38 In X 12 Ft Aluminum F Channel Trim Musket 508 Quality Edge Fmus

Protect your cabinetry and add a subtle decorative touch to your kitchen with our Designer DripEdge. It fits most 15” and 18” doors designed for at-home waste can pull-outs. It comes with pre-applied UHB (ultra-high bond) tape that’s ready to apply with a simple peel. It has a slight overhang to allow for easy cleanup of spills and messes without any damage to your cabinetry. The anodized aluminum finish means it won’t chip, peel or corrode. Available in four sizes and three finish options.

I love this item so much, I have had it for almost two years now and it gets the job done. It protects the wood on my cabinet door from chipping and scratches.. Dawn. Arkansas. Sat May 23 2026

Outwater has a wide range of U channel mouldings including our selection of aluminum U channels. Our aluminum u channel mouldings feature high impact resistance and are great for use in industrial areas or warehouses. These extruded aluminum channels also offer structural support for shelving in closets and won’t buckle or sag under pressure, providing needed structural integrity. The aluminum channels are manufactured from 6063 T5 aluminum which provides some corrosion resistance and high quality finishes. This series of U channel mouldings is available in a wide range of popular sizes so finding one to fit your project is easy. This line of durable mouldings is more cost effective than stainless steel and can be used in a variety of applications such as: Edge Protection Covering Seams Shelf Edging Impact Protection

Outwater offers a variety of cap moudlings including the aluminum cap mouldings. Our aluminum cap channels are manufactured from 6063 T5 aluminum which provides some corrosion resistant properties and will stand up to high levels of wear and tear, making them perfect for use in outdoor environments. The 6063 T5 aluminum also provides great extrudability and a high-quality finish for all of the mouldings produced. Our aluminum cap mouldings are more cost effective and much lighter than stainless-steel, and can be used in an array of applications including: Frames/Signage (Store Fixture/POP) Stacked Directories Custom Signs and Displays Outdoor Signage for Parks, Gas Stations, Etc.

Outwater has a wide range of U channel mouldings including our selection of aluminum U channels. Our aluminum u channel mouldings feature high impact resistance and are great for use in industrial areas or warehouses. These extruded aluminum channels also offer structural support for shelving in closets and won’t buckle or sag under pressure, providing needed structural integrity. The aluminum channels are manufactured from 6063 T5 aluminum which provides some corrosion resistance and high quality finishes. This series of U channel mouldings is available in a wide range of popular sizes so finding one to fit your project is easy. This line of durable mouldings is more cost effective than stainless steel and can be used in a variety of applications such as: Edge Protection Covering Seams Shelf Edging Impact Protection

Outwater offers a variety of cap moudlings including the aluminum cap mouldings. Our aluminum cap channels are manufactured from 6063 T5 aluminum which provides some corrosion resistant properties and will stand up to high levels of wear and tear, making them perfect for use in outdoor environments. The 6063 T5 aluminum also provides great extrudability and a high-quality finish for all of the mouldings produced. Our aluminum cap mouldings are more cost effective and much lighter than stainless-steel, and can be used in an array of applications including: Frames/Signage (Store Fixture/POP) Stacked Directories Custom Signs and Displays Outdoor Signage for Parks, Gas Stations, Etc.

Outwater offers a variety of cap moudlings including the aluminum cap mouldings. Our aluminum cap channels are manufactured from 6063 T5 aluminum which provides some corrosion resistant properties and will stand up to high levels of wear and tear, making them perfect for use in outdoor environments. The 6063 T5 aluminum also provides great extrudability and a high-quality finish for all of the mouldings produced. Our aluminum cap mouldings are more cost effective and much lighter than stainless-steel, and can be used in an array of applications including: Frames/Signage (Store Fixture/POP) Stacked Directories Custom Signs and Displays Outdoor Signage for Parks, Gas Stations, Etc.

Outwater offers a variety of cap moudlings including the aluminum cap mouldings. Our aluminum cap channels are manufactured from 6063 T5 aluminum which provides some corrosion resistant properties and will stand up to high levels of wear and tear, making them perfect for use in outdoor environments. The 6063 T5 aluminum also provides great extrudability and a high-quality finish for all of the mouldings produced. Our aluminum cap mouldings are more cost effective and much lighter than stainless-steel, and can be used in an array of applications including: Frames/Signage (Store Fixture/POP) Stacked Directories Custom Signs and Displays Outdoor Signage for Parks, Gas Stations, Etc.

Outwater offers a variety of cap moudlings including the aluminum cap mouldings. Our aluminum cap channels are manufactured from 6063 T5 aluminum which provides some corrosion resistant properties and will stand up to high levels of wear and tear, making them perfect for use in outdoor environments. The 6063 T5 aluminum also provides great extrudability and a high-quality finish for all of the mouldings produced. Our aluminum cap mouldings are more cost effective and much lighter than stainless-steel, and can be used in an array of applications including: Frames/Signage (Store Fixture/POP) Stacked Directories Custom Signs and Displays Outdoor Signage for Parks, Gas Stations, Etc.

The extruded aluminum angle moulding is one of the many types angle mouldings that Outwater offers. Outwater’s anodized aluminum angle mouldings are manufactured from 6063 T5 aluminum, which provides great extrudability and a high-quality finish. The aluminum material also provides some corrosion-resistant properties and will stand up to high levels of everyday wear and tear. Much lighter and more cost effective than stainless-steel, aluminum corner guard extrusions can be used in a variety of applications, including: Display Construction Corner Protection Mannequin Stands Decorative Accents

Outwater's 1-inch Outside Diameter x 1/8-inch Wall Thickness Mill Finish Square Aluminum Tube is designed for strength and versatility in structural applications. This pack includes three 46-inch lengths, making it ideal for framing, supports, and custom fabrications. The mill finish aluminum provides a clean, industrial look, while the durable construction ensures long-lasting performance. Suitable for both residential and commercial projects.

Enhance your projects with Outwater's 3/4-inch Mill Finish Flat Aluminum Center Barb Tee Moulding. Each pack includes three 46-inch lengths, providing flexibility for custom installations. The center barb design ensures a secure fit, while the mill finish offers a sleek, industrial appearance. Perfect for both commercial and DIY applications.

Outwater Industries maintains an extensive inventory of products such as our color plastic cap mouldings. Our color j channels will stand up to heavy wear and tear in high trafficked areas just like the stainless steel or aluminum mouldings, without the high cost. Certain styles of our cap mouldings are also available in sets with the coordinating divider moulding for your convenience. These profiles are manufactured from high quality materials such as Styrene, PVC and ABS. Styrene is cost effective and great for color matching while PVC and ABS have a high impact strength and feature resistance to chemical abrasion. These durable profiles can be used in a variety of unique applications including: Frames/Signage (Store Fixture/POP) Stacked Directories Custom Signs and Displays Outdoor Signage Price Tag Mouldings Menu Holders

Outwater has a wide range of U channel mouldings including our selection of aluminum U channels. Our aluminum u channel mouldings feature high impact resistance and are great for use in industrial areas or warehouses. These extruded aluminum channels also offer structural support for shelving in closets and won’t buckle or sag under pressure, providing needed structural integrity. The aluminum channels are manufactured from 6063 T5 aluminum which provides some corrosion resistance and high quality finishes. This series of U channel mouldings is available in a wide range of popular sizes so finding one to fit your project is easy. This line of durable mouldings is more cost effective than stainless steel and can be used in a variety of applications such as: Edge Protection Covering Seams Shelf Edging Impact Protection

Outwater offers a variety of cap moudlings including the aluminum cap mouldings. Our aluminum cap channels are manufactured from 6063 T5 aluminum which provides some corrosion resistant properties and will stand up to high levels of wear and tear, making them perfect for use in outdoor environments. The 6063 T5 aluminum also provides great extrudability and a high-quality finish for all of the mouldings produced. Our aluminum cap mouldings are more cost effective and much lighter than stainless-steel, and can be used in an array of applications including: Frames/Signage (Store Fixture/POP) Stacked Directories Custom Signs and Displays Outdoor Signage for Parks, Gas Stations, Etc.

Outwater has a wide range of U channel mouldings including our selection of aluminum U channels. Our aluminum u channel mouldings feature high impact resistance and are great for use in industrial areas or warehouses. These extruded aluminum channels also offer structural support for shelving in closets and won’t buckle or sag under pressure, providing needed structural integrity. The aluminum channels are manufactured from 6063 T5 aluminum which provides some corrosion resistance and high quality finishes. This series of U channel mouldings is available in a wide range of popular sizes so finding one to fit your project is easy. This line of durable mouldings is more cost effective than stainless steel and can be used in a variety of applications such as: Edge Protection Covering Seams Shelf Edging Impact Protection

Outwater has a wide range of U channel mouldings including our selection of aluminum U channels. Our aluminum u channel mouldings feature high impact resistance and are great for use in industrial areas or warehouses. These extruded aluminum channels also offer structural support for shelving in closets and won’t buckle or sag under pressure, providing needed structural integrity. The aluminum channels are manufactured from 6063 T5 aluminum which provides some corrosion resistance and high quality finishes. This series of U channel mouldings is available in a wide range of popular sizes so finding one to fit your project is easy. This line of durable mouldings is more cost effective than stainless steel and can be used in a variety of applications such as: Edge Protection Covering Seams Shelf Edging Impact Protection

Add a detailed touch to your design with the primary listello trim. This aluminum molding can be placed between two tiles to create a less uniformed surface, creating dimension. The aluminum has been anodized which protects it against corrosion. See specs for more detailed information.

Looks really nice!. Aaron. US. Mon Jul 31 2023

Outwater’s color plastic divider mouldings are very durable and will withstand heavy levels of wear and tear in high trafficked areas just like our stainless-steel and aluminum profiles, without the high cost. These divider mouldings also work well with a range of lightweight materials such as carboard and corrugated plastic sheeting. A selection of our color plastic h channels are also available in sets with their coordinating cap mouldings for added convenience. These colored h channels are manufactured from high quality materials such as Styrene, PVC and ABS. These high-quality color plastic h channels can be used in a range of creative applications including: Top Loading Frames/Signage (Store Fixture/POP) Stacked Directories Custom Signs and Displays Outdoor Signage

Give your shower walls a crisp, finished edge with these aluminum square edge trim pieces. Built for 4mm Titan shower walls, they frame exposed panel edges with a sleek, low-profile design that resists moisture and everyday wear. Each pack includes two 96-inch lengths for a clean, modern finish that lasts.

Included in Outwater’s large inventory of stocked products is our line of aluminum divider mouldings. Our aluminum h divider mouldings make it easy to create custom signs for your business or display building directories. These profiles are manufactured from 6063 T5 aluminum, which provides some corrosion resistant properties and will stand up to high levels of wear and tear, making them perfect for use in outdoor environments. The 6063 T5 also provides great extrudability and high-quality finishes for our aluminum mouldings. These extruded aluminum h channels are much lighter and more cost effective than stainless steel mouldings, and can be utilized in an array of creative applications such as: Frames/Signage (Store Fixture/POP) Stacked Directories Custom Signs and Displays Outdoor Signage

Outwater has a wide range of U channel mouldings including our selection of aluminum U channels. Our aluminum u channel mouldings feature high impact resistance and are great for use in industrial areas or warehouses. These extruded aluminum channels also offer structural support for shelving in closets and won’t buckle or sag under pressure, providing needed structural integrity. The aluminum channels are manufactured from 6063 T5 aluminum which provides some corrosion resistance and high quality finishes. This series of U channel mouldings is available in a wide range of popular sizes so finding one to fit your project is easy. This line of durable mouldings is more cost effective than stainless steel and can be used in a variety of applications such as: Edge Protection Covering Seams Shelf Edging Impact Protection

Outwater’s 1/16in Mechanical Polished Aluminum Cove Moulding with Holes is a great choice for finishing and accenting surfaces. Cut to (3) 48-inch lengths, its slender design, pre-drilled holes, and polished finish suit a range of applications in modern or classic interiors.

Trim for Wall Panel

Included in Outwater’s large inventory of stocked products is our line of aluminum divider mouldings. Our aluminum h divider mouldings make it easy to create custom signs for your business or display building directories. These profiles are manufactured from 6063 T5 aluminum, which provides some corrosion resistant properties and will stand up to high levels of wear and tear, making them perfect for use in outdoor environments. The 6063 T5 also provides great extrudability and high-quality finishes for our aluminum mouldings. These extruded aluminum h channels are much lighter and more cost effective than stainless steel mouldings, and can be utilized in an array of creative applications such as: Frames/Signage (Store Fixture/POP) Stacked Directories Custom Signs and Displays Outdoor Signage

Outwater has a wide range of U channel mouldings including our selection of aluminum U channels. Our aluminum u channel mouldings feature high impact resistance and are great for use in industrial areas or warehouses. These extruded aluminum channels also offer structural support for shelving in closets and won’t buckle or sag under pressure, providing needed structural integrity. The aluminum channels are manufactured from 6063 T5 aluminum which provides some corrosion resistance and high quality finishes. This series of U channel mouldings is available in a wide range of popular sizes so finding one to fit your project is easy. This line of durable mouldings is more cost effective than stainless steel and can be used in a variety of applications such as: Edge Protection Covering Seams Shelf Edging Impact Protection

Complete your flooring project with the T-Molding for a polished, professional finish. This trim connects two floors of equal height for a seamless transition between rooms. Crafted from durable, waterproof materials, it’s built to handle everyday traffic and maintain its beauty over time. Designed to coordinate perfectly with your luxury vinyl flooring, this molding delivers both style and protection for any space.

We are so happy with this, matched the color perfectly and arrived quickly upon ordering!. Kristen. Wed Jul 29 2026

Our End Cap Edge profiles are designed for edge protection and seamless transitions at thresholds or between adjacent floor coverings of varying heights and are uniquely designed for floating flooring systems. These L-shaped profiles provide both protective and decorative edging.

Outwater has a wide range of U channel mouldings including our selection of aluminum U channels. Our aluminum u channel mouldings feature high impact resistance and are great for use in industrial areas or warehouses. These extruded aluminum channels also offer structural support for shelving in closets and won’t buckle or sag under pressure, providing needed structural integrity. The aluminum channels are manufactured from 6063 T5 aluminum which provides some corrosion resistance and high quality finishes. This series of U channel mouldings is available in a wide range of popular sizes so finding one to fit your project is easy. This line of durable mouldings is more cost effective than stainless steel and can be used in a variety of applications such as: Edge Protection Covering Seams Shelf Edging Impact Protection

Outwater has a wide range of U channel mouldings including our selection of aluminum U channels. Our aluminum u channel mouldings feature high impact resistance and are great for use in industrial areas or warehouses. These extruded aluminum channels also offer structural support for shelving in closets and won’t buckle or sag under pressure, providing needed structural integrity. The aluminum channels are manufactured from 6063 T5 aluminum which provides some corrosion resistance and high quality finishes. This series of U channel mouldings is available in a wide range of popular sizes so finding one to fit your project is easy. This line of durable mouldings is more cost effective than stainless steel and can be used in a variety of applications such as: Edge Protection Covering Seams Shelf Edging Impact Protection