1 In Screen Door Tension Spring With Roller Academy 2 Pack Primeline B 687

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a tension spring roller assembly, with a downward offset tension spring used by Academy and a variety of other sliding patio door manufacturers. The B 638 roller is a 1 Inch high-density polyethylene roller, the B 687 roller has a plastic ball bearing and the B 639 has a steel ball bearing roller with a 1-3/4 Inch long tension spring that is a heat treated steel spring. When installed the bent, or angled, flat spring positions the roller assembly so that an adjusting screw adjusts the height of the roller as needed. For stainless steel roller assembly use Prime-Line part B 756. Order yours today and have your door slide like new.

Anonymous. Wed May 07 2025

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This M-style tension spring roller assembly has a 1 Inch diameter steel ball bearing roller. The tension spring is 2-5/16 Inch long and heat treated and shaped like an M giving it the tension needed to allow the screen door to slide properly. It has a 1/8 inch locater pin that holds the roller assembly in a fixed position. Order yours today and have your door slide like new.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This roller assembly with M-shaped tension spring with a 1 Inch diameter nylon roller is used by a variety of patio door manufacturers. The heat treated tension spring is 2-5/16 Inch long and shaped like an M, giving it the tension needed by the screen door to slide properly. Easy to install. Order yours today and have your door slide like new.

This magnetic, self-adhesive door curtain is easy to install, even by one person. Simply attach the strip to the door frame. This door curtain uses a magnetic element to control the door's opening and closing, ensuring strong magnetic force and long-lasting durability. Available in different sizes to accommodate various door frames.

This is nice my Aunt like it, and the material is thick enough for her, except there wasn’t any lace on top as how it showed on photo.. Julia. Thu Aug 06 2026

This screen door tension spring is constructed from steel. It features an adjustable 1 in. ball bearing center groove wheel and is heat-treated. A variety of glass door manufacturers use this type of tension spring.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This rocker style spring tension roller assembly is used on International doors. It was used on International series 900, 925, 950 and newer. The body is extruded aluminum with a tension spring attached. It has a 1 Inch diameter steel ball bearing center grooved roller. Order yours today and have your door slide like new.

This item is a fiberglass screen repair kit for replacing damaged screen fabric in window screens and screen doors. Each kit contains one piece of charcoal fiberglass screen 36 in. x 84 in., 30 ft. of 0.180 in. black vinyl spline and a screen rolling tool. This kit will typically allow the repair of one screen door or two window screens.

It was good. Muhammad. Brooklyn, NY. Sun May 17 2026

These Handyman Single Loop Closed Extension Springs are constructed of durable spring steel, and they come finished in a beautiful, corrosive-resistant, nickel-plated finish. Springs like these are used for a variety of household and professional applications, and they feature a generous deflection length of 22 inch. These springs are easy to install and are used by many. The outside diameters, lengths and gauge thicknesses vary between each of these springs, while their dependability does not. Use these springs for repairs around the house, in the office, vehicle, garage and in many other applications.

This is a zinc-plated steel spring that offers positive tension adjustment for most storm and screen doors. All you have to do is turn the adjusting spring in or out of the mainspring to change the tension for a light or heavy door.

This molded plastic screen door grille allows for maximum screen coverage on standard 30 in. to 36 in. sliding screen doors. Proper installation of the grille adds strength to the entire door and helps prevent screen fabric damage. The molded plastic grille body measures 26-1/8 in. wide x 20 in. tall. The tabs extend 4-1/8 in. and can be easily trimmed.

works well. Anonymous. Sun Apr 05 2026

These heat-treated steel tension springs hold window screens into sliding aluminum window screen channels. Requires (2) 3/16 in. holes drilled 3-3/16 in. apart.

The Prime-Line K 5051 spring-loaded screen door catch is constructed from high-quality steel with a durable zinc-plated finish, ensuring long-lasting performance and secure closure. Featuring single roller arms, it keeps your screen door firmly shut, preventing unwanted openings caused by loose or worn latches and door closers. Designed for universal compatibility, this catch fits most hinged-swinging screen doors and accommodates various door and casing thicknesses for a versatile installation. Equipped with smooth, no-mar plastic rollers, it protects your door’s finish from scratches while delivering consistent latching and smooth operation. For precise fitting, please refer to the line art drawing to confirm dimensions before purchasing.

These window screen tension springs are constructed of heat treated spring steel and come in a zinc plated finish. Tension springs of this style mount onto the sides of aluminum screen frames and provide holding tension when inserted into sliding window screen channels. These tension springs will fit into 5/16 in. or thicker screen frame material. Requires two 3/16 in. holes drilled into the screen's edge for installation.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door roller assembly insert has an aluminum frame with a high density polyethylene inner housing and high density polyethylene roller. The assembly inserts into the bottom or top of the sliding screen door with the included screws. The roller housing adjusts up and down to the correct position needed. This style is often on Columbia sliding screen doors but is also used by very many other screen door manufacturers. Order yours today and have your door slide like new.

These storm door panel clips by make-2-fit are constructed of plastic and come clear in color. They feature a flush-fitting design and are used to retain glass and screen to storm door panels. The solid, low visibility, clear plastic construction of these clips help them to blend easier with finished surfaces. They come complete with fasteners for quick and easy installations. The clips have a 1/32 in. A tip that allows for secure attachment of storm windows and screen panels to storm door frame with a screw.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. These sliding screen door roller assemblies are constructed of stamped aluminum and include nylon wheels. The wheels feature concave (grooved) edges and have a 1 Inch diameter. Roller assemblies like these are used on sliding screen doors manufactured by Columbia doors, and many others. Order yours today and have your door slide like new.

Perfect fit and quick delivery:). Bernard. Ruidoso, NM. Fri Aug 15 2025

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This spring tension roller assembly is used by DorWal, Guardian as well as a variety of other sliding patio door manufacturers. It has a flat tension spring, steel housing and a 1-1/4 Inch high-density polyethylene roller. The roller installs into the door by snapping onto the existing diecast door frame corner. These can be used as top or bottom rollers. Order yours today and have your door slide like new.

These flush black plastic clips are used to secure window screens, storm windows, and storm door panels.

Margaret. US. Thu Apr 17 2025

The Prime-Line N 6847 pocket door roller assembly is compatible with a variety of bypass, bi-fold, and pocket closet doors, offering smooth and quiet operation for your sliding door needs. This roller assembly features a top-hung, center-mounted tricycle design with 3/4 inch flat rollers, ensuring seamless and long-lasting door movement. Built with a steel bracket and durable plastic rollers, this pocket door assembly provides reliable strength and quiet functionality for heavy-duty applications. The threaded rod easily installs into the bracket at the top of the door, making this closet door assembly quick and simple to set up with basic tools. Designed for 1-3/8 inch thick doors and tracks with a 1-1/8 inch inside width. For further dimensional information, please see the line drawing and compare it with your original item before purchasing.

Worked well to fix our pocket door. Pam. Belleville, ON. Thu Nov 19 2020

This screen door push bar is constructed of vinyl bars and plastic brackets and it comes white in color. Each bar is reinforced with steel bars that are concealed from view, and they can be cut down to fit doors of any width, up to 36 in. wide. This push bar can be mounted with the provided fasteners or double sided tape. It installs easily and it is used by many.

Study and easy to install with double stick tape. Exactly what I needed for my screen door.. Theresalynn. Oak Park, IL. Mon Jul 07 2025

Improve privacy in commercial and public restroom stalls with the Sentry Restroom Stall Door Privacy Cover. Designed to help block sightlines through large gaps between restroom partition doors and panels, this privacy strip system creates a more comfortable and secure restroom experience. Each cover combines a flexible black opaque vinyl strip that conceals gaps with a rigid clear vinyl mounting strip featuring a strong adhesive backing for quick installation without screws, fasteners, or drilling. The low-profile design blends with virtually any restroom partition color, material, or finish, making it an ideal solution for schools, offices, restaurants, retail stores, healthcare facilities, and other public restrooms. The privacy strips can be easily trimmed to fit unique installations and accommodate door hardware for a customized appearance. For best results, cut to size using tin snips or a coping saw. Each package includes two privacy strips measuring 2-1/8 in. W x 58 in. H, providing coverage for both sides of one restroom stall door. Durable vinyl construction and simple peel-and-stick installation make this an effective, low-maintenance privacy upgrade for existing restroom partitions.

This functional curtain rod set showcases a simple design that helps hang your curtains in your bedroom or living room. Arriving in a set of two, these rods feature an adjustable spring tension design that makes it easy to match the size of your window frames. Each piece is crafted from steel in your choice of color to complement a variety of color palettes. We also like that the non-slip, non-scratch rubber ends hold the rods in place while protecting the mounting surface from marks and scuffs. Plus, they do not require tools to install.

These are the true old-fashioned tension rods that are hard to find these days. They were perfect for my project.. Susan. Manhattan, KS. Fri Jul 31 2026

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is an Arcadia style roller assembly used by Arcadia doors as well as a variety of other sliding patio door manufacturers. This is also currently a very popular design amongst patio door manufacturers in today's market place. It has a wire tension spring and comes with a 1-3/8 Inch diameter steel roller and fits onto the Prime-Line part B 569 corner insert (sold separately). It is often used on the top as well as the bottom of the sliding screen door. Also look at Prime-Line parts B 515, B 610, B 714, B 736 and B 821 for similar spring tension rollers. Order yours today and have your door slide like new.

Used by H and D Industries. 4 top and 4 bottom clips.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This high-tension steel spring roller assembly fits onto the Columbia Uni-Fit series door. This roller assembly has a 1-inch diameter high-density polyethylene roller mounted in the housing. The flat steel spring end catches onto the inside of the door frame while the flat edges of the two tabs extending out in front of the roller restrict the roller from retracting too far up into the door frame as it rolls. This sliding screen door roller assembly insert has a thinner high-density polyethylene frame than the Prime-Line part B 646. It has an adjustable high-density polyethylene inner housing and high-density polyethylene roller. The assembly inserts into the bottom or top of the sliding screen door using the included screws. The roller adjusts to the correct position needed. This style is found on Columbia sliding screen doors but is also used by a variety of other sliding screen door manufacturers. Please note the dimensions and design when compared with an old roller. Order yours today and have your door slide like new.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a center grooved sliding screen door tension roller that is used by a variety of sliding patio door manufacturers. Used on the bottom as well as the top of the sliding screen door. The roller is a 1 Inch diameter high density polyethylene ball bearing roller. The tension spring is 2-1/2 Inch long and is a heat treated high tension steel spring. For the stainless steel use Prime-Line part B 573. Order yours today and have your door slide like new.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a center grooved sliding screen door tension roller that is used by a variety of sliding patio door manufacturers. Used on the bottom as well as the top of the sliding screen door. The roller is a 1 Inch diameter weather resistant stainless steel ball bearing roller. The tension spring is 3-1/4 Inch long and is a heat treated high tension steel spring. For the high density polyethylene use Prime-Line part B 523. Order yours today and have your door slide like new.

This is a white flush mounted handle and latch set used by many patio door manufacturers. It has a steel hook latch with 1 inch standard spacing. This handle set will fit a minimum door thickness of 15/16 inch and up to a maximum thickness of 1-1/8 inch. It is 5-11/16 inch long and 7/8 inch wide with 5-1/8 inch mounting holes. Made of diecast metal, the handles fit flush into the screen door frame with an inside automatic locking feature.

was easy to install.. Gerald. Sacramento, CA. Sat Jun 28 2025

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Easy to install with a few simple tools. This style roller is used on Revco-West and similar styled patio doors.

These shower curtain rod covers are constructed of plastic and come white in color. They feature a spring-like, self-adjusting diameter that is designed to wrap around a variety of shower curtain pole diameters. Covers like these are used to easily hide the unsightly wear of old curtain poles while offering a quick and clean repair. These rod covers can very easily be cut to match the length of the poles, they are simple to install, and they allow for easy sliding of shower curtain hangers.

Landlord painted the clothing rods in my closet, and the hangers wouldn’t slide. Popped this on, problem solved.. Lee. Los Angeles, CA. Wed Mar 11 2026

These window screen tension springs are constructed of heat treated spring steel and come in a zinc plated finish. Tension springs of this style mount into the corners of 45 degree cut aluminum screen frames and add holding tension when inserted into sliding window screen channels. These tension springs will fit into 5/16 inch or thicker screen frame material. No tools are required for these easy to install tension springs.

This is a 34-1/2 inch molded plastic screen door grille that allows for maximum screen coverage on standard 30 inch to 36 inch sliding screen door. Proper installation of grille adds strength to entire door and helps prevent screen fabric damage. Molded plastic grille body measures 26-1/8 inch wide x 20 inch tall. The tabs extend 4-1/8 inch and can be easily trimmed. Molded white plastic construction.

This has been perfect for keeping the screen porch door protected from dogs and kids. My husband is happy not to have to replace the screen all the time.. Amy Willauer. Kirkwood, NY. Fri Jun 26 2026

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is an Arcadia style roller assembly used by Arcadia doors as well as a variety of other sliding patio door manufacturers. This is also currently a very popular design amongst patio door manufacturers in today's market place. It has a wire tension spring and comes with a 1 Inch diameter high density polyethylene roller and fits onto the Prime-Line part B 569 corner insert (sold separately). It is often used on the top as well as the bottom of the sliding screen door. Also look at Prime-Line parts B 515, B 610, B 714, B 736 and B 821 for similar spring tension rollers. Order yours today and have your door slide like new.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a tension spring roller assembly with an offset, or bent, spring design used by Academy, Metal Industries and a variety of other patio door manufacturers. The roller is a 1 Inch diameter steel ball bearing roller with a tension spring that is a heat treated steel spring. The bent, or angled flat spring installs into the screen door frame so that the roller assembly cushions the door as it rides back and forth. For high density polyethylene rollers use Prime-Line part B 609. Order yours today and have your door slide like new.

These are window screen stretcher clips with screws are constructed from stamped aluminum. They fit most 3/8 inch x 3/4 inch frame applications. Often used to attach your window screens to awning and other types of windows.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a stainless steel housing and spring-loaded arm roller assembly, with a 1-1/4 Inch stainless steel ball bearing roller attached. Used by Bay-Mills as well as a variety of other patio door manufacturers. The spring-loaded roller arm is adjusted by the adjustment sleeve and screw on top. Order yours today and have your door slide like new.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a very popular sliding screen door corner used by Arcadia, Guardian and a variety of other sliding screen door manufacturers. It is diecast with an adjustment screw that would adjust the Prime-Line part B 515 style roller (sold separately) that has been installed onto the corner's roller pivot arms. The diecast corner fits into the sliding screen door frame holding the bottom or top rails and the side stiles together. Order yours today and have your door slide like new.

Protect your screen or storm door from damage with the Prime-Line Storm Door Protector Chain and Spring. Designed to prevent overextension, this protective device helps stop out-swinging doors from opening too far due to strong winds, sudden force, or everyday use. It’s an ideal solution for preserving the life of wood or metal screen and storm doors while maintaining smooth operation. The durable steel chain installs directly into the door jamb and works in combination with a heavy gauge spring wire to absorb shock and reduce impact. This cushioning effect helps minimize stress on hinges and door frames, preventing costly damage and extending the lifespan of your door. Engineered to fit most screen and storm door styles, this adjustable protector chain offers flexible installation for a wide range of applications. The corrosion-resistant zinc-plated finish provides added durability, helping the components stand up to daily wear and exposure to the elements. Installation is quick and easy, with all necessary mounting hardware included. Whether you're upgrading an existing door or adding protection to a new installation, this storm door chain and spring kit provides a simple, effective way to enhance durability and performance. Be sure to review the line drawing to confirm compatibility with your specific door setup.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door corner roller assembly is constructed of stamped steel and it includes a steel ball bearing roller attached to one end. The roller features a concave (grooved edge), and it is fully adjustable. This corner assembly is used by Metal Industries patio door manufacturer, and a variety of others. It measures 1 Inch in diameter and it is 9/32 Inch thick. The corner fits into the sliding screen door frame and holds the horizontal rails together with the vertical side stiles. Order yours today and have your door slide like new.

Nuk3y magnetic screen door is designed to make your life easier with long-lasting performance. Our magnetic screen doors are constructed with heavy-duty fiberglass mesh material. This will provide premium strength that is tear-resistant, more transparency, waterproof, and flame retardant. All hardware is included with instruction on how to install it. Available in a variety of sizes for different size doors.

I measured and purchased 3 screen doors…one double size door and two single doors with built in magnets and put them up by myself in a matter of minutes using Velcro and extra tacks (provided) in my beautiful Green House. No matter how many times I go In and Out of screen doors…it closes every time…I am very pleased with Products, Service and Delivery. Thank You Wayfair !. Millie. US. Thu Apr 09 2026

These are extruded aluminum clips used to attach storm windows or screen panels to storm door frames with aluminum knurled head thumbscrews.

These window screen hangers are constructed of stamped steel and they come in a zinc finish. They feature a top mount design with a distinct keeper, allowing for easy hanging and removal of wood-framed window screens. These hangers feature a 3/8 inch projection at 1 inch wide, and they are commonly used together with Prime-Line’s hook and eye latch (Prime-Line part K 5267, purchased separately), for latching of wood screens to wood window sills. All fasteners are provided for installation.

Satisfied. William. St Marthe, QC. Fri Jun 17 2022

This is a heavy-duty pneumatic storm door closer for heavy weight wood or aluminum outswinging doors. It has a 1-1/2 in. barrel that is 10-3/8 in. long in a white finish. It comes complete with mounting brackets and attaching hardware. It has adjustable closing speed.

These are extruded aluminum clips used to attach storm windows or screen panels to storm door frames with aluminum knurled head thumbscrews.

Install new window or door screen with ease with this screen rolling tool from Prime-Line. The strong and sturdy tool is a must-have for installing the screen fabric and vinyl spline into a screen frame. It is perfect for large and small screen repair jobs and works with most screening materials. With a plastic handle and plastic convex and concave roller wheels, the screen rolling tool is highly durable. The plastic wheels stand up to abrasion from screen materials, and the smooth plastic handle is comfortable and easy to hold. The combination screen rolling tool has a 1-5/16 in. x 3/32 in. convex steel roller at one end and a 1-5/16 in. x 3/32 in. concave steel roller at the other. It is designed to be used with vinyl screen spline sizes from 0.115 in. up to 0.165 in. Don’t risk tearing or putting a hole in the screen because you don’t have the right tool. Using the correct size Screen Rolling Tool makes the installation job easy and stress-free.

Upgrade your sliding doors with this back mount tandem roller assembly, designed for Andersen wood patio doors and compatible with many other wood door brands. Two 1-1/4 inch concave steel ball bearing rollers ensure smooth, quiet operation, while the stamped steel housing with side adjustment makes precise alignment simple. Top insert points and side locking tabs secure the assembly for long-lasting performance. Perfect for DIY homeowners or contractors, this durable roller assembly restores effortless sliding and improves door longevity. Installation is easy with a standard Phillips head screwdriver.

Anonymous. US. Sat Apr 12 2025

These window screen tension springs are constructed of heat treated spring steel and come in a zinc plated finish. Tension springs of this style mount onto the sides of aluminum screen frames and provide holding tension when inserted into sliding window screen channels. These tension springs will fit into 5/16 inch or thicker screen frame material. Requires two 3/16 inch holes drilled into the screen's edge for installation.

These are plastic clips used to secure window screens, storm windows, and storm door panels. Accepts a #10 screw.