5 GAL Solvent Based Brown-Tinted High Gloss Solvent Based Acrylic Exposed Aggregate Concrete Sealer

Features

• Will darken the surface to make it look wet, bringing out any dull and faded coloring
• Brown-tinted transparent protective surface film will reduce damage and deterioration caused by water absorption and surface abrasion
• Protective surface film will reduce the growth of mold, mildew, and algae on the surface
• When properly applied, the Armor AG BROWN SEAL can provide up to 1-3 years of life on an exterior surface before the need to recoat, and up to 2-7 years of life on an interior surface.
• Breathable, UV resistant, made in the USA
• Coverage: Porous Surfaces: Up to 175 FT2/gallon in one coat.Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat.Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance.
• Application: The Armor AG BROWN SEAL can be applied with a 3/8-1/2” nap roller, or an acetone/solvent resistant HVLP sprayer with Viton seals. For a consistent wet look and high gloss finish, apply two coats spaced 24 hours apart. Product should be applied in the late afternoon/early evening when air and surface temperatures are declining. The Armor AG Brown Seal is designed for use on unsealed exposed aggregate concrete, or exposed aggregate previously sealed with a solvent based sealer. Not for use on any other materials.
• VOC Regulations: This product is 700 VOC and can be shipped to every state except AZ, CA, CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, NY, OH, PA, RI, UT, VA. If you live in a restricted state, please consider the Armor AR500 350 VOC or Armor AR500 50 VOC.