Spoke Wheel Design Standard Single Track Non-Bypass Single Barn Door Hardware Kit

Features

• This kit only includes hardware, the door(s) are not included.
• Track 8ft and under is only one piece track. For the one piece bar, the spacing between two mounting holes is 16 inches. Track 9ft and above are connected by 2 or 3 tracks using a junction plate, so the spacing between the holes where the bars connect is not 16 inches, and a header board is needed.
• The hardware package only has lag bolts for wooden walls/drywall.
• If you have a door trim, please put a header board that is as thick as the trim and then attach the rail to the header board.
• You need to have at least 8" of space between the top of the door to the ceiling to accommodate the hardware.
• Two hangers are used to hold one door. For a single-door kit, there will be two hangers in the package. If you have a door that is either too wide or too heavy, then you can purchase additional hangers for that door.
• Premium black rustic carbon steel, heavy-duty, total door(s) weight up to 220 lbs. High-quality nylon wheels ensure minimal noise.