38 In White Tee Handle Casement Operator 2 Pack Primeline H 3715

This operator crank handle is constructed of diecast zinc and comes in a baked-on enamel finish, engineered to resist rust and corrosion. It is designed for use on Truth brand casement and awning window operators with 11/32 inch spindles. This window crank features a set screw at the base of the handle allowing it to lock onto the spindle, and a swivel knob at the tip for ease of operation. The reach on this crank measures 2-9/16 inch and it has a 3-1/2 inch projection. This operator crank handle is easy to install, and it’s used by a variety of window manufacturers.

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

This Prime-Line H 3863 Right-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for right-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of white diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures 9-1/2 inch from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

This Prime-Line H 3864 Left-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for left-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of white diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures 9-1/2 inch from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

The Prime-Line K 55228 modern pull handle is a stylish and functional upgrade for any storm or screen door, featuring a sleek design with an inside latch for effortless operation—simply pull to open and push to close, with no buttons or levers required. Designed for universal compatibility, this handle fits doors ranging from 3/4 to 1-1/4 inches thick, and the package includes all necessary hardware for a seamless installation. Whether replacing an existing handle using pre-drilled holes or installing a new one, setup is simple with the provided installation template. This complete set includes a solid strike, inside latch, and all required mounting components to ensure a secure fit. Before purchasing, please check the line art drawing for dimensions to ensure it meets your needs.

This is a white finish left-handed, 13-1/2 in. single arm operator. It is made of heavy-duty diecast zinc with the baked on white finish. The steel arm, worm drive and gears are protected with a corrosive resistant finish, and it opens to a full 90 degrees. The plastic roller on the end of the arm insure a smooth operation as it slides through the Prime-Line part TH 22397 track. When installing, the housing easily fastens down to the window sill.

Zinc construction delivers a solid, lightweight solution for storm or screen door latches.

White Patio Door Handle Set with Cylinder Lock - 3-15/16” Screw Hole Spacing, Perfect Replacement for Sliding Glass Patio Doors

This Fix-A-Latch, strike plate repair kit is constructed of stamped steel and white plastic components, and it comes in a beautiful finish. This kit can be used to easily repair a door that fails to latch when it is closed. The kit includes a strike plate for use with a 1-3/8 inch thick interior door, and another for a 1-3/4 thick exterior door. The white plastic bases come with adhesive-back tape strips and installation fasteners for a quick and simple repair. Note: These Fix-A-Latch repair plates require a 1/8 inch clearance gap between the doorjamb and the closed door’s edge.

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

These awning operators are constructed of high pressure diecast zinc and the case and crank come in a beautiful finish. Each operator features a simple detach clip which allows the operator to disengage from the sash's center hook for quick and easy window release. This awning operator mounts on the bottom window sill of crank out awning windows, and holds the sash open at the user's desired location. These operators replace others whose roto gears may have become worn and stripped, or the spline to which the hand cranks attach. Included with each is the operator, a crank, a sash hook and installation fasteners.

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

This patio door handle set is a multi-point lockset that comes with a white left-handed inside handle and an upper body thumb turn. The inside handle mounts onto a mounting bracket that is installed onto the door. The outside handle is a white diecast pull that can be keyed with the Prime-Line part E 2000 cylinder. This set is often used on vinyl or wood patio doors. The set comes with a unique keeper and multi-point lock.

This patio door handle set is a multi-point lock set that comes with a white right-handed inside handle and an upper body thumb turn. The inside handle mounts onto a mounting bracket that is installed onto the door. The outside handle is a white diecast pull that can be keyed with the Prime-Line part E 2000 cylinder. This set is often used on vinyl or wood patio doors. The set comes with a unique keeper and multi-point lock.

Experience the fusion of functionality and aesthetics with our meticulously designed handles - the perfect companions for any sliding door. Crafted from high-quality materials, these handles promise both comfort and smooth operation, making the act of opening and closing your doors an effortless endeavor. Boasting a modern and minimalist design, our Sliding Door Handles seamlessly blend into any interior decor, infusing your space with a touch of refined elegance.

This handle was pretty basic but hard to find in basic hardware stores. It went on easily but felt a little flimsy. The screws it came with stripped immediately- needs better screws to attach. Anonymous. Sat Nov 18 2023

The Larson Heavy-Duty Push-Button Handle is designed for solid core storm doors, delivering durability, convenience, and security in one sleek package. The push-button operation allows for effortless entry and exit, while the secure latch and keyed lock add extra protection. With a surface-mount design for quick installation and a weather-resistant finish for long-lasting performance, this handle is built to withstand the elements.

Work perfectly. Anonymous. Sun Jun 14 2026

Do you have any vertical or horizontal sliding windows with loose-fitting, worn or missing locks? Besides adding a “new look” to your windows with a fresh set of locking hardware, these sash locks can help add peace of mind by restoring the security features on your sliding windows. These locks feature a design that allows them to lock single-hungs, double-hungs and some horizontal sliding windows. Each lock features a cam-type locking mechanism that mounts on the checkrail of the innermost sash and engages into the keeper that mounts onto the checkrail of the outermost sash. The upper, outermost sash on vertical sliding windows determines if it is a “single hung” or “double hung.” If the upper, outermost sash is non-movable, then it is a single hung window. A “double hung” window refers to both sash having the ability to slide up and down for ventilation purposes, and these sash locks can fit on both model types, in addition to some left/right horizontal sliding windows. The locks are constructed of diecast zinc and come in a corrosion-resistant, industry standard, white-painted finish to match other existing hardware that may already be in the home or office. Depending on the size of the sash, these locks can be used as singles or in pairs. Each set includes one lock, one keeper, installation fasteners and simple instructions. Installation of these locks is quick and easy and can be done with a simple handheld Phillips head screwdriver. Other design features include a 5/16 inch narrow keeper, cam-action fastening, and 2-1/4 inch mounting hole centers. Compare the style and dimensions of this lock to those required on your sliding windows and order yours today.

This white finish patio door handle is a surface with a hook latch style. Often found on older style patio doors, it is mounted on the door's inside the frame and the hook latch engages the keeper mounted on the jamb. It has a 7/8 in. low handle height. It is a white extruded aluminum inside handle with an anti-lift feature on the hook latch. The hook latch has a 7/16 in. profile. Mounting holes are 4-15/16 in. on center. It can be keyed by installing Prime-Line part E 2071.

Complete the look of your gate project with a smart and helpful gate handle. Stylish and ergonomic, this gate handle is aesthetically pleasing and easy to install.

Love love! And easy to install. Veronica. Stratford, CT. Tue Oct 17 2023

This is a white plastic roller assembly. The roller is made of brass flat edge and is most often used by Elco, Better- Bilt Aluminum, and a variety of other manufacturers.

This is a diecast crank handle that is used on the Truth Maxim casement operators. It extends out 3-3/32 in. from the operator housing. Ideal for low profile applications. Comes in a white finish.

Perfect! The handles are beautiful and were easy to put on. Great instructions. Karen. Hayden, ID. Fri Feb 02 2024

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

Designed to fit sliding glass doors with fits 3 ¹⁵/₁₆ inches Hole Spacing, and 1-1/4" to 2-1/4" Door Thickness (Fabrication: 3 or 4 hole patterns)

It was hard to find the dummy door handles.. Drew. Sat Oct 25 2025

The Prime-Line C 1194 Diecast and Wood Patio Sliding Glass Door Handle is an internal locking, hook style handle set and is non-handed allowing it to be used on both left and right-handed patio sliding doors. This sliding glass door handle set features an automatic unlatching option designed to prevent accidental lockouts, and it is used to replace damaged or missing internal locking hook-style handle sets on a majority of sliding glass doors. This glass sliding door handle set is constructed of mixed materials including wood and diecast components. The outside non-keyed locking pull and the inside support of the handle for sliding glass door are constructed of diecast and come finished in a white-painted color. The inside pull of the handle hardware set for sliding glass door is made of natural wood and is finished in a smooth, clear finish. The sliding glass door handle replacement is designed to fit 1 inch thick internally latching type doors using a 3-1/2 inch hole center spacing. Besides matching the style and type of locking mechanism, the other main specification to match is the measurement of the mounting hole centers, from center-2-center.

Finally hardware that fits old sliding doors!. Marine. Bal Harbour, FL. Tue Nov 19 2024

This Prime-Line H 3501 casement operator is constructed of a diecast housing and crank handle, with a 8 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the left side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3502 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the left side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3505 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the left side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3708 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the left side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

This patio door handle set comes with an inside handle with a hardwood pull and white diecast body. It is non-handed and can be used on right or left-handed doors. It is used by many patio door manufacturers.

Anonymous. Sun May 17 2026

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

Do you have a hinged door in your home or office, classroom or shop that could use a door stop and holder? These door stops with pivoting holders are designed to do exactly that; stop the door at a specific spot and hold it open when necessary. Spare yourself the work, the mess, and the expense of having to drill holes into your finished walls, baseboards, and floors. Instead, use this easy-to-install door stop-and-hold device that mounts onto any hard-finished flooring. The door-holding catch on the pivoting arm can then be swung around the door’s edge to hold it open, which is ideal when carrying in items, loading up the vehicle, or even just for better ventilating with the outdoor air. Equipping a self-closing door with one of these stop bumpers and door retainers work great with doors that close when forced by a spring, a pneumatic closer, gravity, or even just a slight breeze. The stop and bumper feature also help to avoid an opening door from impacting and damaging an adjacent wall, woodwork, and other household furnishings. Holding a door open with a simple device like these could not get any easier, as their method of installation requires no tools or fasteners. Order yours today.

This is a reversible, anti-lift window and door lock. It securely locks your window or door in palace to allow both ventilation and also helps preventing the window or patio door from being lifted out of the track. Each is constructed from extruded aluminum and then the body is painted white. They are easy to put in place and secure with the included thumb screw. Order yours today.

This patio door handle is a surface with clamp latch style. Used exclusively by International Windows on their 950 series patio doors. It mounts on the door's inside frame and the clamp latch latches onto an extrusion (astragal) on the jamb. The clamp is unique due to its teeth like design. It has a 2-1/8 in. inside handle height. Mounting holes are 3 in. on center. It is non-handed and can be used on either right or left-handed doors. The outside handle is a non-keyed black flush mount made of extruded aluminum. Purchase Prime-Line part E 2000 to key this unit.

Anonymous. Tue Mar 26 2024

Outside screw holes snapped. See pics. Wayfair was the only place I could find in brushed nickel. Anonymous. Sun Feb 09 2025

The Rockwell Modena sliding door handle set features a 10” long handle and an 11” escutcheon plate. This handle set is non-handed and will work on both left and right-handed doors. Able to fit doors ranging in thickness between 1 ½” to 1 ¾” with either a 3-hole or 4-hole bored with a screw hole distance of 3 15/16”. Each set includes interior and exterior handles and escutcheon plates, thumb latch, and mounting fasteners (mortise lock is not included)

So glad we found this for a client, simple fix. Stacey. Panama City Beach, FL. Tue Aug 25 2026

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

The included hardware kit contains all necessary screws, bolts, washers, and an Allen key for assembly. Parts are neatly packaged for easy sorting, and the step-by-step instructions help you complete installation quickly for a secure, stable setup.

These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a retaining ring to add strength at the insertion point when the lock is engaged. These patio door pin locks are designed to secure the sliding door in place when in a closed or ventilating position. These lock pins include all installation fasteners and they are simple to install.

This Prime-Line folding crank handle fits most casement operator crank spindles. It is diecast construction with a coppertone finish. The 11/32 inch spline system will only fit 11/32 inch casement operators. It is easy to install. The folding design is often used to replace the normal crank handle to avoiding interference with window blinds.

Didn’t work. Maybe with only particular windows but how could you know.. Sally. Detroit, MI. Wed Nov 27 2024

The Rockwell Charlotte handles are the traditional sliding door handles. It is a 2 piece construction handle and is available in a back-to-back C handle or with an exterior finger pull. The Charlotte sliding door handles have a good finger clearance but do have a profile height of 1.95 inches and may not clear all screen doors. They come standard in a private version but are also available in a limited edition with the key locking cylinders preinstalled in the offset keylock position. The handles are Non-handed and suitable for either right or left-hand doors. The Charlotte handles are suitable for 0.171″ diameter screw-hole door face bores.

Great quality and assembled in minutes. Brian. Thu Jun 06 2024

If your sliding patio door handle is old, damaged or missing, don’t get a brand new door – just replace the door handle! This C 1225 sliding patio Door handle set makes the DIY project a breeze, and it includes an inside pull with an outside non-locking pull. Installation is quick and easy, all fasteners necessary are included, and the set is non-handed, allowing it to be used on both left and right-handed patio sliding doors. It is a mortise style and fits 3-15/16” hole spacing. The door handle set is constructed of white painted diecast materials, perfect for your white sliding patio door. Because there are multiple internal mortise locks that are compatible with this handle set, a mortise lock component is not included with this handle set. Although the C 1225 sliding patio Door handle set comes non-keyed, Prime-Line Products does manufacture other components that can convert this set to a keyed-locking handle set.

Very easy to install.. Rory. Burlington, ON. Fri Apr 07 2023

This Prime-Line H 3507 casement operator is constructed of a diecast housing and crank handle, with a 8 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3508 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3709 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

Prime‑Line® hex head cap screws provide strong, precise fastening for a wide variety of home repair, maintenance, and mechanical applications. Designed with a uniform machine thread and a six‑sided hex head, these screws allow for easy installation and high clamping force using standard wrenches or sockets. Ideal for metal‑to‑metal and metal‑to‑plastic assemblies, Prime‑Line hex head cap screws are commonly used in appliances, automotive repairs, machinery, fixtures, and general household projects. For best results, they are intended for use with same‑size matching nuts and washers to ensure proper fit, even load distribution, and long‑lasting performance. Manufactured from quality materials for strength and durability, Prime‑Line hex head cap screws deliver consistent results. Trusted by DIY homeowners and professionals across the U.S., they make it easy to complete projects with confidence and reliable holding power.

This patio door handle set is constructed of diecast and comes in a white painted finish. It features an anti-lift design and latches with dual hooks. This sliding door handle set is used to replace surface-mounted hook latch handles of sliding glass doors. A keeper and installation fasteners are included with each handle set.

Prime‑Line® finished hex nuts provide clean lines, reliable fastening, and a polished appearance for a wide range of home repair and improvement projects. Designed with a smooth, finished exterior and standard hex shape, these nuts offer dependable thread engagement and easy tightening using common hand tools. Ideal for furniture assembly, fixtures, appliances, shelving, and light‑duty mechanical applications, Prime‑Line finished hex nuts are intended for use with same‑size matching bolts or machine screws to ensure proper fit and secure performance. Manufactured from quality materials for strength and durability, they deliver consistent holding power while providing a more refined look than unfinished fasteners. Trusted by DIY homeowners and professionals across the U.S., Prime‑Line finished hex nuts make it easy to complete projects with strength, reliability, and a clean, professional finish.

This window guide is constructed from nylon. It features a snap-in design and helps keep your windows energy efficient. Used on Pacific, old-style windows.

Prime-line part F 2915 is a window sash lock for use on single-hung and double-hung vertical sliding windows. This item includes a sash lock, keeper, fasteners, and easy-to-follow installation instructions. These locks are constructed of diecast and fit atrium windows. The locks and keepers are coated with a corrosion-resistant, long-lasting painted finish. Prime-line sash locks like these are used nationwide, but they are typically found in homes and apartments in North Carolina and Texas. Sash locks like these are used by many to replace damaged or missing locks and install them easily with a simple Phillips head screwdriver.

This sliding door handle set is constructed from die-cast and comes finished in white. It features inside and outside pulls with a thumb lever and a reversible handle. This handle set is mortise style and uses E-2000 to the key lock.

Perfect size replacement. Mary. US. Thu Jun 22 2023

This Prime-Line H 3711 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3833 casement operator is constructed of a diecast housing and crank handle, with a 8 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

So easy to install. Looks so good!. Jessica. Santa Clarita, CA. Thu May 07 2026