1 In Heavy Duty Extruded Aluminum Sliding Window Lock 4 Pack Primeline Mp4000

1/4 in

This is a shower door bottom seal that is constructed of clear vinyl and comes in 36 in. lengths. Designed to attach to the bottom of frameless, swinging shower doors without the need of adhesives. Cutting down to size will be necessary if your shower door measures less than 36 in. in width. No tools are required to install this shower door bottom. For an alternate design, please review the Prime-Line.

what I needed, Solved my problem, I need receipts for the items that I purchased where can I go on line to print them out Thank You. Daniel. Martinez, CA. Sat Feb 21 2026

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

It does the job. It is kind of heavy, but it is effective.. Tiffany. Cocoa, FL. Wed May 28 2025

These replacement hardware packs are for use when installing or repairing Prime-Line part MP4013 security bar locks, for patio sliding door security. All fasteners, brackets and miscellaneous installation hardware are included with this item. See manufacturer’s how-to video for detailed instructions, including how to install when the active panel slides on the exterior side of the home.

Works as advertised, definitely secures bar.. Carlos. Succasunna, NJ. Mon Jul 25 2022

This patio sliding screen door grille is constructed of aluminum and comes in a white painted finish. The grille is designed to install on the exterior side of 48 in. Wide sliding screen doors to provide child safety, and protect the screen fabric from pet damage. This screen door grille measures 26 in. Tall, and with the fasteners and installation instructions provided it is simple to install. This maintenance-free grille is constructed of superior quality using close weave aluminum mesh supported by strong, extruded aluminum frame material in an attractive styling.

High quality screen door grill. Had to trim mounting tabs on one side to allow the screen to fit into the frame recess.. Edward. Meadow Vista, CA. Sun Jun 22 2025

Black

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

This is a sliding window roller assembly made of extruded aluminum bracket with a flat edge steel ball bearing roller. These brackets are used on international imperial series 1200 windows and a variety of other window manufacturers.

Nickel

Enhance door security with this premium hotel door blocker, a trusted solution in the hospitality industry and beyond. Designed for in-swinging doors, this secondary lock prevents forced entry from the outside while allowing the door to open slightly for safe visitor identification. Commonly installed in hotels, motels, and commercial properties, it’s also ideal for homes, rentals, and offices seeking added security. Unlike traditional flip latches or chain locks, this blocker minimizes damage caused by slamming doors, preserving both door frames and hardware. Its durable satin chrome-plated finish delivers a professional, modern look that blends seamlessly with most décor styles. Easy to install with the included mounting hardware, this door blocker provides an effective upgrade to standard door locks without requiring specialized tools. Durable, stylish, and functional, it offers peace of mind for property owners and occupants alike.

Was my mistake. This item is not good for my door, but I give this item to my friend they can use it for there door.. Zoila. Jackson Heights, NY. Mon Mar 31 2025

Silver, 5.7" H x 3.75" W x 1.05" D

These chain door guards are constructed of steel chains, diecast housings, plates, and keepers, and they come in optional plated finishes. These locks engage by allowing the bolts to slide into the keyed mechanisms to lock. They use B1 keyways, ILCO (1098M). These chain door locks allow doors to open only slightly for safe viewing and ventilation. Installation of these locks mounted out of children’s reach will help prevent them from opening doors to enter or exit into dangerous or off-limit areas. All installation fasteners are included, and the locks can be used on a variety of door types, on or beside the door casings.

Very nice looking and useful key system to setup child lock even if you are going out.. Anonymous. US. Wed May 17 2023

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

This sliding window pin lock is constructed of steel and comes in a chrome-plated finish. The shortest lock pin manufactured by Prime-Line Products, it is designed to fit on older style, metal framed windows; usually of single pane glass with very thin sash frame thicknesses. Features a holder where it can be stored when not in use, and a chain connecting the pin lock to the holder to avoid misplacement of pin. Window pin locks are designed to securely lock the sliding sash when in a closed or ventilating position, preventing the active panels from sliding on both horizontal and vertical sliding windows. Installation of this security device requires drilling into the sash frame with a 1/8 in. diameter drill bit, and caution should be used to avoid breaking glass with drill bit. Note: THIS WINDOW PIN LOCK IS DESIGNED TO FIT ON OLDER STYLE, METAL FRAMED WINDOWS – USUALLY OF SINGLE PANE GLASS WITH VERY THIN SASH FRAME THICKNESSES. Similar window pin locks of longer lengths include Prime-Line parts U 9858 (2-3/8 in. long) and U 11070 (2-3/4 in. long). Required tools for installation may include the following: Safety glasses, measuring tape, pencil, Phillips head screwdriver, drill, and a 1/16 in. and 1/8 in. drill bit. Installation instructions and fasteners are included with this item.

This flat-edged sliding window roller is constructed from steel. It comes affixed to nylon housing. This style roller is used on acorn series 2100 thru series 2300, new style windows.

This black patio door handle is a surface with hook latch style and is keyed. Often found on older style patio doors, it is mounted on the door's inside frame and the hook latch engages the keeper mounted on the jamb.

The thin bar that is connected to the locking cylinder snapped after using the lock two times. The lock now only locks from the inside and cannot be unlocked with the key. I would recommend another product that is a bit stronger and less likely to break so fast.. Bryan. Plano, TX. Fri Oct 04 2024

This sliding closet door bottom guide is constructed of plastic and comes white in color. Each bottom guide mounts with 2 fasteners and they are designed to accommodate 1-3/8 in. bypassing closet doors. This pack supplies 2 pairs of by-passing doors, or one 3-panel door system. The mounting holes of these floor guides are spaced apart at 4-3/16 in. from center to center, and they feature 1-1/8 in. tall supports. These bypassing sliding closet door bottom guides are easy to install and are used by a variety of closet door manufacturers.

Hi This is a good design for bi-fold doors with good spacing between doors. Ed. FL. Sat Jun 08 2024

Brass

Add an extra layer of security to your home with this Defender Security Door Reinforcement Lock. Designed to withstand 800 lbs. of force, you can rest easy knowing your family is safe and protected! This reinforcement lock has a spring-loaded design, aluminum construction and a bronze anodized finish. This reinforcement lock can be quickly and easily installed on any swing-in door of any thickness, and can help ensure the door cannot be opened from the outside by being kicked inch Additionally, it’s tamper-resistant, so it can protect against lock picking and bumping. Plus, it’s child-safe, because you can install it higher on a door, where your young ones can’t reach. Length is 2 to 0.19 inch. Width is 1 to 0.38 inch. Installation takes minutes, and this door reinforcement lock comes with 3 inch hardened screws. Extra home security and peace of mind are well within reach, and doesn’t have to come with the high price tag of an alarm system! Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner.

Havent used it yet but it seems very heavy duty.i think it will do just fine on the project I need it for. Good buy. Carla. Sun Jun 30 2024

This window security lock pin is constructed from steel and comes finished in aluminum. It features an 1/8 in. pin shaft. This lock pin will fit casement locking handles and narrow rail windows.

These Keyed Locking Hasps by Prime-Line Products are constructed of steel and diecast components, and they come in a chrome-plated, corrosion-resistant finish. The locking twist-knob does not require the key to engage the lock. In order to open the hasp, the twist-knob must be unlocked with one of the two keys that are provided with the lock. Use these key-locking hasps to prevent small children from accessing dangerous chemicals, tools or machinery. This keyed locking hasp is keyed different and use an ILCO 1098M keyway. Keyed-alike hasps are available by special order only. Purchasing these keyed locking hasps in multiples will help simplify the task of unlocking when used on multiple doors, cabinets, etc.

These roller assemblies are constructed of stamped steel housings and steel wheels. The housing features flared corners for better gripping power when inserted into the bottom rails of the sliding sash. The wheels feature concave (grooved) edges and are designed to glide over raised tracks. Roller assemblies like these are commonly used in showcase windows and display cabinets that are equipped with sliding glass or wood panels.

Product provided an exact replacement for my 70 year old windows. Should last longer than the nylon rollers included with the windows. Jeff. Pittsburgh Pa Metro. Mon Sep 08 2025

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a stainless steel housing and spring-loaded arm roller assembly, with a 1-1/4 Inch stainless steel ball bearing roller attached. Used by Bay-Mills as well as a variety of other patio door manufacturers. The spring-loaded roller arm is adjusted by the adjustment sleeve and screw on top. Order yours today and have your door slide like new.

This is a C-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The housing is 9/16 in. wide and 1-3/8 in. tall with a 3/4 in. dimple width. Used on Window Master patio doors. It replaces the original K-tab style that is no longer available.

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

This is an extruded aluminum sliding doorkeeper. It is surface mounted for hook-style latches. The dimensions are 2-1/2 in. in length, with a 1-1/2 in. width. It is used by Viking doors.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

0.87" H x 4.5" W x 4" D, Nickel

This Chain Door Guard Lock is a security locking device for doors, allowing a door to be slightly opened to allow safe viewing and ventilation. This door lock can also be installed out of reach of children so they cannot open the door by themselves, providing additional child-safe door security. Installation is quick and easy with fasteners included, providing added security for your home or office doors. This door guard is constructed of extruded brass with a 6 inch, 8-link welded steel chain. The 3-5/16 inch chain guard can be used on a variety of door types and can be placed over or beside door casing. It features a 6 inch long, 8-link welded steel chain and all installation fasteners necessary for complete install.

Looks great, works great. Definitely recommend!. Dan. Los Angeles, CA. Sat Feb 28 2026

Aluminum

These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a retaining ring to add strength at the insertion point when the lock is engaged. These patio door pin locks are designed to secure the sliding door in place when in a closed or ventilating position. These lock pins include all installation fasteners and they are simple to install.

This bronze patio door handle is a surface with clamp latch style. Often found on older style patio doors, it is mounted on the door's inside frame and the clamp latch latches onto an extrusion (astragal) on the jamb. It has 1-13/16 in. handle height extruded aluminum inside handle. This clamp has a 3/16 in. profile but it is spring-loaded allowing 1/8 in. play in clamp profile height. The projection is 3/8 in.. The outside handle is a bronze low profile non-keyed handle. To key this unit order the Prime-Line part E 2071 lock cylinder.

I thought it no longer available anywhere. Only Wayfair has it. The item is exactly the same as the one replaced. I would have to order again as soon as the other old one is damaged. Shipping was fast and the item arrived undamaged with good packaging.. Anonymous. Sat May 03 2025

This is a sliding window lock that is keyed and securely locks window in closed or ventilating position. Securely locks window in closed or ventilating position.

This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

This Chain Door Lock is constructed of steel components and comes in a beautiful, corrosion-resistant, classic bronze finish. Typically these are used on inswing doors that you may want extra security on. With this door guard properly installed you can safely and securely either vent the room or open your door slightly. All the necessary mounting hardware is included for a quick and easy installation. Additionally this can be used as a child safety lock if mounted high enough for your child to not be able to reach.

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

This Mill finish patio door handle is a surface with clamp latch style. Often found on older style patio doors, it is mounted on the door's inside frame and the clamp latch latches onto an extrusion (astragal) on the jamb. It has 1-13/16 inch handle height extruded aluminum inside handle. This clamp has a 3/16 inch profile but it is spring loaded allowing 1/8 inch play in clamp profile height. The projection is 3/8 inch. The outside handle is a Mill finish low profile non-keyed handle. To key this unit order the E 2070 lock cylinder.

This Truth Hardware Casement Window Sash Lock by Prime-Line Products is constructed of diecast zinc and comes in a bronze-painted finish. It is a left-handed lock and it features a low profile design to remain in-line with the thickness of the window's sidestop trim. The mounting holes are spaced apart at 2-3/8 inches, on center, and it comes complete with its keeper and installation fasteners. When the lever is activated, the locking cam engages the keeper, drawing the window tightly closed against the weather stripping. These locks have a stepped underside and are easy to install.

6.6" H x 3.75" W x 1.95" D, Chrome

This Defender Security Swing Bar Door Guard will increase peace of mind when answering the door by allowing the door to be cracked open slightly for viewing. When engaged, a ball on the keeper interlocks with the bar lock and prevents an intruder from pushing their way through. We have improved upon the standard door guard design and added an innovative backup thumb turn security lock that blocks the release tool from disengaging the door guard latch. In cases of emergency, hotel security or emergency crews can pop the thumb turn off of the unit by applying approximately 100 pounds of force to the door. (Note that 100 pounds of force is much greater than a simple kick in, so the emergency release feature does not compromise your security.) Additionally, after the thumb turn lock breaks away, the unit still operates as a traditional swing bar door lock and a specially designed Anti-Lockout emergency access tool is required to swing the door guard out of place. To help prevent forced entry into your home, it is always a good idea to engage the backup thumb turn lock whenever you are not actively using your door.

Great. Searched a long time and in many places to find this.. Donald. Owen Sound, ON. Tue May 10 2022

This is an F-tab patio door roller assembly with a 1 inch concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is then captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 inch wide and 1-3/16 inch tall with a 7/8 inch dimple width. Used by Lupton and a variety of other sliding patio door manufacturers.

This mill finish patio door handle is a surface with hook latch style. Often found on older patio doors, it mounts on the door's inside frame and the hook latch catches the keeper mounted on the jamb. It has a 1-1/8 inch high extruded aluminum inside handle with an anti-lift feature on the hook latch. Latch profile is 3/8 inch. The mounting holes are 4-15/16 inch on center.

This is a window roller, flat edge, sliding, suitable for use with Adore Hilite sliding windows. This flat nylon constructed roller is used on adore highlight sliding windows. Nylon axle pins also act as a side guide. Installs two per window.

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. It is a "K" tab patio door roller assembly with a 1-1/4 in. concave or grooved nylon ball bearing roller. The "K" tab style back end is a T shaped tab that is simply slid up into a similar T shaped receptacle in the bottom of the patio door. No screws are required. The housing is 5/8 in. wide and 1-3/16 in. tall with a flare and 3/4 in. dimple width. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Installation easy to install with a few simple tools. Refer to dimensional line drawing to match product specifications. This style roller is used on International and similar styled patio doors.

The Prime-Line C 1201 Sliding Patio Door Handle is a non-keyed slide door handle replacement. It is non-handed for use on left or right sliding patio doors. The clamping mechanism on the sliding door handle replacement features a unique extruded aluminum saw-tooth style clamp that engages automatically when the slide door handle is in the locked position, and the door is slid closed. This sliding glass door handle consists of an extruded aluminum inside pull and a diecast constructed outside pull, both in a black- painted finish. The inside pull of the Prime-Line door handle features a decorative wood grain strip and the outside pull sits flush inside the framework of the sliding door panel. The door handle hook has mounting holes 3 inch on center. The clamp style sliding door handle includes mounting hardware. A Phillips head screwdriver is required for installation. Please refer to the line art drawing for dimensions and compare with your needs before purchasing.

Perfect size and it is what i was looking for. Kitae. Bakersfield, CA. Fri Mar 31 2023

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

This sliding patio door keyed locking unit by Prime-Line Products is constructed of diecast and comes in a corrosion-resistant, white-painted finish. This locking device is designed to convert non-locking Prime-Line patio door handle sets (model number: C 1174, C 1176 and C 1178) to keyed locking handles. This lock features a 5-pin tumbler with 2 keys. The lock body is solid brass construction with a hardened break-away tailpiece. Use to replace damaged key cylinders in most surface mount handles.

This dual pull lever operator is constructed from die-cast and comes finished in bronze. A variety of manufacturers use this on their awning windows. This type of pull lever operator holds window open in any of five positions.

Upgrade your sliding doors with this back mount tandem roller assembly, designed for Andersen wood patio doors and compatible with many other wood door brands. Two 1-1/4 inch concave steel ball bearing rollers ensure smooth, quiet operation, while the stamped steel housing with side adjustment makes precise alignment simple. Top insert points and side locking tabs secure the assembly for long-lasting performance. Perfect for DIY homeowners or contractors, this durable roller assembly restores effortless sliding and improves door longevity. Installation is easy with a standard Phillips head screwdriver.

Anonymous. US. Fri Apr 11 2025

This is a black plastic housing sliding window roller assembly. It features a flat-edged plastic wheel with a 3/4 in. outside diameter, with stainless steel ball bearings.