1 Gal 390d 6 Spring Moss Extra Durable Satin Enamel Interior Paint Primer Behr Ultra 775301

The Armor SX5000 is a PRO-Grade solvent-based Silane Siloxane water-repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Great product for protecting concrete. Be careful with how you want to apply this product. I used a plastic container and sprayer, and this sealer literally melted the plastic/ spraying wand. I had to buy stailess steel sprayer to apply this sealer. Also, use a very good quality gloves to avoid any skin rash. It would be great if the supplier supplied MSDS sheet and warning label to not to use any plastic sprayer. Product is excellent, easy to apply! I hope it will keep my concrete in great condition for next 3-4 years.. Junaid. Edmonton, AB. Mon Sep 15 2025

The Armor S2000 is a ready-to-use sodium silicate densifier designed to increase the strength and reduce the porosity of poured concrete surfaces. It penetrates deep into the substrate where it chemically reacts to form a calcium silicate hydrate barrier within the pores that reduces and increases the strength and density of the concrete by up to 45%. It will help to reduce concrete dusting and reduce the movement of subsurface water and moisture through the concrete. The Armor S2000 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete surfaces. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film.

It left a slight white speckle pattern on my black concrete, but worked to harden the polished concrete floors.. Max. Bishops Cove, NL. Sat Sep 26 2026

ANSI/BIFMA certified

The Armor SX5000 WB is a PRO-Grade water-based penetrating water-repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 WB is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Easy to apply and cheaper than paying someone else!!. Anonymous. Mon Aug 24 2026

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor AR500 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

The product went on exactly as described. It is working perfectly. I appreciate the care that was made in the delivery and the manufacturing of the product.. Keith. Sandusky Bay, Ohio. Tue Jun 30 2026

The Armor SX5000 WB is a PRO-Grade water-based penetrating water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 WB is made from high quality, non-recycled, US manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Satisfactory. Hedley. Thomaston, ME. Mon Jul 27 2026

ANSI/BIFMA certified

From Tsumeb Mine, Otavi-Bergland District, Oshikoto, NamibiaComplex cluster of highly reflective lustrous transparent cerussite crystals in a 60 degree twinning reticulating  formation. Covering its matrix in a complex parallel orientation.Weight: 1.8 lbs, Dimensions: 4 x 1.5 x 4 inches

From West Boltsburn mine, Rockhope District, Weardale, England. Beautiful specimen of purple fluorite crystals covered with overgrowth of siderite crystals with siderite. The specimen has colorful iridescent surfaces grading from yellow, to green to purple.

ANSI/BIFMA certified

The cluster of sharp scalenohedral calcite crystals is partially covered with lustrous iridescent metallic chalcopyrite crystals on the surfaces-bright and lively colors of blues, greens, and reds.

ANSI/BIFMA certified

ANSI/BIFMA certified

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces, and enhance surfaces with a high gloss wet look finish.The Armor AR500 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Fantastic sealer. Anonymous. Wed Apr 15 2026

Every piece of fabric is reborn and salvaged carrying its own story before being joined with other materials. Reclaimed materials highlight a key theme in his work, movement and migration. Art mirrors a thrilling journey into an unfamiliar place with all of its complexities, trying to assimilate to a new identity or reality (while staying true to his background and roots).

ANSI/BIFMA certified

From Kolwezi, Katanga, Democratic Republic of the Congo (Zaire)Colorful specimen of lustrous translucent blue cornetite crystals with translucent green malachite crystals covering the surfaces of brown matrix. The cornetite crystals look beautiful when viewed under magnification.Weight: 506.4 grams, Dimensions: 5.5 x 2.5 x 2 inches

The Armor AX25 combines two great products into one! With the AX25, you get a penetrating water repellent sealer, and a high gloss acrylic coating - all packed into one amazing product!The Armor AX25 is a solvent-based siloxane-infused acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AX25 is a fantastic sealer if you are looking to bring out dull and faded surfaces, enhance surfaces with a high gloss wet look finish, and provide superior water repellency benefits to the surface. The Armor AX25 also doubles as a cure and seal and can be applied to new concrete.The Armor AX25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

I applied the Foundation Armor AX25 to my concrete driveway this fall, and the final result is outstanding. For prep, I made sure to thoroughly degrease the entire surface first. I applied two coats using a 3/8" solvent-resistant nap roller, and it laid down perfectly with absolutely no lap marks—which is usually my biggest concern with rolled clear coats. Coverage was right on the money. It took about four gallons to get two solid coats down on a double driveway plus a 20x3 foot walkway. I rolled it out on a day when it hit 20°C (68°F), dropping down to about 7°C (45°F) overnight, and it cured beautifully without any issues. I also mixed in SharkGrip for traction. Slip-resistant additives can sometimes dull a clear coat or cause it to streak, but the AX25 maintained a brilliant, high-gloss wet look even with the aggregate mixed in. It looks amazing and cured to a hard, professional-grade finish. Highly recommended.. Jeff. Calgary, AB. Mon Oct 05 2026

The Armor AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The Armor AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a low gloss wet-look finish. The Armor AR350 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption, including cracking, spalling, pitting, dusting, mold, mildew, and algae growth.

Good sealer for concrete driveway. Robert. Butte, MT. Wed Apr 01 2026

ANSI/BIFMA certified

ANSI/BIFMA certified

The Armor AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The Armor AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a low gloss wet-look finish. The Armor AR350 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Great service and always in stock with very competitive prices too. Bob. Newark Delaware. Sun Sep 13 2026

The Armor AG BROWN SEAL is a solvent-based acrylic sealer designed to enhance, seal, and protect exposed aggregate concrete surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss brown-tinted surface film. The Armor AG BROWN SEAL is a fantastic sealer if you are looking to bring out dull and faded exposed aggregate concrete, and enhance them with a brown-tinted high gloss wet look finish.The Armor AG BROWN SEAL is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Excellent product. Used it to seal our curbing. Perfect color and added the wet look like it says. Anonymous. Thu Apr 30 2026

Beverly Fuller was born and raised in the city of Los Angeles. As a young girl, she was fascinated with the vast diversity of the world around her. She conveyed that fascination with art and was praised by her teachers as a talented artist. She went on to receive a Bachelor of Arts degree from Whittier College and a Master of Arts from California State University, Los Angeles. After completing her education, Beverly Fuller spent the next year traveling all across the United States, soaking up inspiration that launched her into a creative journey of becoming a painter. Currently, she resides in Northern California with her husband and two daughters. Every other month, Beverly travels back down to her hometown of Los Angeles to immerse herself in the artistic community and to find her next muse.

Transform your living space with this beautiful, gallery-quality wall art. Designed to add a sophisticated focal point and a touch of elegance to any room, it is carefully crafted on a 1.5-inch deep solid wood frame, offering enhanced stability, reduced warping, and a more substantial, elevated presence on your wall. The deeper profile not only improves durability but also gives the artwork a refined, high-end finish—making it the perfect way to express your style and elevate your home's décor.

Beneath every perfect synthetic turf installation is a reliable adhesive built to last. Ultrabond Landscape Turf CG delivers commercial-grade strength for both indoor and outdoor applications, making it the go-to choice for professional installers. Specially formulated to withstand diverse weather conditions, this high-performance adhesive ensures a secure, long-lasting bond for full-coverage applications or seam joining. Ideal for residential lawns, sports fields, and commercial landscapes, it provides the consistent hold needed for seamless, durable results that stand the test of time.

They have a big delivery issues. i dont recommend to buy anything from wayfair.. Anonymous. Sat May 18 2024

This premium wall art piece is crafted from durable 1.149mm thick aluminum, offering a strong yet lightweight construction designed for long-lasting quality. Its sleek, high-gloss finish enhances image vibrancy, while smooth rounded corners and a sturdy wooden frame mount provide a polished, modern look that’s easy to hang. Simple to maintain, it can be gently wiped clean with a damp cloth. Please note that colors may appear differently depending on individual monitor settings—refer to the provided color swatch hex codes for the most accurate color representation.

Beverly Fuller was born and raised in the city of Los Angeles. As a young girl, she was fascinated with the vast diversity of the world around her. She conveyed that fascination with art and was praised by her teachers as a talented artist. She went on to receive a Bachelor of Arts degree from Whittier College and a Master of Arts from California State University, Los Angeles. After completing her education, Beverly Fuller spent the next year traveling all across the United States, soaking up inspiration that launched her into a creative journey of becoming a painter. Currently, she resides in Northern California with her husband and two daughters. Every other month, Beverly travels back down to her hometown of Los Angeles to immerse herself in the artistic community and to find her next muse.

This is a beautiful statement piece of artwork. It added the glam and pop along with my other décor giving my design studio the look and feel I want.. Kiki. Texas. Mon Aug 07 2023