adjustable hanger bars which are easily installed in regular lumber, engineered lumber, and laminated beams. Hanger bars include t-bar mounting clamps for use in suspended t-grid ceilings. The bar hangers have a maximum span of 24 in. and are scored in two locations for fast, clean breaking, allowing housing installation in very narrow joist spacings. It is UL and CUL listed for damp locations and is thermally protected against improper use of lamps.

This 4-inch square gimbal recessed trim offers a clean, minimalist design with practical adjustability. Finished in satin copper, it adds a subtle warm metallic touch while maintaining a straightforward aesthetic. The trim allows vertical adjustment from 0 to 15 degrees, enabling precise directional lighting to highlight specific areas or objects. Constructed from durable stamped metal, it features rear re-lamping for easy bulb replacement. Designed to fit standard 4-inch recessed housings (sold separately), this trim is ideal for both residential and commercial lighting applications.

The fire rated new construction recessed can is ETL Certified, Complies with UL 1598 UL 263/ASTM E119 for a 2-hours Fire Test Rating, and CAN/ULC S101. Airtight (Per ASTM-E283), It can well isolate the indoor temperature from the outdoor temperature to avoid cold air or warm air from leaking out of the house to avoid affecting the air conditioning effect. It is thermally protected, surrounded by insulation materials and can be well moisture-proof, to protect the safety of electricity. This 6 inch recessed light can also comes with TP24 quick connector, it's easier for you to install the retrofit lighting.It can be perfectly applied in different types of structural layouts.Ideal for both residential and commercial new construction projects.

Designed for sleek functionality, this 4-inch square gimbal trim delivers flexible directional lighting in a minimal black finish. The vertically adjustable gimbal (0° to 30°) allows you to aim the light precisely where needed, making it ideal for highlighting features or focused task lighting. Constructed from durable stamped metal, it supports rear re-lamping and fits standard 4-inch housings (sold separately). This trim is a smart, subtle choice for both residential and commercial recessed lighting setups.

This new construction mounting plate with a symmetric round hole is a universal, robust solution engineered for versatile ceiling configurations. Supporting 2.13", 2.95", 3.74", 4.33", 5.2"and 6.3" LED recessed lights, it features adjustable tracks, alignment notches, and universal mounting holes for precise positioning across diverse structural layouts. Designed for quick installation—simply adjust, fasten with screws/nails, remove the size-specific template, and secure the junction box—it’s ideal for new construction, remodeling, and both residential and commercial lighting projects, ensuring lasting performance and clean aesthetics.

Very useful for new construction recessed light installation. New lights don't have housing and these plates are very helpful.. Vasyl. NY. Thu Apr 23 2026

Luxrite New Construction Mounting Plate fits 2 Inch, 3 Inch, and 4 Inch LED recessed lighting kits and is the perfect choice for new construction homes or house remodeling. Great when paired with ultra thin or slim recessed lights with junction box. Each mounting plate comes with 2 hanger bars which can extend from 13.75 inches to 25.88 inches and a plate that can slide along the bars from end to end. Made of durable metal and so you can be sure that your recessed lighting is secure. Model #: LR41001

These galvanized steel mounting plates are designed specifically for 4-inch LED recessed lights, making them ideal for new construction, remodeling, and post-drywall projects in both homes and businesses. Their lightweight 0.6mm profile and rust-resistant galvanized finish provide a sturdy, long-lasting base for wafer lights, gimbal LEDs, and standard recessed fixtures. The pre-cut 4.25-inch symmetrical center hole ensures a precise fit, while alignment notches and mounting points simplify installation and save time. Suitable for living rooms, kitchens, basements, garages, and more, these plates are a reliable choice for electricians, contractors.

Great product, for the hard working man , arrived sooner than expected and in budget. Will purchase again today .. Phil. Providence, RI. Fri Jun 12 2026

Universal Design: This new type of flat-packed fixed panel for buildings features symmetrical circular holes, aiming to provide a reliable and flexible solution for various ceiling layouts.

Good value does what it does and is cheaper than hardwae stores. Anonymous. Thu May 28 2026

Builder Essential 5in 850 Lumens Round LED Recessed Light and Housing for Remodel or New Construction with 0-90 Degree Adjustable Trim 5-CCT 2700-3000-3500-4000-5000K in White (Pack of 6) IC-Rated

This new construction mounting plate with a symmetric round hole is a universal, robust solution engineered for versatile ceiling configurations. Supporting 2.13", 2.95", 3.74", 4.33", 5.2"and 6.3" LED recessed lights, it features adjustable tracks, alignment notches, and universal mounting holes for precise positioning across diverse structural layouts. Designed for quick installation—simply adjust, fasten with screws/nails, remove the size-specific template, and secure the junction box—it’s ideal for new construction, remodeling, and both residential and commercial lighting projects, ensuring lasting performance and clean aesthetics.

Universal Design: This new type of building flat panel is equipped with symmetrical circular holes, aiming to provide a reliable and flexible solution for various ceiling layouts.

This 4.25-inch single-hole LED mounting plate is custom-engineered for standard 4.25-inch recessed LED lights, ensuring a snug, seamless fit without trimming or adjustments. Crafted from high-quality galvanized steel, it’s lightweight yet sturdy, rust-resistant, and maintenance-free, effectively reducing air flow into the ceiling plenum. Featuring a pre-centered symmetric hole for perfect alignment and pre-designed notches/holes for easy installation, it’s ideal for new construction, basement remodeling, and various indoor spaces like living rooms, kitchens, offices, and commercial buildings.

Absolutely loved it! Great quality, fast shipping, and friendly service. Highly recommend! Great value. Philip. Thu Oct 08 2026

These galvanized steel mounting plates are designed specifically for 4-inch LED recessed lights, making them ideal for new construction, remodeling, and post-drywall projects in both homes and businesses. Their lightweight 0.6mm profile and rust-resistant galvanized finish provide a sturdy, long-lasting base for wafer lights, gimbal LEDs, and standard recessed fixtures. The pre-cut 4.25-inch symmetrical center hole ensures a precise fit, while alignment notches and mounting points simplify installation and save time. Suitable for living rooms, kitchens, basements, garages, and more, these plates are a reliable choice for electricians, contractors.

The R0NC-2 is a frame-in plate designed specifically for use with Eurofase MiniLite fixtures during new construction installations in non-insulated ceilings. This plate supports a hanger bar mounting system, ensuring secure and precise positioning of the fixture housing. The plate requires verification of hole size based on the intended MiniLite model, providing flexibility and ease of installation for contractors and electricians. Durable and compliant with CETLUS standards, it is a reliable accessory for professional lighting installations.

The 608-SH/408-SH IC type shallow can housings is designed for both ceiling joists installations and drop ceiling (with T-bar grid) installations. It can be completely covered by thermal insulation. Also, the fixture may direct contact with any combustible material like ceiling joist or floor board safely. The 608-SH/408-SH is a Title 24 compliant, no screw based socket or other mediumbased incandescent socket adapters are needed.Tihs new construction housing compatible with MW 6 inch retrofit downlight with smooth trim (SKU:LZMJ1023) and MW 6 inch retrofit downlight with baffle trim（SKU:LZMJ1041）

Bruce. Terre Haute, IN. Tue Nov 14 2023

Volta is the quintessential high-performance LED architectural recessed downlight. Volta Recessed Housing can be specified with one of three (15W, 25W, 36W) serviceable drivers to plan your project in accordance with energy and lighting requirements up to 3,000 Lumens. Volta trims include a LED light engine with a replaceable high powered LED module. Tool less in field adjustable glare control and optic system can be used for louvers, lens and beam control.