116 In Diecast Window Screen Clips 8 Pack Primeline L 5833

These 1/16 in. plastic window screen clip are used to secure the window screen to the frame and is attached with a screw so that the clip can twist and latch over the screen frame. Easy to remove. Constructed of white molded plastic.

Hidden Deck Fasteners, Strong Hold and Seamless Finish:Compatible with most major brands, these black fasteners stay discreet for a clean, professional deck finish. Made of heat-resistant polypropylene and 304 stainless steel, they’re built to last in all weather conditions. A reliable choice for strong, long-term deck construction.

48" H x 0.31" W x 0.75" D

Easily build, repair, and replace missing or damaged window screen frames with this Prime-Line Window Screen Frame. The aluminum window screens frames may be used in combination with solar screen fabric (sold separately) to create effective sunscreens that mount on the outside of your windows to block most of the sun's hot rays from entering your home. The aluminum screen frame is constructed with a thicker spline channel for added support. With everything needed in this window screen frame kit to make brand-new window screen frames, you can easily replace one that is missing or damaged. Frame materials are straightforward to work with, easy to cut to size and assemble. The window screen frame replacement measures 5/16 inch x 3/4 inch. Please refer to the line-art for dimensional information and compare with your needs before purchasing.

These are 5/16 in. offset diecast screen clip, powder-coated bronze finish. Used to attach window screens to windows. Accepts a #10 screw.

These are perfect for hanging the board swings that I purchased from Wayfair. Cecilia. Mableton, GA. Mon Sep 30 2019

These are window screen stretcher clips with screws are constructed from stamped aluminum. They fit most 3/8 inch x 3/4 inch frame applications. Often used to attach your window screens to awning and other types of windows.

【3 PACK Suction Cup Clips Clamps for Glass-Windows-Refrigerator-Tile or any Smooth Surface】Perfect for using in bathroom, kitchen, living room, bedroom, closets, etc. You can easily adheres the suction cup to the smooth bathroom glass or tile, you can easily clip towel, bath loofah, brushes, cloth and more. 【Durable & Ideal Suction cup clip】Suction cup clip constructed of type 304 premium grade stainless steel, built to last 【Easy to stick and remove】Ensure surace is clean and smooth, enough to create air tightless. To remove, lift a corner, release pressure. Cup won’t leave marks or sticky residue! 【Measurements】Suction cups measure 1.77 inch in diameter. Clip is 1.9"w x 2.3" h 【Weight capacity 3.5 lbs】Reference product video link: https://youtu.be/VG28wZpOAGc. You can also search "15650 suction cup clip picture fridge display window mount notice sign Rebrilliant" on youtube to locate the video. You can also download video by following this link: http://www.Rebrilliant.com/video/15650.AVI

These window grid retainer pins are constructed of plastic bodies with steel needlepoint pins, and they come clear in color. They feature 5/8 in. long plastic shafts and 1/2 in. long plastic retainer sleeves, ideal for mounting mullion grids over the glass area of wood windows. These window grid retainer pins are used for securing decorative mullions to stationary and operating wood windows of all types and sizes. Sizes available from the manufacturer include the following; 3/4 in., 1-1/16 in., and 1-1/8 in.

These are extruded aluminum clips used to attach storm windows or screen panels to storm door frames with aluminum knurled head thumbscrews.

1.2" H x 2.55" W x 1.5" D, Satin Nickel

These chain door guards are constructed of steel chains, diecast housings, plates, and keepers, and they come in optional plated finishes. These locks engage by allowing the bolts to slide into the keyed mechanisms to lock. They use B1 keyways, ILCO (1098M). These chain door locks allow doors to open only slightly for safe viewing and ventilation. Installation of these locks mounted out of children’s reach will help prevent them from opening doors to enter or exit into dangerous or off-limit areas. All installation fasteners are included, and the locks can be used on a variety of door types, on or beside the door casings.

Very nice looking and useful key system to setup child lock even if you are going out.. Anonymous. US. Wed May 17 2023

These are diecast clips used to secure window screens, storm windows and storm door panels. Accepts a #10 screw.

Zinc Plated, 0.75", 4"

These screen clips are constructed from zinc diecast. They feature a 5/16 inch design perfect for low profile applications and include installation screws. These clips are used to attach your screen to your window opening. Easy to install in minutes with a few minor tools. All necessary fasteners will need to be purchased separately. Typically used on 5/16 inch screen frames.

6.6" H x 3.75" W x 1.95" D, Chrome

This Defender Security Swing Bar Door Guard will increase peace of mind when answering the door by allowing the door to be cracked open slightly for viewing. When engaged, a ball on the keeper interlocks with the bar lock and prevents an intruder from pushing their way through. We have improved upon the standard door guard design and added an innovative backup thumb turn security lock that blocks the release tool from disengaging the door guard latch. In cases of emergency, hotel security or emergency crews can pop the thumb turn off of the unit by applying approximately 100 pounds of force to the door. (Note that 100 pounds of force is much greater than a simple kick in, so the emergency release feature does not compromise your security.) Additionally, after the thumb turn lock breaks away, the unit still operates as a traditional swing bar door lock and a specially designed Anti-Lockout emergency access tool is required to swing the door guard out of place. To help prevent forced entry into your home, it is always a good idea to engage the backup thumb turn lock whenever you are not actively using your door.

Great. Searched a long time and in many places to find this.. Donald. Owen Sound, ON. Tue May 10 2022

These are white plastic constructed clips used to attach screens or storm windows to openings in a flush mounting. Feature the double wing.

These are stamped aluminum clips for attaching window screens to awnings and other types of windows. Commonly used with 3/8 in. x 3/4 in. screen frame.

Purchase your all in one clips in bulk. These clips hold light bulbs easily and securely on most home gutters and shingles. Damage free solution for outdoor lights around the home.

These replacement hardware packs are for use when installing or repairing Prime-Line part MP4013 security bar locks, for patio sliding door security. All fasteners, brackets and miscellaneous installation hardware are included with this item. See manufacturer’s how-to video for detailed instructions, including how to install when the active panel slides on the exterior side of the home.

Works as advertised, definitely secures bar.. Carlos. Succasunna, NJ. Mon Jul 25 2022

These screen clips are constructed from gray plastic. They feature a 1/16 inch design perfect for low profile applications and include installation screws. Clips are used to attach your screen to your window opening.

Allows for maximum screen coverage on standard 30 to 36-inch sliding screen doors. Proper installation of the grille adds strength to the entire door and helps prevent screen fabric damage. Molded plastic grille body measures 26-1/8 inch wide x 20 inches tall. The tabs extend 4-1/8 inches and can be easily trimmed.

This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

3/8 in

This is a shower door bottom seal that is constructed of clear vinyl and comes in 36 in. lengths. Designed to attach to the bottom of frameless, swinging shower doors without the need of adhesives. Cutting down to size will be necessary if your shower door measures less than 36 in. in width. No tools are required to install this shower door bottom. For an alternate design, please review the Prime-Line.

what I needed, Solved my problem, I need receipts for the items that I purchased where can I go on line to print them out Thank You. Daniel. Martinez, CA. Sat Feb 21 2026

Hang your Holiday lights with ease with these clips.

Prime-Line part F 2929 contains a pair of spring-loaded Tilt Latches and easy-to-follow installation instructions. These tilt latches install on single- and double-hung vertical sliding, tilt-in vinyl sash panels. Vertical sliding windows with tilt-in sash allow for easier cleaning of hard-to-reach exterior glass surfaces.Each latch is constructed of durable .283V plastic and they are equipped with corrosion-resistant, long-lasting steel springs. These latches keep each vertical sliding panel locked into their respective paths of travel. Simultaneous disengaged latches allow the sash to tilt inward for thorough cleaning, or tilted in then rotated clockwise or counter-clockwise for easy removal of the sash from window frame.Prime-Line tilt latches like these are used in North Carolina and other states. Each package includes one right-hand and one left-hand latch. These latches are used by many to replace damaged or missing tilt latches and they are easy to install.

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

Silver

Upgrade your storm and screen door latching system with the Prime-Line K 55177 Interior Latch, designed for versatility, durability, and a secure fit. offer long-lasting performance while enhancing your door hardware. The set includes brown screws ensuring the perfect fit. Designed for use with similar inside latches. For added convenience, installation fasteners are included for a quick and hassle-free setup. Choose the Prime-Line K 55177 for a secure, reliable, door latching solution.

These are extruded aluminum clips used to attach storm windows or screen panels to storm door frames with aluminum knurled head thumbscrews. The knurled head allows for a quick and easy installation of these clips, no tools are needed. They have a 5/16 in. offset, a 1 in. length, and are 1/2 in. wide. Each package contains 8 storm panel clips. If you choose to use a wrench to tighten these use caution and do not over tighten.

This window screen plunger latch is constructed from nylon. It features a spring-loaded design and has a 1/8 in. diameter. These latches are used on aluminum screen frames.

Very cheap breakable plastic part.. Oleg. Newton Highlands, MA. Tue May 05 2026

This patio sliding screen door grille is constructed of aluminum and comes in a white painted finish. The grille is designed to install on the exterior side of 48 in. Wide sliding screen doors to provide child safety, and protect the screen fabric from pet damage. This screen door grille measures 26 in. Tall, and with the fasteners and installation instructions provided it is simple to install. This maintenance-free grille is constructed of superior quality using close weave aluminum mesh supported by strong, extruded aluminum frame material in an attractive styling.

High quality screen door grill. Had to trim mounting tabs on one side to allow the screen to fit into the frame recess.. Edward. Meadow Vista, CA. Sun Jun 22 2025

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

These make-2-fit window grid retainer pins are constructed from clear, durable plastic. The clear plastic construction allows them to blend and hide better with the window's finished surface. Each retainer features a steel-constructed pin secured in the center of the plastic shafts and helps to hold the window mullion grids onto the window frames. Included in each package are the retainer pins, and the pin bushing cups to allow for quick and easy installations. Use these window grid retainer pins on crank-out or push-out casement, awning, and hopper-type windows, on single and double-hung vertical sliding windows, and on fixed and horizontal sliding windows.

These window-screen flush clips are constructed of plastic and come white in color. These clips feature a flush-fitting design that can be used with aluminum screen frames on windows of various types. Plastic clips like these are also used to secure window screens, storm windows, and panels of storm doors. These plastic screen clips are easy to install and are used by many. All the necessary fasteners are included for a quick and easy installation.

Aluminum, 4.5", 6.25"

These screen clips are constructed from zinc diecast. They feature a 5/16 inch design perfect for low profile applications and include installation screws. These clips are used to attach your screen to your window opening. Easy to install in minutes with a few minor tools. All necessary fasteners will need to be purchased separately. Typically used on 5/16 inch screen frames.

This panel clip has a 1/16 inch tip that allows for secure attachment of storm windows or screen panels to storm door frame with screw. Made of a white nylon there are one thousand per tub. (Attachment screws are sold separately)

This 1,000-piece pack of aluminum screen clips (screws sold separately) offers a comprehensive solution for securing window and door screens in residential, commercial, and high-volume maintenance settings. Manufactured from durable, corrosion-resistant aluminum, each clip holds screens firmly in place while providing a clean appearance. Perfect for screen replacement jobs, property managers, or large projects—this bulk pack delivers both convenience and value, making it easy to maintain multiple units efficiently without sacrificing quality. Screws and fasteners are not included.

These are extruded aluminum clips used to attach storm windows or screen panels to storm door frames with aluminum knurled head thumbscrews.

Prime-Line part F 2936 contains a pair of spring-loaded Tilt Latches and easy-to-follow installation instructions. These tilt latches install on single- and double-hung vertical sliding, tilt-in vinyl sash panels. Vertical sliding windows with tilt-in sash allow for easier cleaning of hard-to-reach exterior glass surfaces.Each latch is constructed of durable 0.248 plastic and they are equipped with corrosion-resistant, long-lasting steel springs. These latches keep each vertical sliding panel locked into their respective paths of travel. Simultaneous disengaged latches allow the sash to tilt inward for thorough cleaning, or tilted in then rotated clockwise or counter-clockwise for easy removal of the sash from window frame.Prime-Line tilt latches like these are used in Pennsylvania and other states. Each package includes one right-hand and one left-hand latch. These latches are used by many to replace damaged or missing tilt latches and they are easy to install.

These spring steel retainer clip hold 3/8 inch screen frame into aluminum window channel. They come in a bright steel finish.

White

These screen clips are constructed from zinc diecast. They feature a 5/16 inch design perfect for low profile applications and include installation screws. These clips are used to attach your screen to your window opening. Easy to install in minutes with a few minor tools. All necessary fasteners will need to be purchased separately. Typically used on 5/16 inch screen frames.

Easy to install. This type of plunger is used to hold aluminum frame screens into window frames.

This panel clip has a 1/16 in. tip that allows for secure attachment of storm windows or screen panels to storm door frame with a screw. Made of white nylon.

These are retainer clips constructed from spring steel. Used to hold screen frame onto aluminum window channel. 13/16 inch length and 3/8 inch width.