1 Gal N100 1 Enigma Low Luster Exterior Paint Behr Pro Pr62001

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor AR500 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Seals great and gives the surface a nice shine!. Bobbi. Evans City, PA. Mon Jun 15 2026

The Armor SX5000 is a PRO-Grade solvent-based Silane Siloxane water-repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Great product for protecting concrete. Be careful with how you want to apply this product. I used a plastic container and sprayer, and this sealer literally melted the plastic/ spraying wand. I had to buy stailess steel sprayer to apply this sealer. Also, use a very good quality gloves to avoid any skin rash. It would be great if the supplier supplied MSDS sheet and warning label to not to use any plastic sprayer. Product is excellent, easy to apply! I hope it will keep my concrete in great condition for next 3-4 years.. Junaid. Edmonton, AB. Mon Sep 15 2025

The Armor SX5000 WB is a PRO-Grade water-based penetrating water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 WB is made from high quality, non-recycled, US manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Satisfactory. Hedley. Thomaston, ME. Mon Jul 27 2026

The Armor AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The Armor AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a low gloss wet-look finish. The Armor AR350 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption, including cracking, spalling, pitting, dusting, mold, mildew, and algae growth.

Good sealer for concrete driveway. Robert. Butte, MT. Thu Apr 02 2026

This works well with Mannington Audra Flex.. Kathryn. Xenia, OH. Mon Jun 08 2026

Changed a client's old high hats to these and they were very pleased. The light was so bright we had to install a dimmer, but they did not mind the extra cost as they were looking for this bright light when working in the kitchen.. Beautiful Home. Florida. Sun Aug 11 2013

Our NEW Starlike EVO grout is a Two-component, acid-resistant epoxy grout for laying and grouting all types of tiles and mosaics with joints 1mm (3/64) to 15 mm (19/32) in. width. World's leading high-performance and high-fashion grouting material. This Litokol Epoxy grout is extremely easy to install and maintain. Can also be used as an adhesive. We also offer several The Tile Doctor Shimmer / Glitter additives that you can add to any of our colors. Product with ultra-low volatile organic compound (VOC) emissions. When applying grout to the tile we recommend using The Tile Doctor Epoxy Float. This float is specially designed to spread grout into joints when grouting tile with epoxy-based grout.

Great color match for what I needed. Zarinah. Los Angeles, CA. Wed Jun 03 2026

The Armor S2000 is a ready-to-use sodium silicate densifier designed to increase the strength and reduce the porosity of poured concrete surfaces. It penetrates deep into the substrate where it chemically reacts to form a calcium silicate hydrate barrier within the pores that reduces and increases the strength and density of the concrete by up to 45%. It will help to reduce concrete dusting and reduce the movement of subsurface water and moisture through the concrete. The Armor S2000 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete surfaces. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film.

It left a slight white speckle pattern on my black concrete, but worked to harden the polished concrete floors.. Max. Bishops Cove, NL. Sat Sep 26 2026

The Trans-Atlantic 500 series "Old Style Rim" exit device is suitable for hollow metal or wood doors where there is no projection on the surface. It's appropriate for commercial and industrial applications where heavy-duty usage is anticipated such as office buildings, retail spaces and hotels. Moreover, it fits with doors up to 36 in. wide. It comes with a strike plate, filler plate and latch. However, the exterior lever trim is sold separately. These series meet the performance standards of Grade 1 and ADA compliant exit devices. Item is only available in Aluminum finish.

The Armor SX5000 WB is a PRO-Grade water-based penetrating water-repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 WB is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Easy to apply and cheaper than paying someone else!!. Anonymous. Tue Aug 25 2026

The VOLUME LED Outdoor Wall Mount in Graphite Grey is a sleek, contemporary fixture designed for reliable performance in outdoor environments. Its compact form features a cast aluminum body with a durable powder-coated finish, offering weather resistance and longevity. Equipped with a frosted diffuser and integrated LED, it delivers soft, downward-facing light—perfect for modern patios, pathways, and entrances.

Our Starlike EVO Classic Collection Epoxy Tile Grout allows you to achieve a flawless, high-performance tile installation with ease. This advanced two-part epoxy grout also works as a Class R2T adhesive, so you can rely on strong vertical grip and excellent bonding strength. Whether you're upgrading your bathroom, designing a kitchen backsplash, installing tile in a pool area, or tackling a sauna project, you’ll get reliable, long-lasting results indoors or outdoors. The smooth consistency and easy cleanup make your home improvement work faster and more efficient, whether you're a DIYer or a seasoned professional. Enjoy rich, stable color that stays true and won’t bleed onto your tile surfaces. It works beautifully with porcelain, natural stone, glass mosaics, metallic tiles, and more. No matter the surface or room, you’ll be able to grout joint widths from 1 mm to 15 mm with ease. Your finished surface will be crack-resistant, waterproof, stain-resistant, and strong enough to handle high-moisture, high-traffic areas. You won’t have to worry about chemical damage or discoloration, even in swimming pools, saunas, or Turkish baths. With a working time of about one hour and walkable surfaces in just 24 hours, you’ll keep your project on schedule without sacrificing quality. You can count on Starlike EVO Classic Collection Epoxy Tile Grout for a professional-grade finish that’s safe to use, low in VOCs, and non-corrosive.

Works very well, just a little difficult to clean up tools and such if you're working solo and trying to beat the clock on installing the grout and cleaning up.. Anonymous. Washington. Sat May 30 2026

The InSinkErator Evolution Quiet Series Excel garbage disposal is for those who enjoy the very best kitchen appliances. The ultimate in performance - nothing grinds more with less noise. It features the best of InSinkErator’s grinding and Sound Seal Plus noise-reduction technologies, handling more volume and more types of food waste while making 60% less noise than standard disposers. InSinkErator Evolution Series disposals represent the highest standard in performance. Simply put, they are the best grinding, quietest line of disposals we have ever made. This model features InSinkErator exclusive Lift & Latch installation technology allowing for quicker sink connection. It's our easiest install ever! Includes Quiet Collar sound-reducing sink baffle.

Fit our needs.. Jennifer. Latham, NY. Thu Apr 09 2026

The Armor WB15 is a water-based acrylic sealer designed to seal and protect concrete and paver surfaces with a durable low gloss surface film. The Armor WB15 is a fantastic sealer if you are looking to enhance surfaces with a low gloss finish.The Armor WB15 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

The folks at Foundation Armor were very helpful in helping us find a low gloss sealer for our stamped concrete. We applied 2 coats and it came out looking great.. Anonymous. Pembroke New Hampshire. Sat May 06 2023

The Armor AX25 combines two great products into one! With the AX25, you get a penetrating water repellent sealer, and a high gloss acrylic coating - all packed into one amazing product!The Armor AX25 is a solvent-based siloxane-infused acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AX25 is a fantastic sealer if you are looking to bring out dull and faded surfaces, enhance surfaces with a high gloss wet look finish, and provide superior water repellency benefits to the surface. The Armor AX25 also doubles as a cure and seal and can be applied to new concrete.The Armor AX25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

You will need a 2nd coat. It dries clear, but after 1st coat dried it lost a lot of it's gloss. GREAT customer service said I needed a 2nd coat and the gloss will return.That's what I am about to do.. Bruce. Wed Jul 05 2023

Epoxy Elite EVO Acid-resistant 2-part epoxy mortar for the installation and grouting of ceramic tiles and mosaics with 1/32” to 5/8” (1 to 15 mm) joints. For virtually all areas of application, indoor and outdoor floors and walls, also rated for pool and steam environments. Product with ultra-low emission of volatile organic substances (VOC) the ZHERORISK formulations provides an innovation which are safer for the installer, the jobsite and have no transportation or environmental negatives like all of the other epoxy grouting products. Innovative new approach to Epoxy Mortar that enables a smoother matt finish. Epoxy Elite EVO is a commercial product that can be used as a non-sag setting material and grouting product. Extremely easy to install and maintain (follow specific instructions for this product). 2-part anti-acid epoxy mortar. Part A consists of a mixture of epoxy resin, fine-grain siliceous aggregates, pigments and specific organic additives. Component B consists of an innovative organic catalyst. The 2 parts, once mixed together at room temperature will have a full 60 minutes of application and cleaning time, and forms a creamy mixture with excellent smoothness, also for no-drip vertical application. Once hardened, the product has ultra-high performance in terms of mechanical and chemical resistance. The grout is industrial grade performance even when subjected to enzymatic cleaners and other harsh environments. When applying grout to tile we recommend using The Tile Doctor Green Epoxy Float. This float is specially designed to spread grout into joints when grouting tile with epoxy-based grout.

This product is the best. The absolute best ! Sure it's expensive but well worth it.. Monique. QC. Sun Dec 21 2025

A quiet storm of air-clearing power in a designer package, the Monsoon Mini II gets the job done. Featuring a 600-CFM blower, hybrid baffle filters, Airflow Control Technology (ACT™), and dual-level LumiLight LED lighting. Also includes recirculating and make-up air options.

working well for one year now and no issues. would recommend. Dan. Mechanicsville, VA. Sun Jun 14 2026

This exquisite spotlight by Buster and Punch is crafted from powder-coated metal. Its adjustable spotlight allows you to direct light precisely where needed, enhancing any space's allure. Whether you’re accentuating art or creating a cozy reading nook, this lighting solution combines form and function effortlessly

I’ve been eyeing these lights ever since we started our new construction home. Thank you Wayfair for having a sale on it!!. Kai Yin. San Jose, CA. Wed Jul 22 2026

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces, and enhance surfaces with a high gloss wet look finish.The Armor AR500 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Fantastic sealer. Anonymous. Thu Apr 16 2026

The Scirocco Plus down draft is perfect for island installations, where an overhead canopy would be obstructive, or wall installations where cabinet space is at a premium. With a reversible motor box, the hood can fit behind a range top, cooktop or cooktop/oven combo.

When you are tight on joist space and need light, this decorative is the ideal solution. The quiet 0.4 Sones bathroom fan with adjustable 50-80-110 CFMs fits 2” x 4” construction and is approved for installation in either an insulated ceiling or wall. A 10W 3000 K 850 Lumens dimmable LED light with 0.7W night light provides just the right amount of light whether showering, shaving, or just trying to steal five minutes of peace. The sleek low profile white grille gives your bathroom an elegant updated look. Galvanized steel fan housing unit with black rust-resistant powder coat finishes and built-in backdraft damper. Oval 4” duct connector and quick-install brackets are included. Full six-year warranty. ETL is listed for wet application when used with a GFCI branch circuit wire, meets ASHRAE 62.2 national standards for achieving acceptable indoor air quality in typical residences, and is JA8 compliant for CA Title 24. Aero Pure bathroom ventilation and lighting solutions- Style. Performance. Energy efficiency.

Caveat: I haven't installed it yet. But it arrived on time, in the expected condition, the packaging was protective, the instructions are clear (they're for a couple different models, so you have to pay attention to what model you're actually working with). I like the options of the different speeds and the night light, though I'd rather it were an actually adjustable speed fan (I'd pay more for that feature). I also don't like that the light is round but the housing is square... perhaps ideal for retrofit but I'm gutting the entire room and would prefer a sleeker look (it just doesn't seem to exist with the options I want). I am a little disappointed with the plastic-y look of the fixture itself though, and this is the real reason for the missing star. The visible portion of the housing is actually made of plastic, as advertised, not coated metal or anything... I guess that's good for rust-proofing, but... it just looks much cheaper than I'd rather. I'm hoping it will look better in a finished ceiling than it did during my receipt-inspection of it. I left the protective film on the light fixture in my photos, that will obviously look better once installed. I'll hopefully be able to update this review with additional photos and comments at that time. Post installation update: I like the nightlight feature, the fan is super quiet (it's hard to hear if it's turned on until it gets going even), but it's a very *yellow* light. I guess it does say 3000K is the color, but... honestly it looks more like 2500K lights than that. The paint on the ceiling is Sherman Williams High Reflective White (the highest LRV / "whitest" white paint they sell). So we will likely just use the nightlight and fan features, and rely on the other lights in the bathroom for actual light.. E.w.. PA. Tue Jan 04 2022

The Armor AX25 combines two great products into one! With the AX25, you get a penetrating water repellent sealer, and a high gloss acrylic coating - all packed into one amazing product!The Armor AX25 is a solvent-based siloxane-infused acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AX25 is a fantastic sealer if you are looking to bring out dull and faded surfaces, enhance surfaces with a high gloss wet look finish, and provide superior water repellency benefits to the surface. The Armor AX25 also doubles as a cure and seal and can be applied to new concrete.The Armor AX25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Bought AX-25 to reseal my pool deck and lanai. This stamped concrete deck has to be resealed every 2-3 years. Used tint from another company (very good stuff). However, I decide to give Foundation Armor a try for sealing. I am very pleased and find this to give a better appearance than the sealant I used before from the tint provider. Gloss seems much brighter and just seemed to go down easier. Of course it will a year or two before I know for sure, but so far it looks great.. Rosetejas. Se Texas. Wed Jul 12 2023

The InSinkErator Evolution 0.75HP, 3/4 HP Garbage Disposal, offers a clean, hygienic, convenient, and environmentally responsible way to rid your kitchen of food scraps quickly. Septic-safe for properly maintained septic systems, this compact garbage disposal effortlessly grinds food waste into tiny particles that easily flush down the kitchen drain. Part of the InSinkErator Advanced Series, premium and high-performance InSinkErator garbage disposals with patented SoundSeal technology for significantly quieter operation than standard disposals and superior grind performance to handle tough and fibrous food scraps, the Evolution 0.75HP disposal features a 3/4 HP, heavy-duty Dura-Drive induction motor. It provides jam-busting torque and rust-resistant, stainless steel grind components packed into a compact design that fits easily under the kitchen sink, leaving room for other kitchen necessities. This EZ Connect InSinkErator garbage disposal also features the EZ Connect Hardwire Adapter, EZ Grip Handles, EZ Removable Dishwasher Inlet Plug, and Lift and Latch technology for easy installation. Your kitchen is the heart of your home, where you gather with family and other loved ones. The perfect complement to every kitchen since 1938, InSinkErator has been making products that are better for your family and your world. Simple solutions from InSinkErator help your Kitchen Better.

Perfection! a good price from Wayfair offset the cost of my plumber's install. Paula. Philadelphia, PA. Tue Jun 02 2026

From upscale boutiques to modern residential interiors, the MFD03-MW-CC downlight delivers tailored illumination with sleek, minimalist appeal. Designed for maximum adaptability, this 3″ fixture transitions effortlessly between recessed lighting and spotlight functionality—making it a go-to solution for dynamic lighting environments.

The Armor AG BROWN SEAL is a solvent-based acrylic sealer designed to enhance, seal, and protect exposed aggregate concrete surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss brown-tinted surface film. The Armor AG BROWN SEAL is a fantastic sealer if you are looking to bring out dull and faded exposed aggregate concrete, and enhance them with a brown-tinted high gloss wet look finish.The Armor AG BROWN SEAL is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Amazing coverage for our aggregate sidewalk. The sealer not only lives up to harsh winters here in the North, but is amazingly beautiful in the summer! This is the only product we will buy for our concrete need.. Johna. Pittsburgh, PA. Mon Sep 11 2023

Dealing with water leaks is now easy with the Mr. Steam Drain Pan. This pan is made from high-quality materials that make it sturdy and long lasting. Sporting a silver finish, this drain pan effortlessly merges with any bathroom interior decor. This drain pan is the perfect accessory with which you can hold water leaks from your generator or water heater. It features a 0.75" drain fitting. You can empty this drain pan every once in a while, when it is full. You can clean this Drain Pan from Mr. Steam with a dry cloth.

Really fast delivery and great packaging. Nrr3854. Ny, NY. Wed Jul 22 2020

Engineered to require no electricity or routine battery replacement, Ecopower® technology is the perfect marriage of hands-free operation, low maintenance, easy installation, and ecology.

Edlyn. Tue Jun 30 2026

A stunning minimalist sconce that scales well for large upscale residential, hospitality, and commercial installations. ADA rated for public spaces, this led luminaire delivers ambient back and edge-lit illumination. Blends seamlessly with a black finish and layers of lighting for any distinctive interior.