Steel Standard Single Door Barn Door Hardware Kit

Features

• The distance from the top of the door to the ceiling should be at least 6 inches.OUR TRACK IS NOT A WHOLE PIECE！
• Fit for door panel thickness: 1-1/2" to 1-3/4". If your door thickness is not within this range, please contact us, and we will provide you with suitable bolts.
• Usually, we recommend the track length should be at least 2 times the door's width or the opening. For example, if the door is 30'' wide. You will need 2 * 30'' = 60'' long track. Or if you have an opening that is 30'' wide, you will need at least a 60'' long track.
• All tracks are pre-drilled holes, and the spacing between each hole is American standard 16''.
• Packing list: Track; Roller; Spacer； Floor guide； Anti-jump pads； Door stopper； Connector. only the hardware is included and THE DOOR IS NOT INCLUDED!!!
• The hardware kit is suitable for door widths from 1 3/8 - 1 3/4.
• If the studs don't line up with the pre-drilled holes in the rail or if there is a doorway trim, we recommend you install a header board. You will need 6" clearance from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly.