Notes: Manual measurement has been used, there may be some reasonable error. All the pictures are taken by actual samples, slight chromatic aberration may occur due to lighting or display.
Assembly Required:
1. Put half of all screws into the corresponding screw holes, and tighten them after making sure all the screws are aligned with the screw holes.
2. Please do not over-tighten nuts, as this may cause distortion or breakage.
Product care:
Clean periodically with a soft bristle brush using tepid water and a mild liquid detergent. Avoid abrasive cleaners. Please note that it is important that the furniture is dried and does not remain wet for any length of time.
