1 Gal 250f 5 Fudge Bar Low Luster Exterior Paint Behr Pro Pr62301

The Armor WB15 is a water-based acrylic sealer designed to seal and protect concrete and paver surfaces with a durable low gloss surface film. The Armor WB15 is a fantastic sealer if you are looking to enhance surfaces with a low gloss finish.The Armor WB15 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

The Armor SX5000 is a PRO-Grade solvent-based Silane Siloxane water-repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Great product for protecting concrete. Be careful with how you want to apply this product. I used a plastic container and sprayer, and this sealer literally melted the plastic/ spraying wand. I had to buy stailess steel sprayer to apply this sealer. Also, use a very good quality gloves to avoid any skin rash. It would be great if the supplier supplied MSDS sheet and warning label to not to use any plastic sprayer. Product is excellent, easy to apply! I hope it will keep my concrete in great condition for next 3-4 years.. Junaid. Edmonton, AB. Mon Sep 15 2025

The Armor AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The Armor AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a low gloss wet-look finish. The Armor AR350 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption, including cracking, spalling, pitting, dusting, mold, mildew, and algae growth.

Good sealer for concrete driveway. Robert. Butte, MT. Wed Apr 01 2026

The Armor S2000 is a ready-to-use sodium silicate densifier designed to increase the strength and reduce the porosity of poured concrete surfaces. It penetrates deep into the substrate where it chemically reacts to form a calcium silicate hydrate barrier within the pores that reduces and increases the strength and density of the concrete by up to 45%. It will help to reduce concrete dusting and reduce the movement of subsurface water and moisture through the concrete. The Armor S2000 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete surfaces. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film.

It left a slight white speckle pattern on my black concrete, but worked to harden the polished concrete floors.. Max. Bishops Cove, NL. Sat Sep 26 2026

The Armor SX5000 WB is a PRO-Grade water-based penetrating water-repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 WB is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Easy to apply and cheaper than paying someone else!!. Anonymous. Mon Aug 24 2026

Elkay’s Liv built-in filtered water dispenser makes it easy to elevate and customize the home, with its high design and unique hydration experience. This in-wall premium water dispenser provides homeowners instant, hands-free access to cleaner, safer water in and beyond the kitchen — in the mudroom, recreation room or even master suite. The included PFOA/PFOS filter is rigorously tested and certified to NSF/ANSI standards to reduce harmful “forever chemicals,” known as PFOA/PFOS (PFAS), lead, as well as microplastics and more. Ideal for busy families and avid entertainers, this sleek, space-saving solution makes accessing water effortless. Enhance daily routines, such as filling single-brew coffee makers, watering cans and pet bowls, with touchless, filtered convenience.

I LOVE this filler!! I wish I would have spent the extra money for the refrigeration but it’s still been great. My only critique, I wish the water dispenser had a more centered pour, it sprays a little too wide and it is difficult to clean.. Jennyanne. Twin Falls, ID. Tue Aug 11 2026

The Armor AX25 combines two great products into one! With the AX25, you get a penetrating water repellent sealer, and a high gloss acrylic coating - all packed into one amazing product!The Armor AX25 is a solvent-based siloxane-infused acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AX25 is a fantastic sealer if you are looking to bring out dull and faded surfaces, enhance surfaces with a high gloss wet look finish, and provide superior water repellency benefits to the surface. The Armor AX25 also doubles as a cure and seal and can be applied to new concrete.The Armor AX25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

I applied the Foundation Armor AX25 to my concrete driveway this fall, and the final result is outstanding. For prep, I made sure to thoroughly degrease the entire surface first. I applied two coats using a 3/8" solvent-resistant nap roller, and it laid down perfectly with absolutely no lap marks—which is usually my biggest concern with rolled clear coats. Coverage was right on the money. It took about four gallons to get two solid coats down on a double driveway plus a 20x3 foot walkway. I rolled it out on a day when it hit 20°C (68°F), dropping down to about 7°C (45°F) overnight, and it cured beautifully without any issues. I also mixed in SharkGrip for traction. Slip-resistant additives can sometimes dull a clear coat or cause it to streak, but the AX25 maintained a brilliant, high-gloss wet look even with the aggregate mixed in. It looks amazing and cured to a hard, professional-grade finish. Highly recommended.. Jeff. Calgary, AB. Mon Oct 05 2026

The Armor WB15 is a water-based acrylic sealer designed to seal and protect concrete and paver surfaces with a durable low gloss surface film. The Armor WB15 is a fantastic sealer if you are looking to enhance surfaces with a low gloss finish.The Armor WB15 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

The folks at Foundation Armor were very helpful in helping us find a low gloss sealer for our stamped concrete. We applied 2 coats and it came out looking great.. Anonymous. Pembroke New Hampshire. Fri May 05 2023

The Armor SX5000 WB is a PRO-Grade water-based penetrating water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 WB is made from high quality, non-recycled, US manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Satisfactory. Hedley. Thomaston, ME. Mon Jul 27 2026

Elkay’s Liv built-in filtered water dispenser makes it easy to elevate and customize the home, with its high design and unique hydration experience. This in-wall premium water dispenser provides homeowners instant, hands-free access to cleaner, safer water in and beyond the kitchen — in the mudroom, recreation room or even master suite. The included PFOA/PFOS filter is rigorously tested and certified to NSF/ANSI standards to reduce harmful “forever chemicals,” known as PFOA/PFOS (PFAS), lead, as well as microplastics and more. Ideal for busy families and avid entertainers, this sleek, space-saving solution makes accessing water effortless. Enhance daily routines, such as filling single-brew coffee makers, watering cans and pet bowls, with touchless, filtered convenience.

I had to get this for our busy family! No more need for large bottles of water !. Dan. Fournier, ON. Wed Mar 06 2024

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor AR500 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

The product went on exactly as described. It is working perfectly. I appreciate the care that was made in the delivery and the manufacturing of the product.. Keith. Sandusky Bay, Ohio. Tue Jun 30 2026

RKX SmartWave carbon fiber radiant heaters are IP55 rated for indoor or outdoor use and deliver heat directly to people and objects – without warming the surrounding air. Powered by CarbonIQ carbon fiber elements, SmartWave produces high-output, medium-wave infrared heat with a soft, visible orange glow. With significantly less light than short-wave infrared, SmartWave heaters are ideal for outdoor patios and commercial spaces such as restaurants, where powerful heat is needed without excessive brightness. Each unit features an integrated built-in controller with three heat levels and a hand-held RF remote that can be paired with multiple heaters to create a synchronized, zoned heating system. This allows users to control several heaters within a single area as one group, all operating under the same settings. RKX also offers universal left- or right-side junction box mounting, enhanced by a unique LCD position sensor that automatically rotates the display based on the installation orientation. Additional features include a Permanent Timer mode that enforces timer-only operation at startup for easy compliance with local energy codes, along with a 24-hour automatic safety shutoff to prevent wasted energy. With RKX SmartWave – comfort is always in the palm of your hand.

Great product but too many amps for most installations. Had to return. Amy Petti Interior Designer,. All Things Beautiful Design, Petaluma Ca. Sat Sep 12 2026

This 1 HP Batch Garbage Disposal features a batch feed, 2500 RPM hi-torque motor, premium ultra-quiet sound shield, and antimicrobial protection to eliminate odors. It also comes with a 3-foot factory-installed power cord.

Needed a batch disposal with a high HP for a large family and this did the trick! Great price too!. Charlie. Amelia Court House, VA. Sat Jan 24 2026

Ozone Generator: Pure Air, Pure Living With 36,000mg/h powerful maximum ozone output and 3,230 square feet coverage area,ozone generator prioritizes your health by effectively eliminating odors, smoke, and pollutants from air. It features humidity display and 0-120 minute timer, ensuring indoor environment is constantly monitored.

Very good price for what this machine does!! Thank you!. Donna Quinn. Malakoff, Texas. Sat Aug 15 2026

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces, and enhance surfaces with a high gloss wet look finish.The Armor AR500 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Fantastic sealer. Anonymous. Wed Apr 15 2026

Carries cold water to the bottom of the tank for maximum hot water delivery.

Richard. Running Springs, CA. Sat Feb 18 2017

Exquisite workmanship 100% wood frame with upscale piano paint finish. Premium Spanish cedar wood trays. Not only a cabinet but also a decor for your cigar room, a combination of modern and classical.

This product features a 3 bolt mounting design that adapts to other similar mount models and a compact profile that is ideal for tight installations like farm sinks. But this product packs all the power of disposers with a high speed/high torque motor, jam-resistant design, and stainless steel grinding components backed by an unmatched warranty.

One horsepower is a lot of trash compactor. Lifetime warranty, this appliance is worth every penny. By the way it is so quiet.. Richard. Pearland. Thu Mar 31 2022

This ezH2O enhanced bottle filling station delivers a quick water bottle fill and helps sustainability efforts by minimizing use of disposable bottles. Consolidated, space-saving cooler and bottle filling design features a drop-down cooler wrapper for quick, convenient filter changes. Integrated look combines our exclusive Green Ticker that counts bottles saved and FillSafe filter recognition system that alerts to needed filter changes.

The water fountain was received when estimated and it arrived in great condition. We have it installed and it is working perfectly. This was a great find and the price was even greater. Thank you for the great customer service and product.. Anonymous. Thu Nov 13 2025

The 180L fuel transfer tank is designed for efficiency and durability, offering a generous 47-gallon capacity for diesel and gasoline storage. Made from high-quality HDPE plastic, it features a powerful self-priming gas pump that operates at 3000 RPM, with a flow rate of up to 30L/min. Included accessories ensure a complete fueling solution, while the sturdy protection cover guarantees safety and reliability. Perfect for various fueling tasks!

The Armor LV25 is a solvent-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor LV25 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor LV25 also doubles as a cure and seal and can be applied to new concrete. The Armor LV25 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Awesome product 2 coates and protected. I used this in the summer to seal stucco on my chimney and it really is armor against water damage. Can I give the sealer 6 stars?. Duke Of Babes. Tue Nov 12 2024

Enhance the performance and safety of your fire feature with our premium fire table wind screen, designed to shield your flame from wind while adding a sleek, modern look. Constructed from high-quality tempered glass, it provides durable, heat-resistant protection without obstructing the view of the flame. The screen is securely held in place by corrosion-resistant 304 stainless steel brackets, ensuring long-lasting performance in any outdoor environment. Easy to assemble and effortless to clean, this wind guard is the perfect addition to maintain steady flames, improve fuel efficiency, and create a more comfortable and stylish outdoor experience. Backed by a 1-year limited manufacturer’s warranty, you can rest assured knowing your investment is protected.

Good protection to keep kids and dogs tales from getting hurt. Lindsay. Cumming, GA. Thu Dec 23 2021

Ozone Generator/UV Air Purifier with 2 Ozone Plates, UV, and Charcoal Filter for 2500 Square Feet +

As described.. Anonymous. Fri Mar 20 2026

Karen. Alma, QC. Mon Aug 03 2026

The Armor WB25 is a water-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will protect the surface with a durable high gloss surface film. The Armor WB25 is a fantastic sealer if you are looking to enhance surfaces with a high gloss finish. The Armor WB25 also doubles as a cure and seal and can be applied to new concrete.The Armor WB25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

best ever. John. North Olmsted, OH. Thu Jun 03 2021

The Armor AG BROWN SEAL is a solvent-based acrylic sealer designed to enhance, seal, and protect exposed aggregate concrete surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss brown-tinted surface film. The Armor AG BROWN SEAL is a fantastic sealer if you are looking to bring out dull and faded exposed aggregate concrete, and enhance them with a brown-tinted high gloss wet look finish.The Armor AG BROWN SEAL is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Excellent product. Used it to seal our curbing. Perfect color and added the wet look like it says. Anonymous. Thu Apr 30 2026

The Armor WB25 is a water-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will protect the surface with a durable high gloss surface film. The Armor WB25 is a fantastic sealer if you are looking to enhance surfaces with a high gloss finish. The Armor WB25 also doubles as a cure and seal and can be applied to new concrete.The Armor WB25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Great product. Ron. Niagara Falls, NY. Sat Jan 21 2023

The Armor SC25 is a fast-acting cost-effective penetrating water repellent sealer specifically formulated for white, or very light unsealed concrete surfaces. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SC25 is made from high quality, non-recycled, US manufactured resins. It is designed for unsealed white and very light concrete. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Love it. Stef Newman. Clifton, TX. Sun Jun 06 2021

Tested and certified for reliable, easy-to-use in-home water filtration, the Delta® Clarifi™ Tankless Under Sink 6-Stage Reverse Osmosis System is certified to filter out more than 90 contaminants from your drinking water. The best-in-class system uses 6 filtration stages to reduce chlorine, chloramine, microplastics, PFAS, lead, arsenic, heavy metals, chemicals, nitrates, pharmaceuticals and more. The Clarifi™ Tankless System saves over 60% of under-sink space compared to tanked systems with its sleek design and 6-1/4-inch width. Designed for easy DIY maintenance, the carbon and RO filters and optional remineralizer cartridge have a two-year lifespan so you can quickly and easily replace them at the same time, and it takes less than a minute to replace each filter. You can install with confidence, knowing the Delta® Clarifi™ Tankless Reverse Osmosis System is backed by our warranty and highly-trained, live customer support.

It is supposed to be the best purifying solution. Parag. Sat Apr 11 2026