Skip to Main Content
Sign In
Sign In

Saloniture

31 Results

Sort by
Recommended
Metal 4 Compartment Hair Tool Holder

Metal 4 Compartment Hair Tool Holder

by Saloniture

$40.99

Rated 4.5 out of 5 stars.6 total votes

Free shipping

This convenient salon appliance caddy is designed to hold and organize blow dryers, heat irons, straightening irons, curling irons, hot combs and other accessories. Both space saving and portable, it can be moved where needed throughout your salon, or brought to client meetings to create a professional workspace. It has a down-curved lip (covered in protective rubber) on the back as well as a hook and loop fastener strip, allowing it to be hung from and fastened to salon carts and cabinets with indented grooves on their upper edges. It also includes an optional table clamp that can be added onto the rear of the unit with two included screws. The clamp is tightened to the underside of a table by turning a dial, and can be mounted to surfaces up to 1-3/4" thick. A 2-3/4" (Dia) bottomless storage ring allows you to quickly stow and retrieve your blow dryer, including those fitted with nozzles or other attachments. It can also fit and store almost any flat or round hair iron and includes 3 storage tubes measuring 1-3/4" (Dia) x 3-7/8" (D). This appliance holder is extremely durable; constructed from high-grade steel in a heat resistant, black powder coat finish, it is very attractive and will last for years and years. Overall Dimensions: 11" (L) x 4" (D) x 4.5" (H). With clamp attached: 4-3/4" (D) x 5.5" (Height when fully closed) / 8.25" (Height when fully opened).

  • Overall Height - Top to Bottom: 4.5''
  • Overall Width - Side to Side: 4''
  • Overall Depth - Front to Back: 11''
  • Mounting / Installation Type: Drill and screw mount
  • : Hair Tool Holder
Opens in a new tab
Mobile Equipment Cart & Salon Trolley

Mobile Equipment Cart & Salon Trolley

by Saloniture

$101.99

Rated 4 out of 5 stars.16 total votes

FREE Fast Delivery

FREE Shipping

Mon. May 11

This multipurpose trolley is perfect for beauty salons, tattoo shops, pet groomers, nail technicians, and other professionals looking for a utility cart with tons of storage and an attractive, accessible design. Four non-marring swivel casters allow the trolley to be positioned close to your working area, and a push handle is located on one end of the cart. The trolley body and drawers are molded from high-quality black plastic that is strong, good-looking, and durable; it will last a long time. The surfaces are chemical resistant and extremely easy to clean. This cart includes five slide-out drawers, each measuring 13" long, 9" wide, and 2-3/4" deep. Each drawer is fully removable, and their tracks are beveled at the ends to prevent them from opening accidentally during trolley movement. The drawers are interchangeable and can be moved between any of the five drawer tracks. On the top of the trolley are two grooves (one on each side), each designed to receive and hold one of the pullout drawer trays. This allows you to remove one or two of the drawers and suspend them on each side of the trolley (in a "wing" or "T" formation). The top tier features several recessed compartments. There are two 4-1/4" diameter compartments and two side compartments both 13" long and 2-3/4" wide (4-3/8" wide at the center); all are 1-3/4" deep. There are five round openings at the end of the cart to hold accessories or tools: two openings 2-3/8" in diameter, and three 1-3/16" in diameter. Overall Dimensions: 19-1/2" long, 12-1/2" wide, and 32-1/2" tall. The width of this unit expands to 32-1/4" when two drawers are suspended from the top sides. Simple and quick assembly with no tools required; all parts are interlocking and snap together. Instructions are included.

  • Product Type: Utility Cart
  • Overall Dimensions: 32.5'' H x 12.5'' W x 19.5'' D
  • Overall Product Weight: 8lb.
  • Drawers Included: Yes
  • Wheels / Casters Included: Yes
Opens in a new tab
30-Day Low Price

34'' H x 16.5'' W Utility Cart with Wheels

by Saloniture

$169.99

Rated 4.5 out of 5 stars.8 total votes

FREE Fast Delivery

FREE Shipping

Mon. May 11

This rolling accessory trolley is an ideal solution for beauty salons, tattoo shops, nail technicians, pet groomers, and others who require a cart that provides plenty of compartments for the storage of tools and equipment. It features four slide-out drawers that each measure 13-3/4" deep, 9-3/4" wide, and 2-3/4" tall for ample storage room. Integrated stops keep the drawers from sliding out accidentally during trolley movement. Each drawer is easily removable and transferrable to any of the six-drawer tracks on the trolley for customization of the trolley's storage design. Two side pockets measuring 13-1/2" long, 3" wide, and 5" deep provide further storage space. Chrome, metal-wire holders are located under the pockets and allow for convenient storage of bottles and other tall items. The trolley rests on four, smooth-rolling swivel casters for easy mobility around the work area. A textured work surface is included on top of the trolley; the surface is recessed to provide a barrier in case of spillage. Two grooves on top of the trolley are designed to receive or hold included drawers, allowing the user to expand the work surface. A removable 3" diameter chrome ring is included to hold a blow dryer or another appliance. It also features three round openings (1-1/16" diameter each) and three rectangular slots (1-1/4" each) to hold various accessories and materials. Pull-down, lockable cover secures the trolley's contents (includes two numbered keys). The trolley measures 16-1/2" wide, 15" deep and 34" tall (width expands to 33-1/2" when the top surface is expanded). You'll receive the trolley with wheels, four drawers, two keys, an assembly tool, and instructions.

  • Product Type: Utility Cart
  • Overall Dimensions: 34'' H x 16.5'' W x 15'' D
  • Overall Product Weight: 15lb.
  • Drawers Included: Yes
  • Wheels / Casters Included: Yes
Opens in a new tab
30-Day Low Price

Metal 3 Compartment Hair Tool Holder

by Saloniture

$47.99

Rated 4 out of 5 stars.3 total votes

FREE Fast Delivery

FREE Shipping

Mon. May 11

This convenient salon appliance caddy is designed to hold and organize blow dryers, heat irons, straightening irons, curling irons, hot combs, and other accessories. Both space-saving and portable, it can be moved where needed throughout your salon, or brought to client meetings to create a professional workspace. It has a down-curved lip (covered in protective rubber) on the back as well as a hook and loop fastener strip, allowing it to be hung from and fastened to salon carts and cabinets with indented grooves on their upper edges. It also includes an optional table clamp that can be added onto the rear of the unit with two included screws. The clamp is tightened to the underside of a table by turning a dial, and can be mounted to surfaces up to 1-3/4" thick. A 2-3/4" (Dia) bottomless storage ring allows you to quickly stow and retrieve your blow dryer, including those fitted with nozzles or other attachments. It can also fit and store almost any flat or round hair iron and includes 2 storage tubes both measuring 1-3/4" (Dia) x 3-7/8" (D). This appliance holder is extremely durable; constructed from high-grade steel in a heat-resistant, black powder coat finish, it is very attractive and will last for years and years. It also features 3 integrated outlets and a grounded, US standard, a 3-prong power cord that is 6' long. Overall Dimensions: 11" (L) x 4" (D) x 4.5" (H). With clamp attached: 4-3/4" (D) x 5.5" (Height when fully closed) / 8.25" (Height when fully opened).

  • Overall Height - Top to Bottom: 4.5''
  • Overall Width - Side to Side: 4''
  • Overall Depth - Front to Back: 11''
  • Mounting / Installation Type: Drill and screw mount
  • : Hair Tool Holder
Opens in a new tab

Metal 6 Compartment Hair Tool Holder

by Saloniture

$39.99

Rated 4.5 out of 5 stars.2 total votes

Free shipping

Out of Stock

This convenient tabletop appliance caddy is designed to hold and organize blow dryers, heat irons, straightening irons, curling irons, hot combs and other accessories. Both space saving and portable, it can be moved wherever needed throughout your salon, or brought to client meetings to create a professional workspace. A 2-5/8" (Dia) ring allows you to quickly stow and retrieve your blow dryer, including those fitted with nozzles or other attachments. It can also fit and store almost any flat or round hair iron, and includes two rectangular storage compartments measuring 3-1/4" (L) x 1-1/8" (W) x 2-7/8" (D), both with a rounded area extending the width to 1-3/8". Three additional storage tubes each measure 1-1/4", 1-1/8", and 7/8" (Dia) x 2-7/8" (D). This appliance holder is extremely durable; constructed from high-grade steel in a heat resistant hammered finish, it is extremely attractive and will last for years and years. Additionally, each storage compartment is made of tough jet-black composite. A sturdy base measuring 9-7/8" x 5-1/8" with anti-slip foam feet easily keeps this stand steady to support your appliances and tools, and there are two screw holes in the base for a more permanent installation. Overall dimensions: 9-7/8" (W) x 6-3/4" (D) x 4-1/2" (H).

  • Overall Height - Top to Bottom: 4.5''
  • Overall Width - Side to Side: 6.75''
  • Overall Depth - Front to Back: 9.88''
  • Mounting / Installation Type: Freestanding
  • : Hair Tool Holder
Opens in a new tab

19'' L x 20'' W Black Portable Shampoo Sinks

by Saloniture

$79.99

Rated 3 out of 5 stars.2 total votes

Free shipping

Out of Stock

This premium shampoo basin is lightweight and economical, yet loaded with professional features. Its stain-resistant and easy-to-clean bowl is constructed from durable ABS composite, and the edge is rolled for strength and client comfort. This extra-large capacity bowl measures 18-1/2" front to back, 17" across, 6" deep and is also removable. The sink can be permanently installed and used in your salon, and is also portable and can be brought directly to a client's home. For travel use, simply supply a water source such as a water pitcher or hose, and you can drain the basin into a bucket or elsewhere. It is very sturdy and includes a strong pedestal base with a 1-1/2" diameter chrome-metal riser, and 5 legs that make up a 20" diameter base. Composite feet / bumpers on the bottom of the stand protect your floors from marks. The basin is fully adjustable and accommodates reclining or standard chairs; it can be tilted front or back to any working angle and the bowl can be raised or lowered as needed. Both tilt and height settings are locked into place with tension knobs. The height is adjustable from 33" to 48.5" (measured from the floor to the top front of the basin when in its level position). This sink can function with practically any chair or seating arrangement and can also tilt completely forward/parallel to its riser for easy storage and transportation. It includes a rubber plug stopper to fit the drain opening at the bottom of the basin and a ribbed, flexible drain hose that connects to the underside of the drain. The hose is 62" long, and is 1-1/4" in diameter to fit standard drain connections (unit does not include a water sprayer or any connections for water supply). Instructions for minor assembly are included.

  • Professional Salon Quality
  • Large Capacity Bowl
  • Tiltable Basin
  • Durable Materials
  • Easy to Transport
Opens in a new tab
30-Day Low Price

Metal 6 Compartment Hair Tool Holder

by Saloniture

$38.99

Rated 4 out of 5 stars.12 total votes

Free shipping

Out of Stock

This convenient salon appliance holder is designed to store and organize blow dryers, heat irons, straightening irons, curling irons, hot combs, and other accessories, Both space-saving and portable, it can be wall-mounted, unhooked, and moved where needed throughout your salon as a tabletop caddy, or brought to client meetings to create a professional workspace. A 2-5/8" (Dia) storage ring allows you to quickly stow and retrieve your blow dryer, including those fitted with nozzles or other attachments. It can also fit and store almost any flat or round hair iron and includes two rectangular storage compartments measuring 3-1/4" (L) x 1-1/8" (W) x 2-7/8" (D), both with a rounded area extending the width to 1-3/8". The three storage tubes each measure 1-1/4", 1-1/8", and 7/8" (Dia) x 2-7/8" (D). This appliance holder is extremely durable; constructed from high-grade steel in a heat-resistant hammered finish, it is very attractive and will last for years and years. Additionally, each storage compartment is made of tough jet-black composite. Overall dimensions: 9-7/8" (W) x 6-1/2" (D) x 4-1/4" (H) with an overall weight of 1.6 pounds. The rear mounting lip measures 9-7/8" (W) x 1-1/2" (H). Two screws and anchors for wall mounting are included in the box.

  • Organize all of your salon & hair appliances in one place
  • Made from high-grade steel in a beautiful hammered finish
  • Can be used on a tabletop or wall mounted
Opens in a new tab

19'' L x 20'' W Black Portable Shampoo Sinks

by Saloniture

$109.99

Rated 5 out of 5 stars.1 total votes

Free shipping

Out of Stock

This lightweight, portable shampoo basin is constructed of durable ABS composite with a rolled edge for both strength and client comfort. The bowl has a large capacity, and measures 20" front to back, 19" across and 9-1/2" deep. It connects to the base with a sturdy steel bracket. The pedestal has a 1-1/2" diameter, chrome metal riser with five legs that form a 22" diameter base. Composite feet/bumpers are included on the bottom of the stand to protect floors from marks. The sink can be permanently installed in a salon, or can be carried to a client's home for portable use (supply your own water source such as a water pitcher or hose, and basin may be drained into a bucket). A rubber plug stopper is included that fits the drain opening at the bottom of the basin, and a flexible, ribbed drain hose (60" long x 1-1/4" diameter) connects to the underside of the basin. Sink is adjustable to accommodate reclining or standard chairs. It tilts front or back and can be raised or lowered from 39" to 55" (measured from floor to top of basin when level). The neck rest dips to as low as 33" from the floor when titled, so this unit can be used with just about any chair. Includes basin with stand (minor assembly required), drain hose, drain hose clamp and instructions.

  • Mounting / Installation Type: Portable
  • Number of Basins: Single
  • Material: Plastic
  • Legs Included: Yes
Opens in a new tab

Metal 6 Compartment Hair Tool Holder

by Saloniture

$47.99

Rated 3 out of 5 stars.2 total votes

Free shipping

Out of Stock

This convenient tabletop appliance caddy is designed to hold and organize blow dryers, heat irons, straightening irons, curling irons, hot combs and other accessories. Both space saving and portable, it can be moved wherever needed throughout your salon, or brought to client meetings to create a professional workspace. A 2-5/8" (Dia) ring allows you to quickly stow and retrieve your blow dryer, including those fitted with nozzles or other attachments. It can also fit and store almost any flat or round hair iron, and includes two rectangular storage compartments measuring 3-1/4" (L) x 1-1/8" (W) x 2-7/8" (D), both with a rounded area extending the width to 1-3/8". Three additional storage tubes each measure 1-1/4", 1-1/8", and 7/8" (Dia) x 2-7/8" (D). This appliance holder is extremely durable; constructed from high-grade steel in a heat resistant hammered finish, it is extremely attractive and will last for years and years. Additionally, each storage compartment is made of tough jet-black composite. A sturdy base measuring 9-7/8" x 5-1/8" with anti-slip foam feet easily keeps this stand steady to support your appliances and tools, and there are two screw holes in the base for a more permanent installation. It also features 3 integrated outlets and a grounded, US standard, 3-prong power cord that is 6' long. Overall dimensions: 9-7/8" (W) x 6-3/4" (D) x 4-1/2" (H).

  • Overall Height - Top to Bottom: 4.5''
  • Overall Width - Side to Side: 6.75''
  • Overall Depth - Front to Back: 9.88''
  • Mounting / Installation Type: Freestanding
  • : Hair Tool Holder
Opens in a new tab
ServerT:1.9988000392914