1 12 In Steel Roller Assembly Plain Back Primeline D 1759

This is a plain back patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 5/8 in. wide, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end. It is used by Capitol and a variety of other manufacturers of patio doors.

This is a stainless steel, plain back, patio door roller assembly with a 1-1/2 in. concave stainless steel ball bearing roller. It has a stainless steel plain back housing that is 3/4 in. wide, 1-1/4 in. tall and 2-5/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on the top. It is used by Daryl, Patio Magic and a variety of other manufacturers of sliding patio doors.

"Restore smooth sliding door operation with this plain back patio door roller assembly, designed to replace worn or damaged rollers on a wide variety of sliding patio door systems. Featuring a 1-1/4 inch concave (grooved) steel roller, this assembly helps provide reliable tracking and smooth door movement while supporting consistent performance during everyday use. The roller is equipped with precision ball bearings that reduce friction and promote easier sliding, helping minimize strain when opening and closing patio doors. Its durable steel construction is designed to withstand frequent operation, making it a dependable replacement for residential and light commercial applications. This assembly features a plain back housing with a rear-adjusting design, allowing for convenient door height and alignment adjustments during installation. The housing measures 3/4 inch wide, 1-1/8 inch tall, and 2-5/8 inch long, making it important to compare dimensions with your existing roller assembly before ordering. For installation flexibility, the housing includes a 1/4-20 threaded mounting hole on the back end as well as an optional #10-32 threaded hole on the top, accommodating a variety of patio door configurations used by different manufacturers. Whether you're repairing a sticking sliding door or replacing a worn roller assembly, this replacement component helps restore smooth, reliable operation. Be sure to compare the roller style, housing dimensions, and mounting configuration with your existing hardware to ensure proper fit and compatibility."

This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. The housing that is 5/8 in. wide and 1 in. tall with two mounting tabs/hooks on the top. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end that holds it in place once the tabs/hooks are snapped into place in the door's bottom rail. It has a 3/4 in. flare It is used by Smith Carry and variety of other manufacturers of patio doors.

Upgrade your sliding doors with this back mount tandem roller assembly, designed for Andersen wood patio doors and compatible with many other wood door brands. Two 1-1/4 inch concave steel ball bearing rollers ensure smooth, quiet operation, while the stamped steel housing with side adjustment makes precise alignment simple. Top insert points and side locking tabs secure the assembly for long-lasting performance. Perfect for DIY homeowners or contractors, this durable roller assembly restores effortless sliding and improves door longevity. Installation is easy with a standard Phillips head screwdriver.

Anonymous. US. Sat Apr 12 2025

This is a unique back, patio door roller assembly with a 1-1/4 inch concave, or grooved, steel ball bearing roller. The housing is 13/16 inch wide and 1-1/8 inch tall. It is rear adjusting with a 1/4-20 threaded mounting hole and mounting tabs, or ears, on the front end of the assembly. As the mounting screw engages the assembly, the ears or tabs latch onto an extruded area in the door's bottom rail. Usually used by Noranda Building Products, Noranda, Three Rivers Aluminum, Bee Cee, and a variety of other manufacturers.

This is a E-tab patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 23/32 in. wide and 1-3/16 in. tall with a dimple width of 7/8 in.. Used by Solar Industries and a variety of other patio door manufacturers.

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. It is a "K" tab patio door roller assembly with a 1-1/4 in. concave or grooved nylon ball bearing roller. The "K" tab style back end is a T shaped tab that is simply slid up into a similar T shaped receptacle in the bottom of the patio door. No screws are required. The housing is 5/8 in. wide and 1-3/16 in. tall with a flare and 3/4 in. dimple width. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Installation easy to install with a few simple tools. Refer to dimensional line drawing to match product specifications. This style roller is used on International and similar styled patio doors.

Replace or repair worn sliding door rollers with this 1-1/2 inch plain back tandem roller assembly, compatible with a variety of vinyl sliding patio doors. It features two concave (or grooved) steel ball bearing rollers in a durable stamped steel housing with rear adjustment for precise alignment. The housing measures 3/4 inch wide and 1 inch tall, with a #10-32 threaded mounting hole on the top for secure installation. Ideal for DIY homeowners or contractors, this assembly restores smooth, quiet sliding performance.

These horizontal sliding window roller assemblies are designed with flat-edged brass wheels housed in durable white plastic frames. Each assembly features a tandem roller design with strong steel axles, ensuring smooth and long-lasting operation for sliding window panels. The minimum mortise pocket size required is 3/8 inch wide x 3/8 inch deep x 1-5/16 inch long. Commonly used by a variety of window manufacturers, these rollers are an ideal replacement option for damaged or missing assemblies, helping restore effortless sliding functionality to your windows.

This 1-1/4 inch C-tab tandem roller assembly is designed for Pacific, Elco, and a variety of other sliding patio doors. It features 1-1/8 inch concave stainless steel ball bearing rollers in an adjustable stamped stainless steel housing for smooth, quiet operation. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together, ensuring a secure installation. The housing measures 11/16 inch wide with a 13/16 inch flare, 1-1/16 inch tall, and 3-1/8 inch long. Rear adjustment allows precise alignment, and mounting hardware is included. A Phillips head screwdriver is required for installation.

This 1-1/2 inch C-tab tandem roller assembly is designed for Pacific, Elco, and a variety of other sliding patio doors. It features 1-1/8 inch concave stainless steel ball bearing rollers in an adjustable stamped stainless steel housing for smooth, quiet operation. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together, ensuring a secure installation. The housing measures 11/16 inch wide with a 13/16 inch flare, 1-1/16 inch tall, and 3-1/8 inch long. Rear adjustment allows precise alignment, and mounting hardware is included. A Phillips head screwdriver is required for installation.

This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 3/4 in. wide and 1-3/16 in. tall with a dimple width of 7/8 in.. Used by Northrup series 600 doors and a variety of other patio door manufacturers.

This concave sliding window roller is constructed from nylon. It comes affixed to a white nylon housing. This style roller is used on H-R windows and similar styled sliding windows.

This barrel nut and bolt set is constructed of steel and comes in a zinc-plated finish. Sets like these are commonly known as sex bolts in the hardware industry, as well as Chicago bolts. This barrel nut (sex bolt) features a long female threaded shaft (inside), which fastens with the mating screw's outside thread. Barrel nuts and bolts like these are used where through-bolting applications are desired with a head on both sides of the materials being joined. Sets like these can be used for mounting hydraulic door closers on doors from 1-3/8 inch to 1-3/4 inch thick.

Replace or repair broken or missing sliding door rollers with this Prime-Line D 1998 Steel Sliding Door Roller Assembly. The stamped steel patio door rollers replacement is adjustable. This door roller assembly is used by a variety of metal framed sliding patio door manufacturers. Made of stamped steel housing with a yellow finish, these sliding door rollers are strong, durable, and built to last. The housing of the sliding door rollers replacement is 11/16 inches wide by 1-11/16 inches deep and 2-3/4 inches long. The concave ball bearing steel roller is 1-1/2 inch. A Phillips head screwdriver is required for installation. Use the screw in the front of the housing to adjust ride height. For further roller assembly sliding door dimensional information, please see the line drawing.

This is a 7/16 in. white plastic housing with steel roller. It features a center-grooved roller. Typically used by Krestmark.

Worked perfectly for our window. Nancy. US. Sat May 30 2026

This is an S-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the S-tab it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 17/32 in. wide and 1-5/32 in. tall. It is a common shape that a variety of patio door designers have incorporated into their patio door.

This is a plain back patio door roller assembly with a 1-11/16 in. concave or grooved nylon ball bearing roller used by Arcadia and a variety of other patio door manufacturers. The stamped steel housing has a unique design that is 3/4 in. wide, 1-5/16 in. tall and 2-11/16 in. long with an adjustment screw located on the back end. See Prime-Line part D 1731 for the tall version.

This is a sliding window roller assembly with a plastic housing and flat edged tandem brass rollers. It features brass axles with a low profile housing and a snap-in design.

This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 5/8 in. wide with a 11/16 in. flare, 1-1/4 in. tall with a rear adjusting screw. Replaces the old style Couples door roller and is used by a variety of patio door manufacturers.

This is a C-tab patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. The housing is 23/32 in. wide and 1-3/16 in. tall, and 2-5/16 in. long. As the C-shaped tab fits around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. Used by Merzorr and a variety of other patio door manufacturers.

This is a white plastic roller assembly. The roller is made of brass flat edge and is most often used by Elco, Better- Bilt Aluminum, and a variety of other manufacturers.

This is a U-back patio door roller assembly with a 1-1/2 in. concave (center grooved) steel ball-bearing roller. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw is tightened. The housing is 25/32 in. wide, 1-7/16 in. tall with a rear adjusting screw. Used by Crown manufacturing, Pennco, and a variety of other patio door manufacturers.

This is a sliding window white plastic housing. It is center grooved tandem brass rollers. Used on Merzon windows. Features a 2 position height adjustment housing can snap apart for single glazed, or left as tandem for dual glazed windows.

This sliding window roller assembly is constructed from nylon. It is attached to nylon housing and has flat edge tandem rollers. This style roller is used by a variety of window manufacturers.

This is a white plastic housing with concave tandem steel rollers. Used by a.b.c. Windows. A dual wheel upgrade to the prime-line part g-3038 improves glide and window performance.

This 1-1/8 inch C-tab tandem roller assembly is designed for a variety of sliding patio doors. It features two steel ball bearing rollers in an adjustable stamped steel housing for smooth, quiet operation. The C-tab mounting fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together, ensuring a secure fit. The housing measures 11/16 inch wide with a 7/8 inch dimple width, 1-1/16 inch tall, and 3-1/8 inches long. Rear adjustment allows precise alignment during installation. A Phillips head screwdriver is required.

This is a F-tab patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 3/4 in. wide and 1-1/2 in. tall with a rear adjusting screw. Used by Holleyview, Fullview and a variety of other patio door manufacturers.

Upgrade your sliding patio doors with this 1-1/2 inch stainless steel tandem roller assembly, compatible with a variety of metal or vinyl framed doors. The plain back stamped stainless steel housing contains in-line tandem concave stainless steel ball bearing rollers, delivering smooth, quiet operation and long-lasting durability. Rear adjustment allows precise alignment during installation, and a 1/4-20 threaded mounting hole on the back (with optional #10-32 threaded hole on top) ensures a secure fit. Built to resist corrosion, this roller assembly performs reliably in severe weather conditions. Ideal for DIY homeowners or contractors, installation requires only a Phillips head screwdriver.

This is a sliding window roller assembly made of extruded aluminum bracket with a flat edge steel ball bearing roller. These brackets are used on international imperial series 1200 windows and a variety of other window manufacturers.

This is an F-tab patio door roller assembly with a 1 inch concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is then captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 inch wide and 1-3/16 inch tall with a 7/8 inch dimple width. Used by Lupton and a variety of other sliding patio door manufacturers.

These plastic turn buttons are used to secure window screens, storm windows, and storm door panels. Accepts a #10 screw.

Replace or repair broken or missing sliding door rollers with the Prime-Line D 1754 tandem roller assembly, compatible with a variety of patio door brands. Featuring 1-1/2 inch concave steel ball bearing rollers in a durable stamped steel housing with a yellow zinc finish, this assembly delivers smooth, quiet operation and long-lasting performance. It includes a 1/4-20 mounting hole on the back and an optional #10/32 threaded hole on top for versatile installation. Perfect for DIY homeowners and contractors, installation is easy with a standard Phillips head screwdriver. Restore your sliding doors to effortless operation with this strong, reliable roller assembly.

these wheels work great on a 150 lbs door. they slide with no effort. Wayne. Egg Harbor Twp, NJ. Sun Jan 04 2026

This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a variety of other sliding patio door manufacturers.

This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide, 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and a #10-32 threaded optional use hole on the top. It is used by Daryl, Lenahan, Patio Magic and a variety of other manufacturers of sliding patio doors.

This is an F-tab patio door roller assembly with a 1-1/2 inch concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 inch wide and 1-5/8 inch tall with a rear adjusting screw. Used by Doormaster, Starlite and a variety of other patio door manufacturers.

This maximum security combination strike is constructed of stamped steel and it comes plated in a satin nickel finish. It features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. from center to center. This security strike is designed to replace the standard (separate) latch and deadbolt strike plates with a one-piece combo plate and up to 5 more screws for maximum security. Installation of this combo strike repairs and strengthens a locked door with six 3 in. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot hole drilling may be required for flush install.

Matched perfectly with our new door entry combo. Secure for sure. What a difference.. Anonymous. Sun Mar 08 2026

Use this Prime-Line Pella Spline Socket Casement Window Handle with Pella casement operators that have 3/8 inch diameter special deep splines. It fits other, similar-styled casement operators with 3/8 inch special deep splines and features a long-reaching arm for optimal performance. This spline socket crank handle features a sleek, arching, and contoured design to enhance the beauty of your window and provide an elegant finish to Pella casement windows. Made of durable diecast construction for lasting use, the window handle crank comes in a painted finish. It is engineered to resist rust and corrosion. This crank is easy to install. Plus, it has a set screw at the base of the handle allowing it to lock onto the spindle. The casement window crank handle replacement features a sleek, arching design with a unique 3/8 inch bore that fits the Pella special deep spline spindles. It has a 2-3/8 inch drop from the base bottom to the center of knob. For further dimensional information, please see the line drawing (not universal).

These roller assemblies are constructed of stamped steel housings and steel wheels. The housing features flared corners for better gripping power when inserted into the bottom rails of the sliding sash. The wheels feature concave (grooved) edges and are designed to glide over raised tracks. Roller assemblies like these are commonly used in showcase windows and display cabinets that are equipped with sliding glass or wood panels.

Product provided an exact replacement for my 70 year old windows. Should last longer than the nylon rollers included with the windows. Jeff. Pittsburgh Pa Metro. Tue Sep 09 2025

This is a window roller, flat edge, sliding, suitable for use with Adore Hilite sliding windows. This flat nylon constructed roller is used on adore highlight sliding windows. Nylon axle pins also act as a side guide. Installs two per window.

The Prime-Line N 7536 sliding closet door roller kit ensures effortless movement for your closet doors, providing a seamless sliding experience with durable, top-quality components. This closet door roller kit includes both front and back roller assemblies, offering easy bypass of your sliding doors to ensure a perfect alignment. Built to last, the sliding closet roller kit features sturdy stamped steel brackets and roller wheels, ensuring reliable performance and long-term durability. Designed for straightforward installation, this roller guide kit comes with all necessary hardware, making it simple to replace or upgrade your sliding closet door kit with minimal tools required. The Prime-Line sliding closet door guide kit is compatible with most standard closet doors. For further dimensional information, please see the line drawing provided

This is a sliding window in a black plastic housing with a flat-edged stainless steel ball-bearing roller. Features a stainless steel roller insert carrier.

Restore smooth, effortless operation to your sliding patio door with this Tandem Stainless Steel Roller Assembly. Designed with a unique bottom-mount housing, this roller assembly is commonly used on Andersen sliding patio doors and many other wood patio door brands. It is an ideal choice for homeowners and DIY installers seeking a durable replacement solution. The assembly includes two 1-1/2 inch concave stainless steel ball bearing rollers housed in a corrosion-resistant stainless steel frame. This construction provides strength, durability, and long-lasting performance, especially in coastal or high-humidity environments where rust and corrosion are common issues. The stainless steel housing measures 11/16 inch wide, 1-3/16 inches tall, and 4-5/8 inches long, with a mounting tab at each end for secure installation. It is designed to fit into a mortised pocket in the bottom rail of the door. For added convenience, the roller assembly features a side adjustment mechanism, allowing you to fine-tune the door height and alignment with a standard screwdriver. Whether you are repairing an Andersen sliding door or replacing worn rollers on another wood patio door, this stainless steel roller assembly provides a reliable and long-lasting solution to keep your door gliding smoothly. Please refer to the line art drawing for exact dimensions to ensure compatibility before purchasing, as this is not a universal part.

These roller assemblies are constructed of a stamped steel housing and feature a plastic, center grooved (concave) edge wheel. These types of roller assemblies are typically used on wood sliding windows and panels, and require a mortised installation. These roller assemblies fit Glide Master, and they are used by a variety of other manufacturers.

This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a variety of other sliding patio door manufacturers.

Increase garage security with the Prime-Line GD 52118 Inside Deadlock, designed to provide added protection when you need it most. Ideal for nighttime use or while away on vacation, this inside-operated lock helps prevent unauthorized entry by securing your garage door from the interior. It engages directly into the vertical track, creating a strong physical barrier for enhanced peace of mind. Built for durability, this garage door deadlock features a thick steel slide bolt paired with a heavy-duty galvanized steel housing. This rugged construction ensures long-lasting performance and dependable strength against forced entry attempts. The compact yet effective design fits most standard garage doors, making it a practical upgrade for residential security. Installation is quick and straightforward, requiring only a few basic tools and taking less than 30 minutes to complete. All necessary mounting hardware is included, making this a convenient do-it-yourself solution for homeowners looking to reinforce garage security without professional help. The slide bolt measures 7/8 inch wide by 1/8 inch thick, providing a secure fit while maintaining easy operation. Whether you're upgrading an existing lock or adding an extra layer of protection, this inside deadlock offers a simple and reliable solution. Be sure to review the line drawing to confirm compatibility with your specific garage door setup.

Deltana is an architectural hardware manufacturer with a proven record for exceptional service and quality. Deltana inventories America's largest selection of architectural and door hardware in over nine fine finishes made from solid brass, zinc, aluminum, steel, and stainless steel. With an array of fine finishes, find hinges, bolts, bumpers and stops, ball catch, roller latches, door accessories, and home accessories that compliment your home's decor. The Deltana bolts with concealed screws are a contemporary alternative to improve security and appearance.

Product appears to be well made but I haven't installed it yet.. Andy. Redlands, CA. Sat Mar 07 2026