20 X20 Magnetic Vent Cover

Stellar Air decorative air intake covers are Magnetic and are made to replace the unattractive exhaust fan covers in your living space. Our unique designs will enhance the room by adding wall art to your hall, living room, ceiling or any space of your house. We transform eyesore air filter covers into beautiful wall decor. Our unique “snap in“ magnetic design means our vent covers can be easily installed without any drilling or headaches. You just have to remove your old ugly metal grill and snap in our Stellar Air vents. We include a new metal frame box, in case you need it and to guarantee a perfect fit. Please order by filter size behind the grill or the duct opening, measure correctly and do not measure your existing cover.

It added a custom look to my air conditioner vent.. Rhonda. Somerville, AL. Tue Jun 30 2026

Stellar Air decorative air intake covers are Magnetic and are made to replace the unattractive exhaust fan covers in your living space. Our unique designs will enhance the room by adding wall art to your hall, living room, ceiling or any space of your house. We transform eyesore air filter covers into beautiful wall decor. Our unique “snap in“ magnetic design means our vent covers can be easily installed without any drilling or headaches. You just have to remove your old ugly metal grill and snap in our Stellar Air vents. We include a new metal frame box, in case you need it and to guarantee a perfect fit. Please order by filter size behind the grill or the duct opening, measure correctly and do not measure your existing cover.

Not cheap but worth it! Vent cover!!!!. Joyce. US. Sat Jan 17 2026

Stellar Air decorative air intake covers are Magnetic and are made to replace the unattractive exhaust fan covers in your living space. Our unique designs will enhance the room by adding wall art to your hall, living room, ceiling or any space of your house. We transform eyesore air filter covers into beautiful wall decor. Our unique “snap in“ magnetic design means our vent covers can be easily installed without any drilling or headaches. You just have to remove your old ugly metal grill and snap in our Stellar Air vents. We include a new metal frame box, in case you need it and to guarantee a perfect fit. Please order by filter size behind the grill or the duct opening, measure correctly and do not measure your existing cover.

Packaged well, easy to install Looks great, leaving natural to work with our wood finish wall, best part is wife is very happy!. Calvin Vander. Statesville, NC. Wed Jan 15 2025

Surface mount PVC gable vents are not only long-lasting, durable, and easy to install, they instantly add tremendous value and character to the exterior of a home. Upon arrival, the PVC should be painted before installation with the exterior color of your choosing. PVC gable vents are available in a functional option, to allow air flow, and in a non-functional option, if you want to simply enhance the architectural features of your home. Keep the traditional look of an exterior gable vent, without the downsides of traditional wood, by ordering PVC gable vents.

Sturdy construction, but was hoping to have more air movement (slant opening is kind of small (1/4 -3/8" width). It does look nice on our 1918 barn that we are restoring.. Harold. Kansas. Mon Jul 17 2023

Stellar Air decorative air intake covers are Magnetic and are made to replace the unattractive exhaust fan covers in your living space. Our unique designs will enhance the room by adding wall art to your hall, living room, ceiling or any space of your house. We transform eyesore air filter covers into beautiful wall decor. Our unique “snap in“ magnetic design means our vent covers can be easily installed without any drilling or headaches. You just have to remove your old ugly metal grill and snap in our Stellar Air vents. We include a new metal frame box, in case you need it and to guarantee a perfect fit. Please order by filter size behind the grill or the duct opening, measure correctly and do not measure your existing cover.

Shipped safely. Really nice quality and just as described! I can’t wait to elevate my dining room from the old, clunk grate to this one.. Hillary. Birmingham, AL. Mon Apr 28 2025

This rectangular vent grille features a clean matte white finish that seamlessly integrates with any modern interior design. The sleek rectangular design incorporates four horizontal linear slots with dark interior channels that create an attractive contrast against the white frame. Unlike standard grilles with visible mounting screws, this model uses hidden fasteners for a cleaner, more professional appearance. The matte white powder-coated finish resists fading and yellowing over time while maintaining its pristine look. The dust-resistant design features smooth surfaces that prevent buildup and make cleaning effortless. This versatile grille works perfectly for both ceiling and wall installations, making it ideal for residential and commercial HVAC applications. The modern linear aesthetic complements contemporary architecture and interior designs, from minimalist kitchens to sophisticated office spaces. The durable construction ensures long-lasting performance while the streamlined profile maintains optimal airflow efficiency. This grille represents a significant upgrade from traditional vents, offering superior aesthetics without compromising functionality.

Great modern look. Had to measure duct opening and not previous grill. Made that mistake on first order. The grill is very nice looking and looks great in my modern kitchen. Will buy more. A reminder that you have to open vents before installing.. Jesse. Chicago, IL. Thu Apr 09 2026

Stellar Air decorative air intake covers are Magnetic and are made to replace the unattractive exhaust fan covers in your living space. Our unique designs will enhance the room by adding wall art to your hall, living room, ceiling or any space of your house. We transform eyesore air filter covers into beautiful wall decor. Our unique “snap in“ magnetic design means our vent covers can be easily installed without any drilling or headaches. You just have to remove your old ugly metal grill and snap in our Stellar Air vents. We include a new metal frame box, in case you need it and to guarantee a perfect fit. Please order by filter size behind the grill or the duct opening, measure correctly and do not measure your existing cover.

The CleanVent Tropical Pattern Refer to how to measure guide below to find your vent sizing. The ceiling vent is one of the most overlooked details in a room: the CleanVent sits flat to the ceiling making it part of the ceiling not an obstruction. The CleanVent brings a hint of design to your ceiling, eliminating the cluttered look of vents protruding into a flat ceiling. The CleanVent is a magnetic, screw-less, retrofit vent cover: featuring hidden air flow tabs. It is easily repositioned when installed, which can fix the problem of improper installed, crooked or misaligned vents. The CleanVent attaches via magnets screwed into the vent box itself, pulling the vent box tight to the ceiling which can eliminate vent sweating. Easily removed for cleaning and painting. Each CleanVent is manufactured in the USA out of .040 5052-H32 aluminum, (not plastic). The CleanVent and defusing screen are powder-coated in gloss white and can be painted. The Inner air flow tabs are .040 stainless steel and can be positioned in any direction. Please note the CleanVent sizes are for inside vent measurements, the overall size of the CleanVent is 1-1/2 inches bigger on all 4 sides for the frame around the vent opening. Example a 6 x 6 vent overall size is 9 x 9, which gives plenty of room for covering up ceiling stains and crooked installed vents.

Exactly what I needed for our very modern home. Easy to install and works very well. A bit of a wait on shipping, but well worth it. Yesha. Makawao, HI. Wed Jul 08 2026

Stellar Air decorative air intake covers are Magnetic and are made to replace the unattractive exhaust fan covers in your living space. Our unique designs will enhance the room by adding wall art to your hall, living room, ceiling or any space of your house. We transform eyesore air filter covers into beautiful wall decor. Our unique “snap in“ magnetic design means our vent covers can be easily installed without any drilling or headaches. You just have to remove your old ugly metal grill and snap in our Stellar Air vents. We include a new metal frame box, in case you need it and to guarantee a perfect fit. Please order by filter size behind the grill or the duct opening, measure correctly and do not measure your existing cover.

Darlene. Bowie, MD. Wed Jun 17 2026

The CleanVent classic pattern Refer to how to measure guide below to find your vent sizing. The ceiling vent is one of the most overlooked details in a room: the CleanVent sits flat to the ceiling making it part of the ceiling not an obstruction. The CleanVent brings a hint of design to your ceiling, eliminating the cluttered look of vents protruding into a flat ceiling. The CleanVent is a magnetic, screw-less, retrofit vent cover: featuring hidden air flow tabs. It is easily repositioned when installed, which can fix the problem of improper installed, crooked or misaligned vents. The CleanVent attaches via magnets screwed into the vent box itself, pulling the vent box tight to the ceiling which can eliminate vent sweating. Easily removed for cleaning and painting. Each CleanVent is manufactured in the USA out of .040 5052-H32 aluminum, (not plastic). The CleanVent and defusing screen are powder-coated in gloss white and can be painted. The Inner air flow tabs are .040 stainless steel and can be positioned in any direction. Please note the CleanVent sizes are for inside vent measurements, the overall size of the CleanVent is 1-1/2 inches bigger on all 4 sides for the frame around the vent opening. Example a 6 x 6 vent overall size is 9 x 9, which gives plenty of room for covering up ceiling stains and crooked installed vents.

Eric. Los Angeles, CA. Sat Oct 14 2023

The Magnetic Vent Covers magnetically seal the air from passing through closed metal vents. It cuts easily with scissors to size and can be painted or papered to match any decor.

They work perfectly to close vents!. Grace. Simi Valley, CA. Fri Oct 14 2022

4pc Floor Vent Cover Rectangular Vent Screen Cover Magnetic PVC Ventilation Net Floor Storage Plastic Cover

The CleanVent contemporary pattern Refer to how to measure guide below to find your vent sizing. The ceiling vent is one of the most overlooked details in a room: the CleanVent sits flat to the ceiling making it part of the ceiling not an obstruction. The CleanVent brings a hint of design to your ceiling, eliminating the cluttered look of vents protruding into a flat ceiling. The CleanVent is a magnetic, screw-less, retrofit vent cover: featuring hidden air flow tabs. It is easily repositioned when installed, which can fix the problem of improper installed, crooked or misaligned vents. The CleanVent attaches via magnets screwed into the vent box itself, pulling the vent box tight to the ceiling which can eliminate vent sweating. Easily removed for cleaning and painting. Each CleanVent is manufactured in the USA out of .040 5052-H32 aluminum, (not plastic). The CleanVent and defusing screen are powder-coated in gloss white and can be painted. The Inner air flow tabs are .040 stainless steel and can be positioned in any direction. Please note the CleanVent sizes are for inside vent measurements, the overall size of the CleanVent is 1-1/2 inches bigger on all 4 sides for the frame around the vent opening. Example a 6 x 6 vent overall size is 9 x 9, which gives plenty of room for covering up ceiling stains and crooked installed vents.

Begonia. CA. Thu Nov 06 2025

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

Surface mount PVC gable vents are not only long-lasting, durable, and easy to install, but they instantly add tremendous value and character to the exterior of a home. Upon arrival, the PVC should be painted before installation with the exterior color of your choosing. PVC gable vents are available in a functional option, to allow airflow, and in a non-functional option if you want to simply enhance the architectural features of your home. Keep the traditional look of an exterior gable vent, without the downsides of traditional wood, by ordering PVC gable vents.

Came as pictured - worked great!. Shana. TX. Mon Apr 06 2026

This sleek OKUN linear air vent features a modern square design with a pristine matte white finish that seamlessly blends into any ceiling or wall installation. The grille showcases four horizontal louvers with a sophisticated linear pattern that provides excellent airflow distribution while maintaining an ultra-clean aesthetic. The innovative hidden screw design eliminates visible fasteners for a flawless appearance, while the dust-resistant construction prevents buildup and maintains long-term performance. The fade-resistant matte white coating ensures the finish won't yellow or discolor over time, unlike standard plastic grilles. The precision-manufactured louvers allow optimal air circulation with minimal noise, making it perfect for residential and commercial HVAC systems. Installation is versatile for both ceiling and wall mounting, adapting to various architectural styles from contemporary to traditional. The square format and neutral finish complement any interior design scheme while the robust construction ensures reliable operation. This premium air vent combines functional performance with aesthetic appeal, delivering professional-grade ventilation without compromising visual design elements.

The vent cover arrived quickly and in good condition. I like the modern, clean style and the screws are hidden. The installation instructions are clear and remind you multiple times to measure the opening and purchase the cover appropriate for the space. There is no wheel or mechanism to open and close the baffles. You use your fingers or a screwdriver which could be a pain if you are using it in a ceiling or other difficult to access area. I have not installed yet but as I said its pretty straightforward as long as I have the right size.. Sharon. Wilkes Barre, PA. Mon May 04 2026

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, invincible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

Moisture Control & Strong Airflow, Opening 14"x14" White Paintable

For the CleanVent contemporary pattern refer to the How to Measure guide below to find your vent sizing. The ceiling vent is one of the most overlooked details in a room: the CleanVent sits flat to the ceiling making it part of the ceiling, not an obstruction. The CleanVent brings a hint of design to your ceiling, eliminating the cluttered look of vents protruding into a flat ceiling. The CleanVent is a magnetic, screw-less, retrofit vent cover: featuring hidden air flow tabs. It is easily repositioned when installed, which can fix the problem of improperly installed, crooked, or misaligned vents. The CleanVent attaches via magnets screwed into the vent box itself, pulling the vent box tight to the ceiling which can eliminate vent sweating. Easily removed for cleaning and painting. Each CleanVent is manufactured in the USA out of .040 5052-H32 aluminum, (not plastic). The CleanVent and defusing screen are powder-coated in gloss white and can be painted. The Inner airflow tabs are .040 stainless steel and can be positioned in any direction. Please note the CleanVent sizes are for inside vent measurements, the overall size of the CleanVent is 1-1/2 inches bigger on all 4 sides for the frame around the vent opening. For example, a 6 x 6 vent overall size is 9 x 9, which gives plenty of room for covering up ceiling stains and crooked installed vents.

I got this for my master bathroom and love it!. Susanne. FL. Fri Mar 20 2026

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

Fresh Air, Lasting Performance – Ventilate with Ease: Is your house stuffy and your dryer needs ventilation? Our vent outlet provides a quick and efficient solution to improve airflow. Made from long-lasting materials, it ensures easy installation and long-lasting performance.

This vent was fairly easy to install and seems to be adequate in reducing humidity in our small bathroom.. Zaida. Tuscaloosa, AL. Fri Nov 21 2025

Modern contemporary pattern. Refer to the How to Measure guide below to find your vent sizing. The ceiling vent is one of the most overlooked details in a room: the CleanVent sits flat to the ceiling making it part of the ceiling, not an obstruction. The CleanVent brings a hint of design to your ceiling, eliminating the cluttered look of vents protruding into a flat ceiling. The CleanVent is a magnetic, screw-less, retrofit vent cover: featuring hidden airflow tabs. It is easily repositioned when installed, which can fix the problem of improperly installed, crooked, or misaligned vents. The CleanVent attaches via magnets screwed into the vent box itself, pulling the vent box tight to the ceiling which can eliminate vent sweating. Easily removed for cleaning and painting. Each CleanVent is manufactured in the USA out of .040 5052-H32 aluminum, (not plastic). The CleanVent and defusing screen are powder-coated in gloss white and can be painted. The Inner airflow tabs are .040 stainless steel and can be positioned in any direction.

I was having so much trouble with my bathroom vent until I found this vent cover. I love and I like that fact that you can order it in different sizes. I will be purchasing more of these for the rent of the bathrooms.. Joyce. North Wildwood, NJ. Thu May 14 2026

This stainless steel crawl space access door features a modern minimalist design, offering robust reliability and extended longevity. Its smooth surface and refined lines not only elevate the aesthetic appeal of any space but also ensure security and privacy. It serves as an ideal solution for your home or commercial space, infusing every inch with a sense of quality.

To measure your size correctly, remove the existing vent cover and measure the size of the duct. The duct opening size is what should be ordered. The Ribbon grille is a resin (polyurethane) decorative vent cover that is light in weight yet sturdy and strong. Grilles are unfinished and ready for you to primer and paint to achieve the perfect color for your setting. Each grille is made using a casting process that allows for a three-dimensional look. Grilles will not rust and are not prone to corrosion which makes them excellent for high-humidity areas and dry areas alike. Ribbon grilles are flat on the back and have no inserts. Grilles should not be used on the floor and are only for wall and ceiling applications for central air conditioning and heating systems. Due to the nature of the curing process, grilles can vary very slightly in size so please take the measurements as an approximate size. All grilles should be installed using the provided screws to ensure a safe application. Please note, that these grilles are intended to be primed/painted and will come in an off-white beige color.

Pefect for painting and worked perfectly. Brittany. Midlothian, VA. Sat Jul 18 2026

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

Floor Vent Cover Rectangular Vent Screen Cover Magnetic PVC Ventilation Net Floor Storage Plastic Cover

LONG LASTING and MONEY SAVING Our heat and cold air deflectors are built from heavy-duty plastic and super strong magnets delivering both quality and performance you deserve when making any purchase. An evenly heated or cooled room is one that will save you money and over handling your units making sure you don’t push your HVAC system to a point where it is overworking and can lead to overheating and hefty service call fees.

So far so good. Works great for my metal floor vents.. Sarah. Poolesville, MD. Mon Jul 13 2026

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

Elevate your home decor with our exquisite, hand-woven decorative wire grilles, crafted from custom-crimped steel wires to enhance cabinet doors, bookcases, and more with timeless sophistication. Each grille is meticulously electroplated and finished with a Clear Lacquer, delivering a breathtaking antique finish look that accentuates a delicate, non-welded designs for an unparalleled, luxurious beauty. Perfect for indoor use, these grilles add elegance to kitchen cabinets, entertainment units, or wine cellars and can be easily cleaned with non-ammonia-based products for lasting beauty.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

The CleanVent speaker pattern Refer to how to measure guide below to find your vent sizing. The ceiling vent is one of the most overlooked details in a room: the CleanVent sits flat to the ceiling making it part of the ceiling not an obstruction. The CleanVent brings a hint of design to your ceiling, eliminating the cluttered look of vents protruding into a flat ceiling. The CleanVent is a magnetic, screw-less, retrofit vent cover: featuring hidden air flow tabs. It is easily repositioned when installed, which can fix the problem of improper installed, crooked or misaligned vents. The CleanVent attaches via magnets screwed into the vent box itself, pulling the vent box tight to the ceiling which can eliminate vent sweating. Easily removed for cleaning and painting. Each CleanVent is manufactured in the USA out of .040 5052-H32 aluminum, (not plastic). The CleanVent and defusing screen are powder-coated in gloss white and can be painted. The Inner air flow tabs are .040 stainless steel and can be positioned in any direction. Please note the CleanVent sizes are for inside vent measurements, the overall size of the CleanVent is 1-1/2 inches bigger on all 4 sides for the frame around the vent opening. Example a 6 x 6 vent overall size is 9 x 9, which gives plenty of room for covering up ceiling stains and crooked installed vents.

Just used for our recently master bath remodel - love it! Love that it’s magnetic - makes it easy to make off an clean! (Dust) Really heavy duty and quality materials.. Kristie. San Antonio, TX. Sun Mar 26 2023

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

These hard-to-find unique baseboard registers will be a beautiful accent to any home. Perfect for updating an older home to a more modern finish and style. The swing-open damper opens into the ductwork, to insure great airflow into any room and closes completely so you can decide to heat or cool a room. A top projection of 1' and a bottom projection of 2.5" works well for replacing several older homes' current vents.

Really nice an exact replica fits perfectly. Carl. US. Sat Nov 18 2023

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

Upgrade your home's air quality and system efficiency with this premium White Return Air Filter Grille. Designed to fit a precise 20" x 20" duct opening, this heavy-duty steel vent cover features a sleek louvered design that maximizes airflow while minimizing noise. The convenient flip-open door allows for effortless filter changes without removing the entire frame, making maintenance a breeze. Whether you are renovating or simply replacing an old register, this rust-resistant grille offers a perfect blend of durability and style for any modern HVAC installation.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

The CleanVent ellispe pattern Refer to how to measure guide below to find your vent sizing. The ceiling vent is one of the most overlooked details in a room: the CleanVent sits flat to the ceiling making it part of the ceiling not an obstruction. The CleanVent brings a hint of design to your ceiling, eliminating the cluttered look of vents protruding into a flat ceiling. The CleanVent is a magnetic, screw-less, retrofit vent cover: featuring hidden air flow tabs. It is easily repositioned when installed, which can fix the problem of improper installed, crooked or misaligned vents. The CleanVent attaches via magnets screwed into the vent box itself, pulling the vent box tight to the ceiling which can eliminate vent sweating. Easily removed for cleaning and painting. Each CleanVent is manufactured in the USA out of .040 5052-H32 aluminum, (not plastic). The CleanVent and defusing screen are powder-coated in gloss white and can be painted. The Inner air flow tabs are .040 stainless steel and can be positioned in any direction. Please note the CleanVent sizes are for inside vent measurements, the overall size of the CleanVent is 1-1/2 inches bigger on all 4 sides for the frame around the vent opening. Example a 6 x 6 vent overall size is 9 x 9, which gives plenty of room for covering up ceiling stains and crooked installed vents.

Debbi. Deltona, FL. Tue May 21 2024

The Steel Crest Distinction: This beautiful designer baseboard supply register, with air-volume damper, is made from solid, white powder-coated, rust-resistant galvanized steel and is designed for timeless beauty and un-paralleled efficiency for your heating and cooling system.

Super cute and easy installation. The fit wasn't perfect but can be fixed up a bit to match the old vents.. Kara. Seattle, WA. Sun Sep 26 2021

The SteelCrest Distinction: This beautiful designer fixed return grille is made from solid, oil rubbed bronze powder-coated, rust-resistant galvanized steel and is designed for timeless beauty and unparalleled efficiency for your heating and cooling system.

Needed this for a 1912 craftsman home floor vent. Heavy duty, well made and just beautiful.. Anonymous. Wed Jan 26 2022

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

The SteelCrest Distinction: This beautiful designer fixed return grille is made from solid, white powder coated, rust-resistant galvanized steel and is designed for timeless beauty and un-paralleled efficiency for your heating and cooling system.

Looks great in my living room, fits perfectly as described. Mindy. Morgantown, WV. Mon Jul 08 2024