2 In X 12 In X 8 Ft 2 Premium Grade Fir Dimensional Lumber Unbranded 300193

Model NEV-431-RO-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 32 in. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real Red Oak veneer. Each sheet covers approximately 10.67 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 3 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 1 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-431-RO-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 7.67 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-483-1-PP is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 8 ft. half round wood tambour wall panel crafted from solid paintable-grade Pine. Each sheet covers approximately 8 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to an 8 in. minimum radius. The half round profile stands 3/8 in. proud of the backer with 1 in. wide slats and 12 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to take paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-483-1-PP for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 10 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-373-RO is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 8 ft. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Red Oak. Each sheet covers approximately 8 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-RO for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 7 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NEV-331-MP-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 32 in. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real Maple veneer. Each sheet covers approximately 10.67 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 2 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 0.75 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-331-MP-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 7.33 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-311-PP is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 8 ft. fluted pencil wood tambour wall panel crafted from solid North American furniture-grade Paintable Pine. Each sheet covers approximately 8 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to an 8 in. minimum radius. The fluted pencil profile stands 3/8 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-311-PP for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 9 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-383-WAL-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 32 in. half round wood tambour wall panel crafted from solid North American furniture-grade Walnut. Each sheet covers approximately 2.67 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 4 in. minimum radius. The half round profile stands 3/8 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-383-WAL-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 3.35 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NEV-331-WO-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 32 in. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real White Oak veneer. Each sheet covers approximately 10.67 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 2 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 0.75 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-331-WO-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 6.67 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-373-WAL is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 8 ft. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Walnut. Each sheet covers approximately 8 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-WAL for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 10 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-373-WAL-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 32 in. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Walnut. Each sheet covers approximately 2.67 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-WAL-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 3.35 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-373-MP-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 32 in. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Maple. Each sheet covers approximately 2.67 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-MP-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 2.35 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-383-WAL is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 8 ft. half round wood tambour wall panel crafted from solid North American furniture-grade Walnut. Each sheet covers approximately 8 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 4 in. minimum radius. The half round profile stands 3/8 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-383-WAL for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 10 lbs. per sheet, it is easy for one installer to handle and fast to finish.

The Owndeign 94.5 in. x 12.6 in. 3D DIY acoustic wall paneling set includes 2-beautifully designed panels that bring both style and sound absorption to your space. Each panel features a striking design, crafted with engineered oak wood veneer over Eco-friendly MDF and backed with black polyester fiber. This SET effectively covers an area of 16.5 sq.ft., making it perfect for enhancing interior aesthetics in living rooms, studios, and workspaces.

Model NES-483-1-WAL-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 32 in. half round wood tambour wall panel crafted from solid North American furniture-grade Walnut. Each sheet covers approximately 2.67 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to an 8 in. minimum radius. The half round profile stands 3/8 in. proud of the backer with 1 in. wide slats and 12 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-483-1-WAL-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 3.35 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Stacy. Dana Point, CA. Sat, 03 Oct 2026

Model NES-383-RO-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 32 in. half round wood tambour wall panel crafted from solid North American furniture-grade Red Oak. Each sheet covers approximately 2.67 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 4 in. minimum radius. The half round profile stands 3/8 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-383-RO-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 2.35 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-373-MP-4 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 4 ft. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Maple. Each sheet covers approximately 4 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-MP-4 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 3.5 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Introducing the Cortes Plus Deck board, showcasing a striking rustic wood grain on 1-side and our timeless cathedral wood grain on the other, perfect for any outdoor aesthetic. Available in 15 trusted colors, this board combines style with unparalleled durability. Capped on all 4-sides, it offers superior protection against the elements, ensuring your deck looks beautiful for years to come.

Quality composite that looks like real wood. Really heavy.. Lee-anne. San Marcos, CA. Sun, 05 Apr 2026

Model NES-311-WO-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 32 in. fluted pencil wood tambour wall panel crafted from solid North American furniture-grade White Oak. Each sheet covers approximately 2.67 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to an 8 in. minimum radius. The fluted pencil profile stands 3/8 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-311-WO-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 3 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Introducing the Magellan Plus Deck board, showcasing a striking rustic wood grain on one side and our timeless cathedral wood grain on the other, perfect for any outdoor aesthetic. Available in 15 trusted colors, this board combines style with unparalleled durability. Capped on all four sides, it offers superior protection against the elements, ensuring your deck looks beautiful for years to come.

Model NES-483-1-WAL-4 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 4 ft. half round wood tambour wall panel crafted from solid North American furniture-grade Walnut. Each sheet covers approximately 4 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to an 8 in. minimum radius. The half round profile stands 3/8 in. proud of the backer with 1 in. wide slats and 12 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-483-1-WAL-4 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 5 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Transform exterior walls into a modern architectural feature with these 106-inch exterior slat wall panels. The dimensional linear profile creates the sophisticated look of contemporary wood slat siding while adding depth, shadow, and visual interest to house facades, patios, entryways, balconies, outdoor kitchens, and commercial spaces. Designed for demanding outdoor applications, the durable composite construction provides the appearance of wood without the extensive upkeep associated with traditional lumber. The panels are weather-resistant, waterproof, and UV-resistant, helping them withstand moisture, sunlight, and changing outdoor conditions while maintaining a refined appearance over time. The streamlined panel design allows multiple pieces to create a clean, continuous wall treatment suitable for both small accent areas and larger exterior renovations. With no routine painting, staining, or sealing required, these low-maintenance composite wall panels offer an elevated solution for creating sleek, contemporary outdoor architecture.

I really love this siding! It is easy to install, cleans up quick, and dressed up our outdated deck area around the hot tub.. Rebecca. Columbus, OH. Sun, 04 Oct 2026

Turn plain surfaces into custom architectural features with this flexible fluted semi-circle wood wall panels. The raised 3D profile adds depth, rhythm, and shadow to interior spaces, making it a strong choice for accent walls, TV wall backdrops, kitchen island fronts, bar bases, columns, fireplace surrounds, reception desks, and furniture upgrades. Its flexible format supports both flat and curved applications, giving DIYers, contractors, and designers more freedom to wrap, cover, and finish surfaces with a built-in designer look.

Meghan. Mon, 02 Nov 2026

Model NES-383-WAL-4 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 4 ft. half round wood tambour wall panel crafted from solid North American furniture-grade Walnut. Each sheet covers approximately 4 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 4 in. minimum radius. The half round profile stands 3/8 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-383-WAL-4 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 5 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Love the look of a real stone wall but not the weight, mess or price that comes with it? These 3D faux stone wall panels give you the rich, stacked stone texture you see in mountain cabins and cozy lodges, without hiring a mason. Use them to frame a fireplace, dress up an entryway, add character to a kitchen wall or cover a whole living room feature wall. They work outside too, on a covered porch, patio or garden wall. Each 20" x 40" panel is made from lightweight, non-toxic high-density Styrofoam (EPS), so you can carry, cut and place it on your own. No grout, no special tools, no pro needed, which is why renters and weekend DIYers love them. Just trim the panels with a utility knife and stick them on with a high-tack, solvent-free montage adhesive, the kind of multi-surface construction glue made for EPS wall panels, for a strong, long-lasting hold. Going small? The Set of 2 covers about 11 sq ft, just right for a quick accent. Doing the whole wall? The Set of 9 covers about 48 sq ft. The panels resist moisture and help soften sound and temperature swings, so the room feels a little cozier and quieter. Want a different shade? Paint them with water-based paint; avoid solvent-based paints, sprays and adhesives, since they can damage the foam. If you’re installing outdoors, we recommend a coat of UV-resistant, water-based varnish to keep the color fresh and help the panels last for years. Keep the room well ventilated while you work; a mild new-product smell is normal and fades quickly. A quick note on heat: the panels look great on the wall around a fireplace, but keep them out of the firebox surround, away from stove pipes, and clear of open flames or direct heat sources like grills and heaters. Always follow the clearance your fireplace or stove manufacturer recommends. As with real stone, colors may vary slightly between batches and screens. Made in Türkiye.

We haven't put them on yet but will start installing them within the next 7 days. I am impressed with the way that they look, and I am anxious to see how they look installed. Service was fast and they come to our doorstep on time.. David. Belcourt, ND. Wed, 23 Sep 2026

Each Corbel is meticulously hand carved by skilled and experienced artisans who pay delicate attention to intricate detail, beauty and ornamentation. The design motifs are carefully hand carved in deep relief to achieve the highest standards of fine quality, embellishment and authenticity. Hand carved from furniture grade North American solid hardwoods. Used for wooden furniture cabinetry projects such as kitchens islands, decorative ornamentation under countertops overhangs, under oven range hoods above the stove. The use of Hand Carved Corbels has become an eye-catching to any kitchen. They are also widely used as a decorative ornament under shelving and as a stand-alone wall mounting to display any artistic display.

Add a decorative touch to your home's interior and help protect walls from the furniture with natural hardwood chair rail moldings. This dental chair rail molding has a classic elegance associated with it. The crisply cut dentil insert creates beautiful depth and shadowing and adds sophisticated architectural detail wherever this molding is installed. Deeply rooted in traditional architecture, this dentil molding is sure to transform your interior space. Consider pairing with dentil crown molding for a stunning effect.

Was a little scratched but fine. Painted it and used it on the stair detailing.. Ashley. New London, OH. Thu, 02 Jan 2025

The Rustic Collection brings the timeless charm of log-and-timber craftsmanship into modern homes. Designed with today's technology but inspired by centuries-old techniques, our rustic wood millwork features all the natural beauty and character that make each piece one-of-a-kind. Since we don't kiln-dry the wood, every bracket, corbel, rafter tail, and more will showcase the unique qualities of the wood species- meaning no two pieces are the same. Expect variations in color, grain, texture, knots, sapwood, heartwood, and even natural checking or cracks. These imperfections aren't flaws- they're what make the Rustic Collection truly special, offering a genuine, earthy look that adds undeniable character to your home. Break free from cookie-cutter designs and embrace the individuality and warmth that only real, natural wood can offer.

Ideal for a variety of projects, our cabinet columns add stunning dimension, texture, and individuality to match every decor style.  Manufactured with thoughtful design, each column post is available in the most common widths and heights to fulfill the needs of most applications. Our columns are hand-carved, sanded, and made from only the highest quality materials, for lasting beauty.  They can be easily stained or painted and simply install with L brackets or screws and adhesive. Give your space one-of-a-kind character and special touch that make it home.

Love the details in the wood work. Made an islandhigh counter top table.. Anonymous. US. Wed, 17 Jun 2026

Each Corbel is meticulously hand carved by skilled and experienced artisans who pay delicate attention to intricate detail, beauty and ornamentation. The design motifs are carefully hand carved in deep relief to achieve the highest standards of fine quality, embellishment and authenticity. Hand carved from furniture grade North American solid hardwoods. Used for wooden furniture cabinetry projects such as kitchens islands, decorative ornamentation under countertops overhangs, under oven range hoods above the stove. The use of Hand Carved Corbels has become an eye-catching to any kitchen. They are also widely used as a decorative ornament under shelving and as a stand-alone wall mounting to display any artistic display.