1 In Screen Door Tension Spring With Roller Academy 2 Pack Primeline B 638

This magnetic, self-adhesive door curtain is easy to install, even by one person. Simply attach the strip to the door frame. This door curtain uses a magnetic element to control the door's opening and closing, ensuring strong magnetic force and long-lasting durability. Available in different sizes to accommodate various door frames.

This is nice my Aunt like it, and the material is thick enough for her, except there wasn’t any lace on top as how it showed on photo.. Julia. Thu Aug 06 2026

This item is a fiberglass screen repair kit for replacing damaged screen fabric in window screens and screen doors. Each kit contains one piece of charcoal fiberglass screen 36 in. x 84 in., 30 ft. of 0.180 in. black vinyl spline and a screen rolling tool. This kit will typically allow the repair of one screen door or two window screens.

It was good. Muhammad. Brooklyn, NY. Sun May 17 2026

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a center grooved sliding screen door tension roller that is used by a variety of sliding patio door manufacturers. Used on the bottom as well as the top of the sliding screen door. The roller is a 1 Inch diameter high density polyethylene ball bearing roller. The tension spring is 3-1/4 Inch long and is a heat treated high tension steel spring. For the stainless steel use Prime-Line part B 754. Order yours today and have your door slide like new.

This screen door tension spring is constructed from steel. It features an adjustable 1 in. ball bearing center groove wheel and is heat-treated. A variety of glass door manufacturers use this type of tension spring.

This molded plastic screen door grille allows for maximum screen coverage on standard 30 in. to 36 in. sliding screen doors. Proper installation of the grille adds strength to the entire door and helps prevent screen fabric damage. The molded plastic grille body measures 26-1/8 in. wide x 20 in. tall. The tabs extend 4-1/8 in. and can be easily trimmed.

works well. Anonymous. Sun Apr 05 2026

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This rocker style spring tension roller assembly is used on International doors. It was used on International series 900, 925, 950 and newer. The body is extruded aluminum with a tension spring attached. It has a 1 Inch diameter steel ball bearing center grooved roller. Order yours today and have your door slide like new.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This spring tension roller assembly is used by DorWal, Guardian as well as a variety of other sliding patio door manufacturers. It has a flat tension spring, steel housing and a 1-1/4 Inch high-density polyethylene roller. The roller installs into the door by snapping onto the existing diecast door frame corner. These can be used as top or bottom rollers. Order yours today and have your door slide like new.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a stainless steel housing and spring-loaded arm roller assembly, with a 1-1/4 Inch stainless steel ball bearing roller attached. Used by Bay-Mills as well as a variety of other patio door manufacturers. The spring-loaded roller arm is adjusted by the adjustment sleeve and screw on top. Order yours today and have your door slide like new.

This is a zinc-plated steel spring that offers positive tension adjustment for most storm and screen doors. All you have to do is turn the adjusting spring in or out of the mainspring to change the tension for a light or heavy door.

This is a 7/16 in. white plastic housing with steel roller. It features a center-grooved roller. Typically used by Krestmark.

Worked perfectly for our window. Nancy. US. Sat May 30 2026

These heat-treated steel tension springs hold window screens into sliding aluminum window screen channels. Requires (2) 3/16 in. holes drilled 3-3/16 in. apart.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a tension spring roller assembly with an offset, or bent, spring design used by Academy, Metal Industries and a variety of other patio door manufacturers. The roller is a 1 Inch diameter steel ball bearing roller with a tension spring that is a heat treated steel spring. The bent, or angled flat spring installs into the screen door frame so that the roller assembly cushions the door as it rides back and forth. For high density polyethylene rollers use Prime-Line part B 609. Order yours today and have your door slide like new.

Experience durability and performance like never before. Prime-Line's high-quality wrinkle-free fiberglass window screen mesh are built to last, withstanding washing, sun exposure, and the test of time—offering you years of reliable service. Say goodbye to torn and dirty screens! Our easy-to-install replacements are perfect for windows, screen doors, sliding doors, and courtyards, ensuring a fresh and clean look for your home. Unlike standard supermarket options, our screens provide enhanced durability and superior functionality, making them a step above the rest. Enjoy fresh air without compromise! Our screens allow for smooth airflow while offering UV protection and crystal-clear views—giving you the perfect balance of comfort and functionality. Upgrade today and experience the quality and difference!

This is a 34-1/2 inch molded plastic screen door grille that allows for maximum screen coverage on standard 30 inch to 36 inch sliding screen door. Proper installation of grille adds strength to entire door and helps prevent screen fabric damage. Molded plastic grille body measures 26-1/8 inch wide x 20 inch tall. The tabs extend 4-1/8 inch and can be easily trimmed. Molded white plastic construction.

This has been perfect for keeping the screen porch door protected from dogs and kids. My husband is happy not to have to replace the screen all the time.. Amy Willauer. Kirkwood, NY. Fri Jun 26 2026

Easy to install. This type of plunger is used to hold aluminum frame screens into window frames.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This high-tension steel spring roller assembly fits onto the Columbia Uni-Fit series door. This roller assembly has a 1-inch diameter high-density polyethylene roller mounted in the housing. The flat steel spring end catches onto the inside of the door frame while the flat edges of the two tabs extending out in front of the roller restrict the roller from retracting too far up into the door frame as it rolls. This sliding screen door roller assembly insert has a thinner high-density polyethylene frame than the Prime-Line part B 646. It has an adjustable high-density polyethylene inner housing and high-density polyethylene roller. The assembly inserts into the bottom or top of the sliding screen door using the included screws. The roller adjusts to the correct position needed. This style is found on Columbia sliding screen doors but is also used by a variety of other sliding screen door manufacturers. Please note the dimensions and design when compared with an old roller. Order yours today and have your door slide like new.

These are stamped aluminum clips for attaching window screens to awnings and other types of windows. Commonly used with 3/8 in. x 3/4 in. screen frame.

These are window screen stretcher clips with screws are constructed from stamped aluminum. They fit most 3/8 inch x 5/8 inch frame applications. Often used to attach your window screens to awning and other types of windows.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a very popular sliding screen door corner used by Arcadia, Guardian and a variety of other sliding screen door manufacturers. It is diecast with an adjustment screw that would adjust the Prime-Line part B 515 style roller (sold separately) that has been installed onto the corner's roller pivot arms. The diecast corner fits into the sliding screen door frame holding the bottom or top rails and the side stiles together. Order yours today and have your door slide like new.

This is a white flush mounted handle and latch set used by many patio door manufacturers. It has a steel hook latch with 1 inch standard spacing. This handle set will fit a minimum door thickness of 15/16 inch and up to a maximum thickness of 1-1/8 inch. It is 5-11/16 inch long and 7/8 inch wide with 5-1/8 inch mounting holes. Made of diecast metal, the handles fit flush into the screen door frame with an inside automatic locking feature.

was easy to install.. Gerald. Sacramento, CA. Sat Jun 28 2025

The Prime-Line K 5051 spring-loaded screen door catch is constructed from high-quality steel with a durable zinc-plated finish, ensuring long-lasting performance and secure closure. Featuring single roller arms, it keeps your screen door firmly shut, preventing unwanted openings caused by loose or worn latches and door closers. Designed for universal compatibility, this catch fits most hinged-swinging screen doors and accommodates various door and casing thicknesses for a versatile installation. Equipped with smooth, no-mar plastic rollers, it protects your door’s finish from scratches while delivering consistent latching and smooth operation. For precise fitting, please refer to the line art drawing to confirm dimensions before purchasing.

These are plastic clips used to secure window screens, storm windows, and storm door panels. Accepts a #10 screw.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a center grooved sliding screen door tension roller that is used by a variety of sliding patio door manufacturers. Used on the bottom as well as the top of the sliding screen door. The roller is a 1 Inch diameter weather resistant stainless steel ball bearing roller. The tension spring is 3-1/4 Inch long and is a heat treated high tension steel spring. For the high density polyethylene use Prime-Line part B 523. Order yours today and have your door slide like new.

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Easy to install with a few simple tools. This style roller is used on Revco-West and similar styled patio doors.

These are extruded aluminum clips used to attach storm windows or screen panels to storm door frames with aluminum knurled head thumbscrews.

These window screen tension springs are constructed of heat treated spring steel and come in a zinc plated finish. Tension springs of this style mount onto the sides of aluminum screen frames and provide holding tension when inserted into sliding window screen channels. These tension springs will fit into 5/16 in. or thicker screen frame material. Requires two 3/16 in. holes drilled into the screen's edge for installation.

Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This sliding screen door handle and latch is used by Bay Mills doors as well as other patio door manufacturers of Hat Section doors. The handle mounting holes are 3-1/2 inch on center. It contains a black plastic inside pull with a latch slide button and an outside pull. The steel latch slides up and down to engage the keeper Prime-Line part A 203 (not included). Order yours today and make your sliding screen door secure again.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is an Arcadia style roller assembly used by Arcadia doors as well as a variety of other sliding patio door manufacturers. This is also currently a very popular design amongst patio door manufacturers in today's market place. It has a wire tension spring and comes with a 1 Inch diameter high density polyethylene roller and fits onto the Prime-Line part B 569 corner insert (sold separately). It is often used on the top as well as the bottom of the sliding screen door. Also look at Prime-Line parts B 515, B 610, B 714, B 736 and B 821 for similar spring tension rollers. Order yours today and have your door slide like new.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a center grooved sliding screen door tension roller that is used by a variety of sliding patio door manufacturers. Used on the bottom as well as the top of the sliding screen door. The roller is a 1 Inch diameter high density polyethylene ball bearing roller. The tension spring is 2-1/2 Inch long and is a heat treated high tension steel spring. For the stainless steel use Prime-Line part B 573. Order yours today and have your door slide like new.

These are wire tension springs made of spring steel. Designed to retain window screens in aluminum window frames through tension.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is an Arcadia style roller assembly used by Arcadia doors as well as a variety of other sliding patio door manufacturers. This is also currently a very popular design amongst patio door manufacturers in today's market place. It has a wire tension spring and comes with a 1-3/8 Inch diameter steel roller and fits onto the Prime-Line part B 569 corner insert (sold separately). It is often used on the top as well as the bottom of the sliding screen door. Also look at Prime-Line parts B 515, B 610, B 714, B 736 and B 821 for similar spring tension rollers. Order yours today and have your door slide like new.

These storm door panel clips by make-2-fit are constructed of plastic and come clear in color. They feature a flush-fitting design and are used to retain glass and screen to storm door panels. The solid, low visibility, clear plastic construction of these clips help them to blend easier with finished surfaces. They come complete with fasteners for quick and easy installations. The clips have a 1/32 in. A tip that allows for secure attachment of storm windows and screen panels to storm door frame with a screw.

Upgrade your storm and screen door latching system with the Prime-Line K 55177 Interior Latch, designed for versatility, durability, and a secure fit. offer long-lasting performance while enhancing your door hardware. The set includes brown screws ensuring the perfect fit. Designed for use with similar inside latches. For added convenience, installation fasteners are included for a quick and hassle-free setup. Choose the Prime-Line K 55177 for a secure, reliable, door latching solution.

Nuk3y magnetic screen door is designed to make your life easier with long-lasting performance. Our magnetic screen doors are constructed with heavy-duty fiberglass mesh material. This will provide premium strength that is tear-resistant, more transparency, waterproof, and flame retardant. All hardware is included with instruction on how to install it. Available in a variety of sizes for different size doors.

I measured and purchased 3 screen doors…one double size door and two single doors with built in magnets and put them up by myself in a matter of minutes using Velcro and extra tacks (provided) in my beautiful Green House. No matter how many times I go In and Out of screen doors…it closes every time…I am very pleased with Products, Service and Delivery. Thank You Wayfair !. Millie. US. Thu Apr 09 2026

Can be used with aluminum screen frames on windows of various types. Plastic clips like these are also used to secure window screens, storm windows, and panels of storm doors. These plastic screen clips are easy to install and are used by many. All the necessary fasteners are included for a quick and easy installation.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door roller assembly fits the Andersen Narroline, Frenchwood, and Perma-Shield doors. The roller assembly snaps into place with the adjustment stem, being accessible on the edge of the door frame. Housing is high-density polyethylene with a grooved 1-1/4 inch diameter high density polyethylene roller. Order yours today and have your door slide like new.

Works as super! Fast shipping. Marci. US. Mon Jul 04 2022

These are extruded aluminum clips used to attach storm windows or screen panels to storm door frames with aluminum knurled head thumbscrews. The knurled head allows for a quick and easy installation of these clips, no tools are needed. They have a 5/16 in. offset, a 1 in. length, and are 1/2 in. wide. Each package contains 8 storm panel clips. If you choose to use a wrench to tighten these use caution and do not over tighten.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This insert style sliding screen door assembly has a high density polyethylene housing with a high density polyethylene roller insert. It is used on the Academy Uni-Fit screen doors. The roller is a 1 Inch high density polyethylene roller and is used on the top or the bottom of the door. Easy to install by inserting into the open U-shaped frame and inserting the screw. For steel ball bearing see Prime-Line part B 624. Order yours today and have your door slide like new.

This is a tension spring, flat, 3-1/8 inch length, heat treated steel, mill. Holds window screens into sliding aluminum window screen channels. Tension springs constructed from heat treated spring steel. They feature a round top design and require two 3/16 inch holes drilled 3-3/16 inch apart.

These are extruded aluminum clips used to attach storm windows or screen panels to storm door frames with aluminum knurled head thumbscrews.

These flush black plastic clips are used to secure window screens, storm windows, and storm door panels.

Margaret. US. Thu Apr 17 2025

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This insert style sliding screen door assembly has a high density polyethylene housing with a high density polyethylene roller insert. It is used on the Academy Uni-Fit screen doors. The roller is a 1 Inch steel ball bearing roller and is used on the top or the bottom of the door. Easy to install, by inserting into the open U-shaped frame and inserting the screw. For steel ball bearing see Prime-Line part B 624. Order yours today and have your door slide like new.

This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

Upgrade your sliding doors with this back mount tandem roller assembly, designed for Andersen wood patio doors and compatible with many other wood door brands. Two 1-1/4 inch concave steel ball bearing rollers ensure smooth, quiet operation, while the stamped steel housing with side adjustment makes precise alignment simple. Top insert points and side locking tabs secure the assembly for long-lasting performance. Perfect for DIY homeowners or contractors, this durable roller assembly restores effortless sliding and improves door longevity. Installation is easy with a standard Phillips head screwdriver.

Anonymous. US. Sat Apr 12 2025

This is a standard pneumatic screen door closer for medium weight wood or aluminum out swinging doors. It has a 10-1/2 in. long barrel and has a black finish. It comes complete with mounting brackets and attaching hardware. It has adjustable closing speed.

Opal. Hugo, Oklahoma. Fri Sep 19 2025

Used by H and D Industries. 4 top and 4 bottom clips.

These are extruded aluminum clips used to attach storm windows or screen panels to storm door frames with aluminum knurled head thumbscrews.