4x8 Wood Paneling Oak

Our Fluted Scallop Paneling is made from solid oak sourced from the Pacific Northwest. All panels come with an interlocking edge for a seamless installation. Comes in natural, unfinished raw red oak so you can stain it, paint it or leave it. Proudly Made in the USA.

Came in quickly and accurately. It looks beautiful quality. Autumn. Tue Sep 29 2026

Our Fluted Round Paneling is made from solid red oak sourced from the Pacific Northwest. All panels come with an interlocking edge for a seamless installation. Comes in natural, unfinished raw red oak so you can stain it, paint it or leave it. Proudly Made in the USA.

Our Fluted Thin Scallop Paneling is made from solid red oak sourced from the Pacific Northwest. All panels come with an interlocking edge for a seamless installation. Comes in natural, unfinished raw red oak so you can stain it, paint it or leave it. Proudly Made in the USA.

Very good. Kisuke. Lexington, KY. Thu Aug 13 2026

Our stain-grade hobby boards are the perfect choice for any professional or DIY project. The natural beauty of real wood makes these boards an excellent choice for any project that requires a touch of elegance. They are available in several sizes, and come in packs of various quantities, making it easy to find the right amount for your project. They are easy to work with, and can be cut, drilled, and screwed for easy assembly.

Instantly transform any room with our 3/8" x 3-3/4" Tongue and Groove Paneling. This stunning, high-quality paneling is designed for versatile use on both walls and ceilings, bringing the timeless elegance and warmth of genuine American hardwoods into your home. Featuring a precise tongue and groove profile, this paneling is engineered for a quick, secure, and seamless fit. The interlocking design ensures a beautiful, professional-grade finish, even for the DIY enthusiast.

Introducing our versatile and high-quality decorative wood tambour panels, now with added sound dampening capabilities. These tambour panels are perfect for a variety of applications, including walls, ceilings, wainscoting, pole wraps, bar fronts, drawer fronts, and tambour doors. Crafted from solid Maple wood, harvested and manufactured in the USA, the unfinished tambour sheets are flexible and can bend at slat joints to allow for curved applications with a minimum radius of 2 inches. The 3/4" half-round groove pattern adds a classic touch to any space, while the sound dampening material inside the panel helps reduce noise levels. Upgrade any space with our decorative wood tambour panels, available in two beautiful wood species, and now with added sound dampening capabilities to help create a quieter and more peaceful environment.

Totally changed the look on our living room cabinet.. Tom. Roach, MO. Sun Apr 19 2026

Our collection of hardwood hobby and appearance boards offers versatile options for any project, big or small. Available in species like oak, maple, and cherry, these boards are precision-milled for quality and durability. Perfect for shelving, trim, or custom carpentry, they’re easy to stain, paint, or leave unfinished to highlight the natural wood grain. Ideal for both pros and DIYers, our boards provide the strength and beauty to elevate any woodworking project.

It is as described “unfinished wood board.” Great if you need a board. That’s wood. And unfinished.. Tasha. Truckee, CA. Wed Aug 26 2026

Our Fluted Round Paneling is made from solid oak. All panels come with a shiplap edge for easy installation so you can hide the nails. Comes in natural raw oak so you can stain it, paint it, or leave it raw. Proudly made in our sunny factory in Portland.

Our stain-grade hobby boards are the perfect choice for any professional or DIY project. These boards are made with a durable MDF core and are covered in high-quality wood veneers. The natural beauty of real wood makes these boards an excellent choice for any project that requires a touch of elegance. They are available in several sizes, and come in packs of various quantities, making it easy to find the right amount for your project. They are easy to work with and can be cut, drilled, and screwed for easy assembly.

Anonymous. Sat Mar 21 2026

Model NES-483-1-WAL-4 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 4 ft. half round wood tambour wall panel crafted from solid North American furniture-grade Walnut. Each sheet covers approximately 4 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to an 8 in. minimum radius. The half round profile stands 3/8 in. proud of the backer with 1 in. wide slats and 12 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-483-1-WAL-4 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 5 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Our Fluted Round Paneling is made from solid oak. All panels come with a shiplap edge for easy installation and so you can hide the nails. Comes in natural raw oak so you can stain it, paint it or leave it raw. Proudly made in our sunny factory in Portland.

Model NES-311-PP is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 8 ft. fluted pencil wood tambour wall panel crafted from solid North American furniture-grade Paintable Pine. Each sheet covers approximately 8 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to an 8 in. minimum radius. The fluted pencil profile stands 3/8 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-311-PP for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 9 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Add a touch of natural beauty to your home with wood slat wall panels. Perfect for DIY projects such as accent walls, kitchen islands, cabinets or ceilings. The vertical slats create a sense of depth and movement, and the wood grain can add a warm and inviting feel. Wood slat walls can be used to create a variety of different looks, from rustic and industrial to modern and minimalist. Unfinished wood slat walls can be stained to showcase the natural organic beauty of the wood grain. Or slats can be painted to brighten a room or add a darker color for a more luxurious look. Choose Noir Black for a dramatic accent. Best suited for indoor use. Produced with Midwest craftsmanship in Elkhart, Indiana.

Fast shipping, arrived in great condition. Ready for staining. Best price I could find on real wood slats.. Lea. Kalamazoo, MI. Sat May 23 2026

Model NES-311-MP-4 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 4 ft. fluted pencil wood tambour wall panel crafted from solid North American furniture-grade Maple. Each sheet covers approximately 4 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to an 8 in. minimum radius. The fluted pencil profile stands 3/8 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-311-MP-4 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 4.5 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-373-RO is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 8 ft. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Red Oak. Each sheet covers approximately 8 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-RO for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 7 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Our Fluted Classic Bead Paneling is made from solid red oak sourced from the Pacific Northwest. All panels come with an interlocking edge for a seamless installation. Comes in natural, unfinished raw red oak so you can stain it, paint it or leave it. Proudly Made in the USA.

It took a while to arrive but it’s worth it. I used it to cover some MDF in my kitchen that I was not happy with. It looks so much better now.. Mahsa. Miami, FL. Mon Jan 22 2024

Homacer provides you with high-quality solid pine wood barn doors suitable for rolling and sliding purposes. Depending on your needs, these doors could be used as bedroom doors, pantry doors, laundry room doors, closet doors, cabinet doors, and more. Our doors come in unassembled panels, but they can be put together easily and quickly by yourself with the help of our tongue-and-groove design on the panels. These doors are also perfectly compatible with our sliding barn door hardware kits. The slanted stripe design panels allow you to flip them around as you install the door and have 4 different possible designs that you can achieve. These finished doors come in 10 different colors that you can choose from. As a company in the US, we have a professional customer service team here to assist you with any questions that you have with our products and ensure your satisfaction with our products.

Homacer provides you with high-quality solid pine wood barn doors suitable for rolling and sliding purposes. Depending on your needs, these doors could be used as bedroom doors, pantry doors, laundry room doors, closet doors, cabinet doors, and more. Our doors come in unassembled panels, but they can be put together easily and quickly by yourself with the help of our tongue-and-groove design on the panels. These doors are also perfectly compatible with our sliding barn door hardware kits. The slanted stripe design panels allow you to flip them around as you install the door and have 4 different possible designs that you can achieve.

I installed two of these doors in a recent bathroom remodel and am very happy with them. They look great and were fairly easy to build. One piece on one of the doors required light sanding to make it fit with into the pre-cut holes but otherwise no issues. Two notes: 1. There is a strong odor at unboxing. I recommend building these outside, if possible, and definitely leaving outside for a few days to off-gas before installing on an interior project. I left them on my balcony. 2. They do not come with tracks/rails or hardware. Those must be ordered seperately.. Kristin. South Pasadena, CA. Sun Aug 02 2026

Model NES-1624-MP-4 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 4 ft. square fluted wood tambour wall panel crafted from solid North American furniture-grade Maple. Each sheet covers approximately 4 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 10 in. minimum radius. The square fluted profile stands 3/4 in. proud of the backer with 1.5 in. wide slats and 8 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-1624-MP-4 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 9 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-373-WAL-4 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 4 ft. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Walnut. Each sheet covers approximately 4 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-WAL-4 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 5 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Introducing the unfinished maple veneer decorative tambour panel, the perfect solution for adding a touch of elegance to any space. Featuring a versatile design with flat 3/4" wide slats and 30-degree V-grooves, this panel is suitable for use on walls, ceilings, wainscoting, pole wraps, bar fronts, drawer fronts, and tambour doors. The flexible and bendable tambour sheet allows for curved applications with a minimum radius of 3 inches, giving you even more options to create a unique look. This tambour panel is customizable to your liking, thanks to its unfinished wood veneer, ready to be stained, painted, or clear-coated. The panel is easy to install by applying construction adhesive to the flexible paper backer and mounting the panel to your surface. It can be trimmed with a fine tooth saw or cut length-wise with a utility knife for a perfect fit. Constructed with high-quality maple wood veneer and an MDF core, this panel is made in the USA, ensuring long-lasting durability. The panel size is true 8 ft. (96 in.) high x 4 ft. wide x 5/32 in. thick, making it a great fit for many different spaces. Elevate your space with the unfinished maple veneer decorative tambour panel.

Love the way this product turned out on my kitchen wall. Rolled up it can be cut with a chop box. Took a lot of adhesive and a lot of pressing, pushing and leaning on it until it started to set to get it to stay put. Well worth the effort!. Renee. Orangeburg, NY. Thu Mar 05 2026

Model NES-373-MP-4 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 4 ft. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Maple. Each sheet covers approximately 4 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-MP-4 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 3.5 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Create an attractive focal point with decorative reclaimed wood tiles. These mosaic style tiles offer 3D detail that brings sophistication to your setting. The durable construction ensures not only lasting beauty, but a simple and easy installation. They are available in rectangle or square sizes allowing for versatile design options and creativity. All panels have been naturally weathered over time by the elements allowing for that rustic warmth that can only be achieved with a real wood accent wall.  Our wood mosaic wall tiles are ideal for residential or commercial applications where you need a wow factor that sets you apart from the rest.

Jd. IL. Fri Oct 24 2025

Model NES-311-WO-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 32 in. fluted pencil wood tambour wall panel crafted from solid North American furniture-grade White Oak. Each sheet covers approximately 2.67 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to an 8 in. minimum radius. The fluted pencil profile stands 3/8 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-311-WO-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 3 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Introducing Architectural Products by Outwater Oak 6-1/4in W x 1in D x 9ft Long Fluted Wall Clading with 1-3/4 inch Angle Moulding and 24 Clips – a harmonious blend of timeless elegance and modern convenience. Elevate your interior spaces with the warm and sophisticated allure of oak, while the precisely crafted 1-3/4 inch angle moulding and included 24 clips ensure easy installation, whether you're a seasoned professional or a DIY enthusiast. This product marries enduring craftsmanship with durability, promising a lasting architectural statement that withstands the test of time. Perfect for homes, offices, or commercial spaces, it offers versatile applications, allowing you to transform your walls into captivating design focal points. With the freedom to stain or finish the oak fluted cladding to your liking, the possibilities for customization are boundless, making this product a cornerstone of aesthetic versatility and functional excellence.

This high-quality unfinished wooden door brings a touch of natural elegance and versatility to your home. Crafted from premium pine wood, it showcases a beautiful grain pattern that highlights its natural beauty. The door's unfinished surface allows you to customize it to match your personal style and home décor, whether you prefer a classic stain or a bold paint color. Perfect for interior use, this door combines durability with timeless design, making it an ideal choice for any home renovation or new construction project.

shipped super fast looks great. Regan. Cary, NC. Tue May 19 2026

Transform your space with Art3d Bamboo Wall Panels, designed to bring a touch of tropical elegance to any interior. Made from 100% natural bamboo, these panels combine sustainability, style, and versatility in one product.

This VERY EASY TO INSTALL wall panel changed the entire vibe of my bedroom. I didn’t know exactly what my room was lacking as I decorate plenty but adding this bamboo panel concentrated that corner. Savannah. Wilmington, NC. Thu Oct 15 2026

Transform your living space with Jeedeson Solid Bamboo Flooring – a beautiful, durable, and highly sustainable flooring option. Crafted using the carbonized flat pressing method, this flooring is first carbonized and then pressed at high temperatures and pressures, resulting in a floor that is more stable and more resistant to decay. This harder board stands the test of time and is better protected against dents, wear, and tear.

We have bamboo floors in our condo and our refrigerator line leaked, warping a few boards. I was hoping the color would come close, but it didn’t. That said, the color is beautiful and the quality of this flooring is excellent and the grooves line up with our current gloor. We are thinking of replacing just the small kitchen area and leaving a transition line where it changes to the lighter color. There are 14 planks in the box, and each one is 40” long, so that’s quite a lot of flooring!. Debra. Reno, NV. Fri Oct 16 2026

Model NES-483-1-PP is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 8 ft. half round wood tambour wall panel crafted from solid paintable-grade Pine. Each sheet covers approximately 8 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to an 8 in. minimum radius. The half round profile stands 3/8 in. proud of the backer with 1 in. wide slats and 12 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to take paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-483-1-PP for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 10 lbs. per sheet, it is easy for one installer to handle and fast to finish.