Solid Wood Thin (.1"-.2") Wall Paneling

Model NES-373-WAL-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 32 in. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Walnut. Each sheet covers approximately 2.67 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-WAL-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 3.35 lbs. per sheet, it is easy for one installer to handle and fast to finish.

These exciting planks are made from sustainable North American white oak. These planks offer a super easy-to-use peel-and-stick installation method and are available in four super exciting colors. Start transforming your space with planks today.

Still working on it but it’s so beautiful will buy again once in stock. Maleasa. Evansville, IN. Sat Jul 05 2025

Model NES-373-WAL-4 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 4 ft. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Walnut. Each sheet covers approximately 4 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-WAL-4 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 5 lbs. per sheet, it is easy for one installer to handle and fast to finish.

These exciting planks are made from sustainable North American white oak and Clark Island Pine. These planks offer a super easy-to-use peel-and-stick installation method. Start transforming your space with planks today.

Very easy to use! Better quality than I thought!. Kim. VA. Mon Aug 22 2022

Timberchíc is the only wall plank company that’s also better for the planet. We never cut down healthy trees, meaning we don't touch the famous, untapped forests in our home state of Maine. We never repurpose or recycle old wood that's been used in buildings, homes, or industrial facilities either, meaning our wood is fully intact without any exposure to chemicals like asbestos or lead paint. Our wood is 100% river-reclaimed from the depths of the Penobscot River, meaning it's as fresh and full of potential as the day it was cut so many decades ago. In fact, our recovery efforts keep 1,000 acres of forest from being cut a year. With Timberchíc you'll not only love the look of your new room, but you can rest assured you're doing your share in giving back to the planet.

Very nice quality, added warmth to basement wall. Easy to install.. Anonymous. US. Fri May 01 2026

Model NEV-331-MP-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 32 in. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real Maple veneer. Each sheet covers approximately 10.67 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 2 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 0.75 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-331-MP-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 7.33 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-373-MP-4 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 4 ft. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Maple. Each sheet covers approximately 4 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-MP-4 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 3.5 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NEV-331-WO-BK-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 32 in. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real White Oak veneer. Each sheet covers approximately 10.67 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 2 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 0.75 in. wide slats, accented with black V-grooves for added depth and contrast, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-331-WO-BK-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 8.34 lbs. per sheet, it is easy for one installer to handle and fast to finish.

These exciting Timber Chic planks are made from sustainable North American red pine. These planks offer a super easy-to-use peel-and-stick installation method and are available in four super exciting colors. Start transforming your space with Timberchic planks today.

Very light, easy to install, great look. We did an accent wall in two roomw. Would buy again (did!). thank you.. Catherine. Cedar Springs, MI. Thu Oct 15 2026

Model NES-373-RO is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 8 ft. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Red Oak. Each sheet covers approximately 8 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-RO for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 7 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NES-373-WAL is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 1 ft. x 8 ft. 60-degree grooved flat slat wood tambour wall panel crafted from solid North American furniture-grade Walnut. Each sheet covers approximately 8 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 7.5 in. minimum radius. The 60-degree grooved flat slat profile stands 3/16 in. proud of the backer with 0.75 in. wide slats and 16 slats per panel, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NES-373-WAL for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 10 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Natural Bamboo - Made from real bamboo, showcasing beautiful natural grain patterns and warm organic tones

Natural Bamboo - Made from real bamboo, showcasing beautiful natural grain patterns and warm organic tones

Model NEV-231-WAL-4 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 4 ft. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real Walnut veneer. Each sheet covers approximately 16 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 1 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 0.5 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-231-WAL-4 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 11.5 lbs. per sheet, it is easy for one installer to handle and fast to finish.

These exciting Timber Chic planks are made from sustainable North American red pine. These planks offer a super easy-to-use peel-and-stick installation method and are available in four super exciting colors. Start transforming your space with Timberchic planks today.

The wood paneling is light weight and easy to apply. The color is very blond with natural knots on the pieces. The size of the panels makes it easy to apply and thin enough to cut if needed. There are two strips of sticky tape on the back of each panel.. Anita. Tampa, FL. Sat Apr 10 2021

Natural Bamboo - Made from real bamboo, showcasing beautiful natural grain patterns and warm organic tones

Model NEV-331-WO-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 32 in. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real White Oak veneer. Each sheet covers approximately 10.67 sq. ft. and is built on a bamboo fiber reinforced paper backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 2 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 0.75 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-331-WO-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 6.67 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Natural Bamboo - Made from real bamboo, showcasing beautiful natural grain patterns and warm organic tones

Natural Bamboo - Made from real bamboo, showcasing beautiful natural grain patterns and warm organic tones

Model NEV-231-RO-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 32 in. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real Red Oak veneer. Each sheet covers approximately 10.67 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 1 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 0.5 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-231-RO-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 6.67 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NEV-331-WO/C-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 32 in. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real White Oak veneer. Each sheet covers approximately 10.67 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 2 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 0.75 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-331-WO/C-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 6.67 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Natural Bamboo - Made from real bamboo, showcasing beautiful natural grain patterns and warm organic tones

Model NEV-231-WAL is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 8 ft. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real Walnut veneer. Each sheet covers approximately 32 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 1 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 0.5 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-231-WAL for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 23 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Model NEV-431-RO-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 32 in. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real Red Oak veneer. Each sheet covers approximately 10.67 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 3 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 1 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-431-RO-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 7.67 lbs. per sheet, it is easy for one installer to handle and fast to finish.

Timberchíc is the only wall plank company that’s also better for the planet. We never cut down healthy trees, meaning we don't touch the famous, untapped forests in our home state of Maine. We never repurpose or recycle old wood that's been used in buildings, homes, or industrial facilities, meaning our wood is fully intact without any exposure to chemicals like asbestos or lead paint. Our wood is 100% river-reclaimed from the depths of the Penobscot River, meaning it's as fresh and full of potential as the day it was cut so many decades ago. In fact, our recovery efforts keep 1,000 acres of forest from being cut a year. With Timberchíc you'll not only love the look of your new room, but you can rest assured you're doing your share in giving back to the planet.

Super happy with the way our feature wall turned our in the water closet! Aside from the water line area, cutting the wood was easy - rounded, more technical cuts were a bit challenging with the thinness of the boards. The final product is better than we anticipated. Will update pics when bathroom is complete!. Christina. Golden, CO. Mon Jul 25 2022

100% Reclaimed redwood planks (never fake made to look old, no two boards are alike). Offered in peel & stick (indoor only) or tongue & groove (indoor or outdoor). Naturally preserved: Naturally aged; the finish simply can’t be duplicated. Introduce the pacific northwest's majestic redwoods into your home or office. Bella colors: Naturally aged previously painted or stained planks, adding a whimsical effect and unique look to any project. Beautiful on your wall, ceiling, furniture, backsplash, and more! Enjoy an easy installation with a one-of-a-kind designer finish!

Great product!! Love this and will purchase on another product!. Victoria. Lake Mary, FL. Sat Jul 22 2023