Thin (.1"-.2") Walnut Wall Paneling

Bring the natural warmth of wood grain to any room with our peel and stick PET wall panels. Made from flexible, premium PET material with a realistic wood grain pattern and matte finish, these waterproof panels resist moisture, warping, and mildew—ideal for bathrooms and kitchens. The ultra-flexible design bends smoothly around curves, columns, and corners for seamless accent walls, wainscoting, or ceiling upgrades. Easy install: just peel, stick, and trim. Removes cleanly, perfect for renters.

I loved that product it’s one of the best. I highly recommend it—I’ll be buying more to keep decorating my home.. Anonymous. Mon, 12 Oct 2026

This unfinished veneer tambour wall panel has 3/4 in. wide 30-degree groove slats on a flexible canvas backer, so the sheet bends at the slat joints to a minimum radius of 2 inches. It is available with a real Maple, Red Oak or White Oak wood veneer face over an MDF core. It is produced internationally from North American hardwoods. The grooves between the slats come in natural or black. It is sold by the sheet in 4 ft. and 8 ft. lengths, and each unit is one sheet of the length you select: a 4 ft. x 8 ft. sheet covers about 32 square feet and a 4 ft. x 4 ft. sheet covers about 16 square feet. Each sheet is 5/32 in. thick, with a nominal 4 ft. width (actual 47-3/4 in.). It is ready to stain, paint or clear coat, and works on flat or curved walls, ceilings, wainscoting, columns, bar fronts, drawer fronts and tambour doors. Install with construction adhesive and finishing nails, and trim with a fine-tooth saw or utility knife. For indoor use only. Sheets from one order may ship together in one carton, so you may receive fewer cartons than sheets.

Haven’t installed it yet but it’s beautiful out of the box.. Kelly. Bonsall, CA. Thu, 29 Oct 2026

Model NEV-331-MP-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 32 in. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real Maple veneer. Each sheet covers approximately 10.67 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 2 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 0.75 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-331-MP-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 7.33 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Commomy 3D Faux Brick Peel and Stick Wall Panels offer a fast, affordable way to transform any wall. Each weight PVC panel features a realistic brick texture that adds warmth and depth to your home décor. Waterproof, heat-resistant, and easy to cut — simply peel and stick to upgrade your kitchen, living room, or fireplace instantly. A perfect DIY-friendly wall solution for renters and homeowners alike.

We did our backsplash in our kitchen with this. Easy to apply. Looks great and is nice quality. Very pleased.. Lauren. Slippery Rock, PA. Sun, 22 Feb 2026

Model NEV-231-WAL-4 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 4 ft. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real Walnut veneer. Each sheet covers approximately 16 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 1 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 0.5 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-231-WAL-4 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 11.5 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NEV-331-WO-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 32 in. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real White Oak veneer. Each sheet covers approximately 10.67 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 2 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 0.75 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-331-WO-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 6.67 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NEV-331-WO-BK-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 32 in. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real White Oak veneer. Each sheet covers approximately 10.67 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 2 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 0.75 in. wide slats, accented with black V-grooves for added depth and contrast, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-331-WO-BK-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 8.34 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NEV-331-WO/C-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 32 in. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real White Oak veneer. Each sheet covers approximately 10.67 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 2 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 0.75 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-331-WO/C-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 6.67 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-373-WAL-4 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 4 ft. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Walnut. Each sheet covers approximately 4 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-WAL-4 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 5 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NEV-231-WAL is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 8 ft. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real Walnut veneer. Each sheet covers approximately 32 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 1 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 0.5 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-231-WAL for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 23 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-373-RO is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 8 ft. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Red Oak. Each sheet covers approximately 8 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-RO for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 7 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NEV-431-RO-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 32 in. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real Red Oak veneer. Each sheet covers approximately 10.67 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 3 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 1 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-431-RO-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 7.67 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-373-WAL is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 8 ft. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Walnut. Each sheet covers approximately 8 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-WAL for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 10 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-373-WAL-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 32 in. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Walnut. Each sheet covers approximately 2.67 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-WAL-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 3.35 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Transform your walls with Commomy 3D Faux Brick Peel and Stick Panels. Featuring a farmhouse-inspired brick texture in a smaller brick pattern, these ultralight PVC panels add charm and warmth to any space. Lightweight yet durable, they are waterproof, heat-resistant, and renter-friendly—simply peel and stick to upgrade your living room, bedroom, kitchen backsplash, or fireplace in minutes.

Introducing the unfinished maple veneer decorative tambour panel, the perfect solution for adding a touch of elegance to any space. Featuring a versatile design with flat 3/4" wide slats and 30-degree V-grooves, this panel is suitable for use on walls, ceilings, wainscoting, pole wraps, bar fronts, drawer fronts, and tambour doors. The flexible and bendable tambour sheet allows for curved applications with a minimum radius of 3 inches, giving you even more options to create a unique look. This tambour panel is customizable to your liking, thanks to its unfinished wood veneer, ready to be stained, painted, or clear-coated. The panel is easy to install by applying construction adhesive to the flexible paper backer and mounting the panel to your surface. It can be trimmed with a fine tooth saw or cut length-wise with a utility knife for a perfect fit. Constructed with high-quality maple wood veneer and an MDF core, this panel is made in the USA, ensuring long-lasting durability. The panel size is true 8 ft. (96 in.) high x 4 ft. wide x 5/32 in. thick, making it a great fit for many different spaces. Elevate your space with the unfinished maple veneer decorative tambour panel.

Art3d brick 3d wall panel is made of a self-adhesive substrate topped with environmental PE-LLD material, peel and stick installation, easy do it yourself. The embossed 3d wall sticker offers a stunning visual impact. the tiles are light, waterproof, anti-collision, they can be installed in minutes over a clean and sleek surface without any mess or specialized tools, and never crack with time.Peel and stick 3d wallpaper is also an economic wall covering material, they will remain on your walls for as long as you wish them to be. The tiles can also be easily installed directly over existing panels or smooth surfaces. The tiles are resistant to the heat and the humidity of bathrooms (do not use in fire environment or shower).

I bought these not sure what color I was going for in my laundry room. The box was man handled in shipping but everything was fine inside. These were the best priced and I’m very happy with the results the adhesive is very strong and I used grout after applying them to the walls to get a more distressed look.. Anonymous. Sat, 29 Aug 2026

Create a stunning natural stone look without heavy materials or high costs. Commomy 3D Faux Stone Panels are lightweight, waterproof, and easy to apply—just peel and stick! Perfect for any room that needs a quick and stylish refresh.

These wall panels are beautiful and exactly as described in the picture. We haven’t installed them yet but they look like they are so easy to work with! I will update with a picture when we get the project finished.. Rc418. US. Sat, 21 Feb 2026

DescriptionTransform your living spaces with these self-adhesive waterproof wall stickers featuring a stunning marble effect design. Perfect for kitchens, bathrooms, and other areas, they offer a stylish and practical solution for enhancing walls and tiles. The XPE foam material allows lasting beauty while resisting humidity and wear.Features- Color: Golden-Material:XPE foam- Size: 60.00X30.00X0.25cm/23.58X11.79X0.10in -Waterproof and moistureresistant: designed to effectively block humidity, these selfadhesive marble effect wall stickers are perfect for kitchen and bathroom wall decoration-Elegant marble pattern: the realistic marble design wall panel enhances the aesthetic appeal of your space, creating a luxurious and sophisticated atmosphere effortlessly-Easy selfadhesive installation: no need for professional tools; simply peel and stick for a quick and hasslefree home makeover-Strong adhesion for durability: this backsplash for kitchen wall features a powerful adhesive that allows lasting application, reducing the need for frequent replacements-Easy to clean and maintain: resistant to wear and stains, these shower wall panels can be wiped clean effortlessly, keeping your walls looking fresh and new

Nice inexpensive way to decorate on a budget. James. Wed, 20 May 2026