Steel Single Bypass Single Door Barn Door Hardware Kit

Features

• The singletrack bypass allows your beautiful barn doors to slide bypass with each other on just one track. Step by step instructions will be included with fractional measurements concise word instructions with pictures.
• 8ft above is connected by two tracks using a junction plate, thus, the spacing between the middle 2 holes.
• Specific bolts are required for concrete walls. The hardware package only has lag bolts for wooden wall or drywall. Thinner or thicker doors require the correct length of the hex bolts. Thicker doors also require spacer extensions which will extend the track further from the wall to fit the thicker door. If there is a door trim a thick header board will be needed for the hardware to be attached. There needs to be a clearance between the top of the door to the ceiling for the single track bypass hardware kit.