5 Gal T13 8 Matrix Matte Interior Paint Primer Behr Marquee 145005

The Armor AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The Armor AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a low gloss wet-look finish. The Armor AR350 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

very happy with the price for the product was kept well inform about were was the product at certain time and it was well package. Richard. Brampton, ON. Fri Jul 24 2026

The Armor SX5000 WB is a PRO-Grade water-based penetrating water-repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 WB is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

I’ve got a fairly long and steep concrete driveway that is starting to show its age a little bit. There has been some minor cracking from the freeze-thaw cycle each winter. I decided to try the Armour SX5000 water-based sealant to see if it would improve the situation. I have delayed writing this review for a bit as I wanted to driveway to go through at least one winter season. I first pressure washed the entire driveway surface which is pretty time consuming. I then applied the Armour sealant with a manual pump sprayer. This part went fairly quickly. The trick is to get the sealant covering the driveway well, but not so much as to create puddles that aren’t absorbed. I made sure there was no rain in the forecast for a couple of days. Initially, I did half of the driveway first and the first day that it rained the difference on the two sides was very noticeable. Water on the coated side was beading and running off and on the other side it was being absorbed into the concrete. My driveway has now gone through two winters and the sealant is still somewhat effective, but I think I will need to coat it again this fall.. Bryan. Halifax, NS. Fri Mar 27 2026

The Armor AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The Armor AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a low gloss wet-look finish. The Armor AR350 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption, including cracking, spalling, pitting, dusting, mold, mildew, and algae growth.

Good sealer for concrete driveway. Robert. Butte, MT. Thu Apr 02 2026

The Armor AX25 combines two great products into one! With the AX25, you get a penetrating water repellent sealer, and a high gloss acrylic coating - all packed into one amazing product!The Armor AX25 is a solvent-based siloxane-infused acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AX25 is a fantastic sealer if you are looking to bring out dull and faded surfaces, enhance surfaces with a high gloss wet look finish, and provide superior water repellency benefits to the surface. The Armor AX25 also doubles as a cure and seal and can be applied to new concrete.The Armor AX25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Bought AX-25 to reseal my pool deck and lanai. This stamped concrete deck has to be resealed every 2-3 years. Used tint from another company (very good stuff). However, I decide to give Foundation Armor a try for sealing. I am very pleased and find this to give a better appearance than the sealant I used before from the tint provider. Gloss seems much brighter and just seemed to go down easier. Of course it will a year or two before I know for sure, but so far it looks great.. Rosetejas. Se Texas. Wed Jul 12 2023

Regen 10 Inch Cooling Copper Infused Memory Foam Adult Mattress

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces, and enhance surfaces with a high gloss wet look finish.The Armor AR500 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Fantastic sealer. Anonymous. Thu Apr 16 2026

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor AR500 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Seals great and gives the surface a nice shine!. Bobbi. Evans City, PA. Mon Jun 15 2026

Enjoy precise water control with this rough-in valve. Designed for easy integration, it seamlessly blends into any bathroom design, bringing a touch of modern functionality. Experience a new level of showering thanks to its advanced valve technology.

Great functioning in wall piece that works well with our new Delta handle and rainfall shower head. (FYI—— you will need to purchase a cartridge to use with this. Not included). Kim. US. Sun Sep 06 2026

Practicality and beauty go hand in hand with this stylish gray toilet. The gray finish and contemporary design add a modern elegance that suits any home style. The quick-fill, soft-lid and water-saving design make it ideal for your home. Clean lines, seamless design and easy-to-remove base make cleaning easy.

This goes perfect, color and trim to our new restroom!. Anonymous. Sat May 23 2026

The Armor AG BROWN SEAL is a solvent-based acrylic sealer designed to enhance, seal, and protect exposed aggregate concrete surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss brown-tinted surface film. The Armor AG BROWN SEAL is a fantastic sealer if you are looking to bring out dull and faded exposed aggregate concrete, and enhance them with a brown-tinted high gloss wet look finish.The Armor AG BROWN SEAL is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Amazing coverage for our aggregate sidewalk. The sealer not only lives up to harsh winters here in the North, but is amazingly beautiful in the summer! This is the only product we will buy for our concrete need.. Johna. Pittsburgh, PA. Mon Sep 11 2023

The Armor WB15 is a water-based acrylic sealer designed to seal and protect concrete and paver surfaces with a durable low gloss surface film. The Armor WB15 is a fantastic sealer if you are looking to enhance surfaces with a low gloss finish.The Armor WB15 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

The folks at Foundation Armor were very helpful in helping us find a low gloss sealer for our stamped concrete. We applied 2 coats and it came out looking great.. Anonymous. Pembroke New Hampshire. Sat May 06 2023

The Armor SX5000 WB is a PRO-Grade water-based penetrating water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 WB is made from high quality, non-recycled, US manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Satisfactory. Hedley. Thomaston, ME. Mon Jul 27 2026

Volta is the quintessential high-performance LED architectural recessed downlight. Volta housings can be specified with one of three (15W, 25W, 36W) serviceable drivers to plan your project in accordance with energy and lighting requirements up to 3,000 lumens. Available in New Construction IC Rated Airtight or Remodel Non-IC Airtight with emergency backup battery and Chicago plenum safety options. Volta trims include a LED Light Engine with a replaceable high powered LED module and are available in a variety of options including round, square, adjustable, wall wash, shallow regressed, or a sleek flangeless trim which can be spackled directly up to the aperture. Tool-less in-field adjustable glare control and optic system can be used for louvers, lens, and beam control.

A one-step formula that cleans, shines and protects in a one-time and labor-saving step. This product is safe to use on Forbo Marmoleum products. It is also non-toxic, bio-degradable, and has no harsh chemicals.

This product imparts a greater gloss than Marmoleum has out of the box. I'd call it satin. We like the shine. Since it is a Forbo product it should be the most compatible treatment available. The instructions say it both cleans and shines though it makes sense to thoroughly sweep then clean the floor with mild detergent and water or the Forbo cleaner first. I avoid flooding the floor even though the click seal planks are supposed to be rated for kitchens and baths.. Dale. Port Townsend, WA. Tue Feb 03 2026

When it comes to quality, PROFLO is uncompromising—treating value and performance as equals. Craftsmanship and style work hand-in-hand to deliver the best possible product. From rough products to finished fixtures, PROFLO products are developed with both presentation and performance in mind.

Plug & play replacement for my broken water tank.. Wenjuan. Plano, TX. Sat Jun 21 2025

Volta is the quintessential high-performance LED architectural recessed downlight. Volta housings can be specified with one of three (15W, 25W, 36W) serviceable drivers to plan your project in accordance with energy and lighting requirements up to 3,000 lumens. Volta trims include a LED light engine with a replaceable high powered LED module. Tool less in field adjustable glare control and optic system can be used for louvers, lens and beam control.

The Armor AG BROWN SEAL is a solvent-based acrylic sealer designed to enhance, seal, and protect exposed aggregate concrete surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss brown-tinted surface film. The Armor AG BROWN SEAL is a fantastic sealer if you are looking to bring out dull and faded exposed aggregate concrete, and enhance them with a brown-tinted high gloss wet look finish.The Armor AG BROWN SEAL is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Excellent product. Used it to seal our curbing. Perfect color and added the wet look like it says. Anonymous. Thu Apr 30 2026

5" LED Recessed Lighting Kit built for steam environments, this high-quality, lightweight, aluminum recessed LED light will complement any steam shower design. With an impressive rough-in bracket.

Worked great for the limited space in the shower.. Mariana. Portland, OR. Thu Sep 23 2021

The Armor WL550 is a penetrating, matte wet look water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption. It will darken the surface to slightly enhance any dull and faded coloring. The Armor WL550 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and masonry. It works entirely below the surface and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Worked well and water beads on marble lanai and pool deck pavers. It is not matte but more of a low gloss that I expect to dull from the sun.. Mark. Sw Florida. Thu Mar 14 2024

The Armor SX5000 is a PRO-Grade solvent-based Silane Siloxane water-repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Great product for protecting concrete. Be careful with how you want to apply this product. I used a plastic container and sprayer, and this sealer literally melted the plastic/ spraying wand. I had to buy stailess steel sprayer to apply this sealer. Also, use a very good quality gloves to avoid any skin rash. It would be great if the supplier supplied MSDS sheet and warning label to not to use any plastic sprayer. Product is excellent, easy to apply! I hope it will keep my concrete in great condition for next 3-4 years.. Junaid. Edmonton, AB. Mon Sep 15 2025

The Armor WB25 is a water-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will protect the surface with a durable high gloss surface film. The Armor WB25 is a fantastic sealer if you are looking to enhance surfaces with a high gloss finish. The Armor WB25 also doubles as a cure and seal and can be applied to new concrete.The Armor WB25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Great product. Ron. Niagara Falls, NY. Sat Jan 21 2023

This works well with Mannington Audra Flex.. Kathryn. Xenia, OH. Mon Jun 08 2026

A surface mounted, fixed spotlight made from powder coated metal.

Transform your bathroom into a sanctuary of comfort, cleanliness, and innovation with our state-of-the-art smart toilet. Designed for those who demand the very best in hygiene, convenience, and style, this intelligent toilet redefines everyday luxury with cutting-edge features tailored to your lifestyle.

My second smart toilet and it might be better than the first one. I’ve gotten so spoiled at home, I find myself holding it until I get back. Highly recommend for the heated seat alone!. Faith. Charlotte, NC. Tue May 19 2026

This can be used to accentuate your walls and smoothen your tile edges.

Our NEW Starlike EVO grout is a Two-component, acid-resistant epoxy grout for laying and grouting all types of tiles and mosaics with joints 1mm (3/64) to 15 mm (19/32) in. width. World's leading high-performance and high-fashion grouting material. This Litokol Epoxy grout is extremely easy to install and maintain. Can also be used as an adhesive. We also offer several The Tile Doctor Shimmer / Glitter additives that you can add to any of our colors. Product with ultra-low volatile organic compound (VOC) emissions. When applying grout to the tile we recommend using The Tile Doctor Epoxy Float. This float is specially designed to spread grout into joints when grouting tile with epoxy-based grout.

Great color match for what I needed. Zarinah. Los Angeles, CA. Wed Jun 03 2026

This can be used to accentuate your walls and smoothen your tile edges.

Loctite PL Premium FAST GRAB Polyurethane Construction Adhesive is a revolutionary construction adhesive that's up to 8 times stronger than traditional adhesives. Loctite 8X PL is an all-purpose construction adhesive that provides superior results with a high initial tack for vertical surfaces to hold objects quickly with no bracing required. This versatile construction adhesive can be used for indoor and outdoor projects and is water proof for work in humid areas. The long-lasting formula can also be applied directly to wet, frozen, or treated lumber and will last as long as the surface it joints together. Loctite PL Premium FAST GRAB features an extended repositioning time and sets in 20 minutes and fully cures in 24 hours. Low VOC, less than 2 percent, by weight, Loctite PL Premium FAST GRAB has no strong solvent odors and is great for interior projects. It is VOC compliant for sale in all 50 states and meets and exceeds APA AFG-01 specs. Loctite PL Premium FAST GRAB Polyurethane Construction Adhesive bonds to most common construction materials such as wood, plywood, OSB, MDF, treated wood, hardwood flooring, concrete, stone, granite, marble, slate, masonry, brick, foam insulation of all sorts including expanded polystyrene foam, extruded polystyrene foam, and polysio or urethane foam, carpets, metal, stainless steel, galvanized metal, lead, cement-based products, fiber cement panels, ceramic, fiberglass, drywall, rigid and cellular vinyl/PVC trim and molding and polyash trim.

Justwhat I needed for my project. Denice. California. Wed Aug 05 2026

Introducing the newly redesigned Touch Digital Heat Controller (ATW-TDHC), offering a blend of innovation, convenience, and precise control. This state-of-the-art device is required to operate our five Italian-designed Heated Towel Rack collections and allows heat levels to be adjusted with 5 different heat settings. Can be rotated around the power connector for convenience or appearance. Compatible ONLY with the following collections: Sirio Quadro Vega Modello i Antus

The exact replacement that I needed. Joel. Aventura, FL. Thu Apr 06 2023

This item is for the new marble shaped in an eye-catching chair rail format. A perfect addition to any wall and made from natural materials.

M92X is a Modified Moisture-Cured Adhesive 4 Gallons that handles up to 90% RH, this Modified Moisture-Cured Adhesive 4 Gallons also helps with Crack Isolation and Sound Reduction. This Modified Moisture-Cured Adhesive 4 Gallons can be used on Mohawk Engineered Flooring for installation of glue-down flooring.

Just what I needed and arrived ahead schedule. Perfect for laying hardwood on a concrete slab. Moisture protection, sound dampening, and quick dry. Excellent product.. Charay. Clovis, CA. Mon Aug 13 2018

Featuring a soft white background with subtle dove gray veining, this honed pencil molding in Carrara White showcases classic natural marble in a smooth, refined finish. Measuring 0.75" x 0.75" x 12", this elegant detail brings a polished, professional touch to your tile project. Ideal for framing backsplashes, adding depth to wall tile layouts, or outlining shower niches, it also serves beautifully as a transitional trim between materials. Its timeless appeal complements both traditional and contemporary spaces with ease. For a cohesive and elevated look, pair it with coordinating marble mosaics or countertops.

Perfect for shower recess molding. Adds just the right touch. Marble is stunning and classy. Would order again.. Maureen. Bloomfield Hills, MI. Mon Jun 15 2026

The natural finish of this ceramic is perfect for use in bathrooms as well and it comes at a very affordable price tag, making it very practical, especially when there are several types available.

High-quality, durable marble liners are useful for creating a variety of finished products, including tiles and grout. It comes with a quarter-round marble edge. These are an excellent choice for adding that extra element of uniqueness to your decor.

General Finishes High Performance (HP) polyurethane is a unique finish that combines the best qualities of urethane and acrylic. This specialized blend makes it incredibly tough, durable, and water-resistant, making it ideal for high-wear surfaces like tables and cabinets. Unlike many water-based finishes, HP is formulated to resist common issues like foaming, sagging, and running. It also offers all the user-friendly benefits of a PolyAcrylic Blend, meaning it won't yellow and cleans up easily with water. Plus, it's enhanced with UV absorbers to protect the underlying stains, paints, and wood. HP is a fast-drying, low-odor, and non-flammable alternative to traditional lacquers, perfect for interior woodwork, furniture, and cabinets. With a quick 15-minute dry time and only 2-4 hours needed between coats, you can finish your projects quickly.

For mounting mouldings and millwork (as well as for joining mouldings), this Orac Decor DecoFix Pro is an extra-strong, slow-drying installation and filler that ensures a permanent bond between the mouldings and your walls and ceilings. Offered as a cartridge that is designed to fit into a standard caulking gun, this DecoFix Pro is intended for interior applications on porous surfaces, and is water-based, enabling excess amounts to be readily wiped off.

I purchased the adhesive to make sure my chair rail fastened to the wall. Fortunately, I didn't need to use much; however, the amount that I used was perfect and worked well.. Joanne. Plainfield, IL. Tue Aug 18 2026

Add texture and shine to your wall with this tile. This nature-inspired square wall panel is crafted in aluminum and features a texture reminiscent of alligator skin. The champagne finish combines with the bumpy faceted design causing your light to reflect around the room. Use these wall tiles in your rustic home to enhance and brighten your existing decor.

A refined white marble baseboard molding that infuses your space with natural elegance and contemporary charm. This timeless classic effortlessly elevates any interior with a touch of understated luxury and lasting sophistication

Incredible price for this marble baseboard for our kids room. Got quotes that were twice as high. Honed finish is beautiful and timeless!. Anonymous. Sun Aug 02 2026

Refresh your interiors with the Marino 5" x 10" glossy porcelain fluted slat wall tile, a blend of elegant texture and lasting durability. Each tile features pre-scored grooves that replicate the look of finely crafted slats, designed to be fully grouted for a smooth, dimensional surface. The glossy finish enhances light reflection, bringing depth and sophistication to walls and backsplashes. Available in a curated palette of beige, green, blue, and cream, the Marino Collection balances subtle warmth with refined style. Whether paired with complementary grout for a seamless effect or contrasted for bold visual impact, these tiles invite creative expression. Built to endure and easy to maintain, Marino delivers timeless beauty and versatile design for both residential and light commercial spaces.

Beautiful tile! Super happy with how it turned out!. Bethany. Grand Rapids, MI. Mon Jul 13 2026

Hexagon Carrara Marble, Gray Marble, Natural Marble,For Wall And Floor,Honed Finished Marble Tile, Natural Stone, Genuine Marble, Real Marble, 1 Box 12 Pcs

Complete your quick-turnaround, residential, and commercial vinyl flooring installations with this MS001 1 Gal. Universal Pressure-Sensitive Adhesive. This fast, roller-applied adhesive bonds to all grade levels, including concrete, well-bonded cementitious underlayments, APA-grade underlayment plywood (untreated), radiant-heated subfloors where temperatures do not exceed 85 degrees F (29 degrees C), ceramic tile, metal, certain epoxy coatings and existing, fully-adhered, non-cushion-backed resilient. One gallon covers 220 to 260 sq. ft., and this adhesive is immediately open to traffic.

Worked well for the flooring I am installing.. Mary. Midland, MI. Fri May 01 2026

The Armor LV25 is a solvent-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor LV25 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor LV25 also doubles as a cure and seal and can be applied to new concrete. The Armor LV25 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Great product, high quality and speedy delivery. Anonymous. Tue Apr 14 2026

Ultimate Granite Clean & Seal- New AC Technology allows for this unmatched performance of granite cleaner and sealer in-1!

Smells really good. Clean granite to a shine. Description match product.. Dionne. Scarborough, ON. Tue Mar 01 2022

This 2.5kg (5.5lb) bucket of Starlike EVO's 205 Travertino is part of our Warm Collection Finishes, which features a gradual transition between 10 warm shades of grout, all carefully balanced from one to the next, to ensure an exact solution for grout on your tile backsplash or decorative tile job. Our NEW Starlike EVO tile grout is a Two-component, Acid Resistant epoxy grout for laying and grouting all types of tiles and mosaics with joints 1mm (3/64) to 15 mm (19/32) in. width. World's leading high-performance and high-fashion grouting material. This Litokol Epoxy grout is extremely easy to install and maintain. Can also be used as an adhesive. We also offer several The Tile Doctor Shimmer / Glitter additives that you can add to any of our 150 finish colors for endless mixing possibilities. Product with ultra-low volatile organic compound (VOC) emissions. When applying grout to tile we recommend using The Tile Doctor Green Epoxy Float. This float is specially designed to spread grout into joints when grouting tile with epoxy-based grout.

Quality product and was able to mat h up perfectly. Brian. NY. Mon Oct 17 2022

Ultimate High Gloss Sealer- A high gloss topical protective coating that creates a durable, crystal clear finish on the slate, saltillo, concrete pavers, and more. This new AC Technology has the easiest, safest and fastest application in the industry, is self-leveling, and penetrates the substrate to protect against oil and water-based stains.

Definitely high gloss. Works well for my application.. Prue. Connecticut. Thu May 07 2026

Recirculation kit for all XOB, XOBI, XOP, and XOI models – includes parts for initial installation and two XORFND activated carbon filter elements.

Works excellent actually as described. Diane. Florida. Sat Oct 11 2025

The bevel is on 2 long sides of the threshold. Bevels and the top surface of the thresholds are polished. All-natural stones are products of nature. The picture seen is for representation only. Natural colors and shades will vary from one piece to another. No two pieces of products will be alike. The product is natural stone marble, so imperfections are normal. Very small chips on the end are normal, as tiles are cut 60 inches and left unfinished at the end.

Was perfect in our bathroom. Shayna. Chesapeake Beach, MD. Tue Jul 07 2026

Aquabar B floor and tile underlayment is an extremely effective moisture vapor retarder for use in a variety of interior construction applications. Consisting of two layers of Kraft paper laminated with asphalt, Aquabar B is a non-reinforced 30/30/30 duplex-type Grade B paper. In the battle against interior moisture damage, the best defense is a strong offense. When you block moisture vapor from creeping underneath finish materials or reaching moisture-sensitive substrates, you help increase the useful life and appearance of surface finishes. To help win the battle, the Fortifiber Building Systems Group offers Aquabar "B" as inexpensive insurance to reduce moisture-related problems.

This is a perfect under flooring product. It’s good quality. Highly recommend.. Donna. Shreveport, LA. Sat Nov 16 2024