LED Flush Mount

Features

• Light is designed to be fully functional for most conditions, operating temperature range is: 4°F to 125°F; the weatherproof rating is IP43, class 2
• Doppler/microwave sensor can detect motion through most non-metallic blocking obstacles (walls, curtains, glass/windows), and when movement is detected the light comes on without any delay even before entering into the space that is being illuminated
• Doppler sensing technology provides outstanding motion sensing performance and unlike standard PIR motion detection it is effective in sensing changes in ambient temperature
• Smart sensing profile can be set for on-off, delay PR adjustable dimming level saving modes
• Sensor does not detect any motion in the covered area after the pre-set delay timing window then it can be set to either "completely turn off" or "gradually dim the lighting" to the selected pre-set illumination level by 5%-30% of full brightness
• Standard lighting operation - it can be used for new AC lighting installations or to replace existing outdated light fixtures or lamps as a standard on-off switch controlled light and also for AC power applications that provide continuous illumination
• Dusk to dawn - can provide all night safety/security lighting; it has a built-in adjustable ambient light photo sensor that automatically turns the light on to a pre-set lighting level when it senses a change in ambient lighting
• When operating at the pre-set dusk to dawn lighting level if motion is sensed then the motion sensor/switcher and timer will activate it to full brightness
• eSenLite brand green energy smart lights are highly reliable and user friendly, they are affordable and offer unlimited practical uses for residential, commercial, industrial, recreational, indoor and outdoor (limited condition) applications
• Light has 180 SMT LEDs and the light dome cover is made of reinforced molded plastic
• AC power source requirements can be from:100-240-Volt/AC, 50/60Hz
• Load: 18-Watt, detection range/sensitivity: 3-53 ft. / 1-16 m x 360° Dia at 6-10 ft. H, doppler sensor frequency: 5.8 GHz, delay rime range setting: 8 seconds to 12 minutes
• Ambient light level setting: 10-2000lux (dusk to dawn illumination) RF sensing power: less than 0.3mW
• eSenLite brand smart lights are designed, developed, engineered and QC'd in the USA and our California corporate office provides customer care and technical support
• * Check Out More Items From eLEDing: https://mailchi.mp/eesgi/eesgi *