Tips: Before change the pool bulb, pls buy a new gasket to avoid leakage.
This bulb is AC 120V with an E26/E27 screw-in base.
Before ordering, please check your fixture's voltage, socket configuration, and dimensions.To verify if this bulb is compatible with your fixture, first, use a standard AC 120V household bulb with an E26 base and see if it screws into your fixture. Next, check the fixture's diameter and depth. Measure the depth from the inside of the socket hole to the fixture's edge. Then measure the diameter of the fixture opening. If your measurements are greater than our light's specifications, our light will fit.
The remote control uses an enhanced signal transmitter with a sensing distance of 33 feet in open space.
Water or flooring can block or attenuate the signal, when The remote control (in full battery) is not sensitive, it means the light set is not receiving the signal, please move closer to the light set distance, pull out the antenna and aim it at the light set to adjust the mode. The light pattern can also be changed using the pool light electric switch.
When the light patterns in a fixture group (2PC and above) are inconsistent, you can adjust the inconsistent lights or patterns to be consistent.
In this case, you need to adjust the inconsistent bulbs one by one, and when the mode of a single bulb is adjusted to be the same as the other bulbs, then turn on the other bulbs, so that all bulbs will have the same light mode. If you are unable to determine the light pattern of an existing fixture group, it is recommended that you adjust the fixture group to white light first, and then adjust the pattern of the bulbs with inconsistent light emission.
If you've received the package with missing parts, please let us know, we'll promptly resolve the issue for each customer.
This bulb is AC 120V with an E26/E27 screw-in base.
Before ordering, please check your fixture's voltage, socket configuration, and dimensions.To verify if this bulb is compatible with your fixture, use a standard AC 120V household bulb with an E26 base and see if it screws into your fixture. Next, check the fixture's diameter and depth. Measure the depth from the inside of the socket hole to the fixture's edge. Then measure the diameter of the fixture opening. If your measurements are greater than our light's specifications, our light will fit.
The remote can't control the lights?
Signal range: the remote control has a signal range of up to 33 feet in open space, but the depth at which the bulb is installed underwater (enclosed space) may affect the signal reception, if the remote control does not respond, please move closer to the fixture, extend the antenna, and place the remote control in the equipped waterproof bag and aim the remote control directly at the bulb
How do I adjust multiple lights with inconsistent light colors?
When the light patterns in a fixture group are inconsistent, you need to adjust the inconsistent bulbs one by one, and when the mode of a single bulb is adjusted to be the same as the other bulbs, then turn on the other bulbs, so that all bulbs will have the same light mode. If you are unable to determine the light pattern of an existing fixture group, it is recommended that you adjust the fixture group to white light first, and adjust the pattern of the bulbs with inconsistent light emission.
If you've received the package with missing parts, please let us know, we'll promptly resolve the issue for each customer.
