2 In Aluminum Sliding Door Binder Posts With Screw 4 Pack Primeline E 2055

Repair parts aerator 360º swivel aerator with brass dual thread water save dual function with plastic ball joint with flow control reach all corners of sind fits most faucets flow rate: 2. 0 gpm male/female adapter included white with chrome

Works perfectly. Pretty much shuts off the water when the tab is down (only a few drips). The full heads pops down to turn into a spray as well, which is just an added bonus to me! I just wish it came in a dark bronze color. (Hey Wayfair, I'll buy another one if you make it in a dark bronze!). Sal. Oregon. Fri Oct 06 2023

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Thu Jul 17 2025

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Wed Feb 01 2023

This bottom track is constructed from roll-formed steel and comes finished in champagne gold. The track can be used for new installs, or to replace missing or damaged bottom tracks of by-passing mirror doors that use convex edge mirror door roller assemblies. They feature a double-grooved track as used by a variety of mirror door manufacturers, and can easily be cut for custom installs. These replacement tracks are sold individually and the installation fasteners are not included.

It was the correct size and fit beautifully. Wheel’s on the closet door slide beautifully on the track Price was great and I love Wayfair Thank you. Carol. Thu May 15 2025

Prime-Line D 1579-C Sliding Door Repair Track is designed to restore smooth operation to worn or damaged sliding track systems on aluminum doors. This replacement door track cap slips over existing damaged tracks, providing a simple and effective solution to prolong the life of your sliding door. Built to last, the patio track is made of high-quality stainless steel for maximum durability and rust resistance, ensuring long-term performance. Simply prep the existing door tracks, apply a thin bead of silicone glue, and snap the repair track into place using a rubber mallet and block of wood for a secure fit. Each replacement sliding track measures 3/16 inch x 48 inch x 1/4 inch and comes in a convenient 2-pack. For further dimensional information, please see the line drawing before purchasing.

Fit perfectly!. Gordon. Sun Apr 12 2026

This Prime-Line Adjustable Sliding Door Lock features a telescopic design that allows it to adjust to fit nearly all standard patio door openings. The lock bar is adjustable to accommodate openings from 28 inch to 48 inch Secure your door in an open position, so you can safely allow fresh air into your home. When not in use, simply swing the metal security bar up and out of the way. Unlike typical patio door patio door lock bar, this door lock stick does not require you to cut the unit down to size with a saw. You simply press in the tension release clip to extend the length or reduce the length. Constructed of aluminum with an aluminum finish, the patio safety bar prevents doors from being forced open. Please refer to the line art drawing for dimensions and compare to your needs before purchasing.

Perfect for securing my sliding glass door. Glad I found it.. Carolyn. Louisville, KY. Sat Feb 21 2026

This is a steel binder post and screw set used for attaching handles to sliding patio door rails and sliding screen door rails. They fit 1-3/4 inch to 2 inch wide rails and have a low profile design for a less intrusive look. Each package contains 2 screws and 2 posts. The screw is 2 inch in length and the post is 1/2 inch to install these, 2 Phillips head screwdrivers will be required.

This barrel nut and bolt set is constructed of steel and comes in a zinc-plated finish. Sets like these are commonly known as sex bolts in the hardware industry, as well as Chicago bolts. This barrel nut (sex bolt) features a long female threaded shaft (inside), which fastens with the mating screw's outside thread. Barrel nuts and bolts like these are used where through-bolting applications are desired with a head on both sides of the materials being joined. Sets like these can be used for mounting hydraulic door closers on doors from 1-3/8 inch to 1-3/4 inch thick.

These replacement hardware packs are for use when installing or repairing Prime-Line part MP4013 security bar locks, for patio sliding door security. All fasteners, brackets and miscellaneous installation hardware are included with this item. See manufacturer’s how-to video for detailed instructions, including how to install when the active panel slides on the exterior side of the home.

Works as advertised, definitely secures bar.. Carlos. Succasunna, NJ. Tue Jul 26 2022

Prime-Line MP1583 Sliding Door Repair Track is designed to restore smooth operation to worn or damaged sliding track systems on aluminum doors. This replacement door track cap slips over existing damaged tracks, providing a simple and effective solution to prolong the life of your sliding door. Built to last, the patio track is made of high-quality stainless steel for maximum durability and rust resistance, ensuring long-term performance. Simply prep the existing door tracks, apply a thin bead of silicone glue, and snap the repair track into place using a rubber mallet and block of wood for a secure fit. Each replacement sliding track measures 3/16 inch x 72 inch x 1/4 inch and comes in a convenient 2-pack. For further dimensional information, please see the line drawing before purchasing.

Anonymous. Mon Nov 03 2025

This is an extruded aluminum sliding doorkeeper. It is surface mounted for hook-style latches. The dimensions are 2-1/2 in. in length, with a 1-1/2 in. width. It is used by Viking doors.

Extruded aluminum inside pull with wood grain feature strip. Clamp-latch with metal activator. Flush extruded aluminum outside pull. Used by a variety of sliding glass door manufacturers. Latch hook profile is 1/2 In. with a projection is 1/2 In.

Perfect fit. Does the job. Afia. Fri May 15 2026

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

This bronze patio door handle is a surface with clamp latch style. Often found on older style patio doors, it is mounted on the door's inside frame and the clamp latch latches onto an extrusion (astragal) on the jamb. It has 1-13/16 in. handle height extruded aluminum inside handle. This clamp has a 3/16 in. profile but it is spring-loaded allowing 1/8 in. play in clamp profile height. The projection is 3/8 in.. The outside handle is a bronze low profile non-keyed handle. To key this unit order the Prime-Line part E 2071 lock cylinder.

I thought it no longer available anywhere. Only Wayfair has it. The item is exactly the same as the one replaced. I would have to order again as soon as the other old one is damaged. Shipping was fast and the item arrived undamaged with good packaging.. Anonymous. Sun May 04 2025

This unique patio door handle is used by Ador/HiLite doors. It has mill finish extruded inside and outside 6 in. handles. It is non-handed and will work on either right or left-handed doors. The spring-loaded hook pins twist in tandem to lock into the door jamb. No keeper required. Unit is non-keyed. Mounting holes are 3-7/8 in. on center. Minimum door width of 7/8 in. and maximum width of 1-1/8 in.

Has your sliding screen handle broken, is it worn out, cracked, damaged or just worn out? This lever is used on a variety of patio door manufacturer's sliding screen doors. It is a diecast metal lever with a nickel finish that features a 2-1/2 inch length and a 1-inch diameter mounting area. When installed properly it engages the internal hook or internal latch body. Order yours today and make your sliding screen door secure again.

The Prime-Line Sliding Glass Door Handle Set is soundly constructed to ensure its reliability and overall longevity. The non-keyed replacement sliding door handle mounts on the inside frame of an older style door and latches onto an extrusion on the jamb. Easily convert the slide door handle replacement into a keyed cylinder lock to increase the handles functionality and security features. Constructed from diecast extruded aluminum, the sliding door handle replacement comes finished in a stylish finish with woodgrain accents. The handle is the ideal choice for the discerning homeowner looking to enhance their doors style and flair. The handle is a 2 inch tall inside handle. The latch clamp of the handle set has a 1/4 inch profile and 1/2 inch projection when in locked position.

Great fit so glad to be able to fix my door!!!. Judy. Memphis, TN. Sat Mar 04 2023

This ADA compliant slide latch is constructed of stamped stainless steel and comes in a satin finish. It is a surface-mounted latch that is designed for use on 1 in. thick swing-in partition doors, and it comes complete with an "occupied" indicator and a matching stainless steel keeper. The exterior indicator has a dial-type internal mechanism that announces a locked door (or an occupied stall) with red color when the lock is engaged. When the slide lock is in the unlocked position, the dial indicator reveals a green color, or unoccupied state, announcing its availability for use. For access to the locked stall, the exterior indicator also comes equipped with a stainless steel pull and a slotted barrel nut which can disengage the lock from the exterior in the event of an emergency. This latch mounts over a durable, black plastic base with its mounting holes spaced apart at 1-3/8 inches, and it features a 1-3/16 in. bolt throw. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

This mill finish patio door handle is a surface with hook latch style. Often found on older patio doors, it mounts on the door's inside frame and the hook latch catches the keeper mounted on the jamb. It has a 1-1/8 inch high extruded aluminum inside handle with an anti-lift feature on the hook latch. Latch profile is 3/8 inch. The mounting holes are 4-15/16 inch on center.

This is a sliding door diecast lock housing with steel hook and latch lever. It features a black plastic latch lever tip, with latch retainer, 3 in. long, 15/16 in. deep.

This lock is constructed from diecast and comes in a painted aluminum color. The 1-1/2 in. throw bolt may be manually or key locked. Helps to prevent forced entry and may be locked in ventilating position. Can be used on patio doors, sheds, and utility doors to help prevent a forced entry. May also be mounted in a ventilating position and keep the door secure.

Works really well. We have used them all over the house over the years. One caveat: it may happen that the spring gets misaligned, which makes it hard to close the lock without manually adjusting the spring. I believe this is a rare occurrence of a manufacturing fault, not a general design flaw. Over all, this is an excellent lock for sliding doors.. Anonymous. Fri May 08 2026

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

The Prime-Line C 1201 Sliding Patio Door Handle is a non-keyed slide door handle replacement. It is non-handed for use on left or right sliding patio doors. The clamping mechanism on the sliding door handle replacement features a unique extruded aluminum saw-tooth style clamp that engages automatically when the slide door handle is in the locked position, and the door is slid closed. This sliding glass door handle consists of an extruded aluminum inside pull and a diecast constructed outside pull, both in a black- painted finish. The inside pull of the Prime-Line door handle features a decorative wood grain strip and the outside pull sits flush inside the framework of the sliding door panel. The door handle hook has mounting holes 3 inch on center. The clamp style sliding door handle includes mounting hardware. A Phillips head screwdriver is required for installation. Please refer to the line art drawing for dimensions and compare with your needs before purchasing.

Perfect size and it is what i was looking for. Kitae. Bakersfield, CA. Sat Apr 01 2023

If your sliding glass door handle is old, damaged or missing, don’t get a brand new door – just replace the door handle! This non-keyed Sliding Glass Door Handle Set makes the DIY project a breeze. Installation is quick and easy, all fasteners necessary are included, and the set is non-handed, allowing it to be used on both left and right-handed patio sliding doors. It is a clamp style with a surface mount and fits 4-15/16 inch hole spacing. The handle set fits on doors measuring 1 to 1-1/2 inch thick. If mounting on thicker doors, longer screws need to be purchased separately. The door handle set is constructed of diecast materials with a painted black finish, perfect for your black sliding door. Installation is quick and easy! Instructions and all fasteners necessary for the installation of this sliding door handle set are included in packaging. Due to the surface mounting, no mortising is required. The outside non-keyed pull is different in shape than the inside pull, and it can be changed to a locking outside pull using Prime-Line’s model numbers E 2000 or C 1120 (purchase separately). *Product Selection Tip: Besides matching the style and type of locking mechanism, the other main specification to match is the measurement of the mounting hole centers, from center-2-center.

It was perfect and super easy to install on my own. The old lock had broken so I just needed a replacement for my old sliding glass door.. Anonymous. Wed Sep 20 2023

These bi-fold door guide caps are constructed of plastic and come 25 per pack. These replacement caps slide onto the tops of bi-fold guide rods to allow for smooth operation of doors. Use these caps to replace any worn or missing caps of matching dimensions to repair any poor, or rough-operating bi-fold doors. These caps are easy to install and used by many.

This sliding patio door handle set is designed as a direct replacement for broken or worn flush-mounted, hook style door handles. Constructed with a mix of durable diecast components and a natural wood inside pull, the set combines strength, style, and functionality. The exterior locking pull features a chrome finish, while the interior supports are finished in chrome for a modern look. The inside pull showcases a clear-finished wood handle, adding a touch of warmth to your sliding door. This non-handed handle set fits both left- and right-handed sliding doors and installs easily on doors 1 inch to 1-1/8 inch thick with 6-5/8 inch hole center spacing. It comes complete with a keyed exterior lock, two keys, four interchangeable hook lengths (3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch), and a 2-11/16 inch keeper that mounts to the jamb. All fasteners and installation instructions are included, making it a convenient replacement solution. For proper selection, confirm the style, lock type, and center-to-center hole measurements match your existing hardware.

Good quality product which exactly fix.. Doug. Hernando, FL. Sat Jul 26 2025

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

This is a heavy-duty pneumatic storm door closer for heavy weight wood or aluminum outswinging doors. It has a 1-1/2 in. barrel that is 10-3/8 in. long in a white finish. It comes complete with mounting brackets and attaching hardware. It has adjustable closing speed.

These Prime-Line F 2749 Spring-loaded tilt latches are constructed of plastic and they are white in color. They feature a screwless, snap-in install and require a milled slot to mount onto top horizontal rails of sash. The width of these latches measures 2-3/4 inch and the depth is 11/16 inch x 3/8 inch thick. These tilt latches are used on single and double hung vertical sliding sash panels designed to tilt-in and down from the top for cleaning purposes. Each package includes one right-hand and one left-hand latch. These tilt latches are simple to install and are used by a variety of window manufacturers.

It was very easy and fast. Anonymous. Thu Oct 03 2024

This chain door lock is constructed of stamped steel and comes in a select plated finish. It features a welded steel chain with all fasteners necessary for complete installation. This chain door lock can be used on a variety of door types. The smaller chain-holder base plate can be mounted on, or beside the door's casing, as it measures only 3/4 in. wide, by 2-3/8 in. tall, and the wider chain lock keeper measures 3-5/16 in. long with a height of 1-3/8 in. This chain door guard also works great as a child-safe security device which can help prevent little ones from fully opening doors and entering or exiting into dangerous and off-limit areas. This security door lock is easy to install and used by many.

Wonderful product. Will buy it again. Thank you, Wayfair!. Adam. Evanston, IL. Sat Jun 01 2024

This is a sliding patio door keeper. It is made of heavy gauge stamped steel that is zinc plated, with 3/4 in. mounting holes on center. The vertical slots to allow easy adjustment. Also features a 3/8 in. hook offset.

The Prime-Line U 117558 3 inch sliding barrel bolt is designed to deliver superior security and privacy protection for your home and property. Whether you need extra protection for bedrooms, bathrooms, sheds, gates, locker rooms, or storage areas, this barrel bolt latch ensures your doors stay firmly secured against unwanted entry. Crafted from thickened steel with a stylish matte black finish, the Prime-Line slide lock offers excellent resistance to corrosion, wear, and impact, providing long-term reliability both indoors and outdoors. The 360° flexible installation design allows for vertical, horizontal, or even downward mounting, making it a versatile choice for doors, windows, fences, kennels, cabinets, and more. Whether you're reinforcing an interior room or adding security to an outdoor shed, this lock adapts easily to your installation needs. With its streamlined, precision-crafted appearance and smooth locking action, it fits a wide range of residential and commercial applications. The Prime-Line barrel bolt offers enhanced durability and reliable performance over time. It is engineered for homeowners, DIY enthusiasts, and professionals who need a strong, dependable lock that maintains its performance in various environments. Customer satisfaction is our priority — the sliding barrel bolt is backed by premium support to assist you with any questions or concerns. NOTE: Please review the product dimensions carefully to ensure it fits your intended installation space before purchasing.

This door guide is constructed from nylon. It features an adjustable bottom mount design. It fits on doors that are 3/4 in. to 1-3/8 in. thick.

These guides are constructed from nylon and mount to the bottom of your door rails. Use one pair for a single door of any thickness, or they can be installed in a series for multiple door applications. Comes complete with fasteners for a quick and easy.

Work as expected. Quick shipping.. Sara. Omaha, NE. Sat Mar 04 2023

Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This sliding screen door handle and latch is used by Bay Mills doors as well as other patio door manufacturers of Hat Section doors. The handle mounting holes are 3-1/2 inch on center. It contains a black plastic inside pull with a latch slide button and an outside pull. The steel latch slides up and down to engage the keeper Prime-Line part A 203 (not included). Order yours today and make your sliding screen door secure again.

This is a front and back roller for the wardrobe door. It has concave rollers. Used on older Kenna frame sliding closet or wardrobe doors.

Steady & Smooth Performance:This dual-track bypass door hardware system makes opening and closing closet doors easier and quieter while keeping your space clean and organized. With a sturdy structure and well-planned layout, it is built for reliable daily use—no complicated installation or ongoing maintenance required.

This handle is a black internal style latching patio door handle used by Acorn, as well as many other patio door manufacturers. The handle body is diecast steel with a wood handle attached. Mounting holes are 3-1/2 in. on center. There is a matching keyed outside handle. When the inside handle latch is installed into the door frame through an inside access hole, the connected lever is held in place by a flat spring as it operates the latch up and down to engage the keeper that is included.

Johali. US. Mon Jun 01 2026

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

This unique Prime-Line C 1139 Outside Replacement Sliding Door Handle Pull is the most versatile locking unit available. It adapts to a variety of handle sets. The slide door handle replacement accommodates 7 different hole spacing patterns from 2-11/16 inch to 6- 7/8 inch. The 3-15/16 inch hole spacing is designed for use with mortise lock installations using Adam Rite and W & F mortise locks. These holes are offset 1/8 inch from that of the locking cylinder hole. Constructed of diecast in a black finish, this door handle hook is strong, durable, and built to last. This sliding glass door handle set comes keyed with two keys. Please refer to the sliding door handle replacement line art drawing for dimensions and compare to your needs before purchasing.

This by-pass closet door repair kit includes four roller assemblies constructed of stamped steel brackets and plastic wheels. One pair of roller assemblies is for installation on the front sliding panels and have only a 1/4 in. offset. The other pair is for the sliding closet door panel that hangs on the rear track. The roller assemblies of this second pair have 3/4 in. offsets.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. single cylinder deadlock in a white painted finish.

perfect to upgrade the bifold doors I purchased.. Heather. Hendersonville, NC. Thu Dec 28 2023

"The Prime-Line C 1253 Sliding Patio Door Handle is a non-keyed slide door handle replacement. It is reversible for use on left or right sliding patio doors. Use the sliding door handle replacement to replace or upgrade the slide door handle on a variety of patio doors. The door handle hook has a diecast inside and outside pull. The hook latch is constructed of steel. The sliding glass door handle set has mounting holes 4-15/16 inch on center. The hook and handle fits 1-1/4 inch to 1-3/8 inch thick doors. Mounting hardware included. A Phillips head screwdriver is required for installation. Please refer to the line art and compare to your needs before purchasing.

It looks way better then our old handle.. Anonymous. South Carolina. Tue Apr 19 2022

Restore the security and function of your sliding patio door with the Prime-Line E 2013 Mortise Lock. Designed as a reliable replacement for worn or damaged mortise locks, this component allows you to fix your door without the need for a full replacement—saving time and money while improving performance. This mortise lock features an adjustable, spring-loaded hook latch that provides secure engagement, helping keep your sliding door firmly closed. It is compatible with surface-mounted handle sets that use a vertical keyway position when locked and is suitable for sliding doors constructed of wood, aluminum, or vinyl. It also fits doors equipped with W&F manufactured handles, making it a versatile repair solution for many common door systems. Constructed with a durable steel housing and faceplate, this lock is built for long-lasting strength and dependable daily use. The precision design ensures smooth operation and consistent locking performance over time. With 3-11/16 inch mounting hole centers, this mortise lock is designed to fit specific door configurations. For best results, remove your existing lock and compare key dimensions, including hole spacing, faceplate shape, keyway position, and housing corner style before purchasing. Whether you're repairing a malfunctioning door or upgrading worn hardware, this mortise lock offers a cost-effective and efficient solution. Refer to the line drawing and manufacturer resources to ensure proper fit and installation.

This is a 7/16 in. white plastic housing with steel roller. It features a center-grooved roller. Typically used by Krestmark.

Worked perfectly for our window. Nancy. US. Sat May 30 2026

These Truth Hardware Sash Locks by Prime-Line Products are constructed of high pressure, corrosive resistant, diecast zinc and they come in a bronze baked-enamel finish. A concealed locking mechanism pulls rails together helping to reduce air infiltration. The mounting holes are spaced apart evenly, and they feature backset holes. The alignment lugs prevent side shift of the sash, and the slim-line design for narrow rail application With a lower profile it allows maximum sash opening. These locks are easy to install and used by many.

This is a side mount, top hung, adjustable wardrobe door roller assembly with a single 7/8 inch convex nylon wheel for the back door panel. The stamped steel bracket assembly is adjustable and has a 1/2 inch offset. It fits 3/4 inch to 1-3/8 inch thick doors. Used on Atlas closet door systems. For the front door panel use Prime-Line part N 6667.

This by-pass closet door repair kit includes four tandem roller assemblies constructed of stamped steel brackets and plastic wheels. One pair of tandem roller assemblies is for installation on the front sliding panels and have only a 1/4 in. offset. The other pair is for the sliding closet door panel that hangs on the rear track. The roller assemblies of this second pair have 1/2 inch offsets. Each roller assembly features 7/8 inch diameter wheels. The wheels have convex (round) edges and all are top hung, side-mount design. These roller assemblies are used on Acme and Stanley doors, in addition to many others.