Ceramic Impressions 25" Single Bathroom Vanity Top

Features

• Raised outer edge helps contain water and prevents items from rolling off the vanity top
• Faucet, drain assembly, p-trap, shut-off valve, and supply lines are sold separately.
• How to Install: To begin, take the entire countertop off of the vanity and turn it upside down onto a towel on the floor (this prevents countertop scratching). Next, rest the sink over the cutout on the counter and make sure the sink is centered with the drain hole and evenly spaced between bolt holes. Then, with a pencil, create an outline of the sink on the countertop and apply a 0.25" layer of silicone on the rim of the sink. Carefully place the sink upside down on the countertop and position it within the outline you drew. Lastly, attached the sink clips snugly and then carefully lift and place the counter and sink onto your vanity. Connect your faucet, drain, p-trap and supply lines.
• Remember that undermount sinks are typically set back 2"-2.5" from the front of the counter.
• Undermount sinks are mounted from below the countertop, so before beginning installation, check to make sure the countertop is 1/2"-1" thick.