PoolfenceDIY

Use this product to install your stainless steel 1/2″ Peg Fence in dirt, or Pavers. Now your DIY Pool Fence can be easily installed into almost every type of yard; whether it be, concrete, clay, dirt, porcelain tiles, concrete Pavers, wood decks, and many more. The PoolfenceDIY Dirt Sleeve is made from high-density polymers and is over 12″ long for added stability. The sleeve has a pointed base to allow for easy installation. A drainage hole through the length of the sleeve to prevent water from filling the sleeve. Also, when you remove the fence you can place the cover cap into the sleeve to prevent dirt and debris from filling sleeve. A 3/4″ bit required for installation through Concrete, Pavers, wood deck or any other type of solid surface.

Worked perfectly to fence around our pond. Just make sure you review how the angle can help keep the fence tight as you go around corners.. Erika. Petaluma, CA. Fri Mar 19 2021

48" H x 5" W x 5" D, Brown

Easily customizable to fit around your pool, the PoolfenceDIY mesh safety fence helps protect against accidental falls into your pool and can be installed by yourself (no contractor required). This 12-foot-long section of the fence has 4-foot and 5-foot height options to help make your backyard pool area a safer place for children. In addition to concrete and other solid surfaces, PoolfenceDIY can be installed on pavers, on sand/crushed stone, on a wood deck, and into the dirt, rock gardens, and other loose surfaces. The fence is constructed of industrial-strength PVC-coated nylon mesh, which has a strength rating of 387 pounds per square inch. The UV-resistant mesh provides years of use in all weather conditions. The stainless-steel pins are easily inserted into the supplied sleeves and exceed most local safety requirements. To determine how much fencing your pool area needs, measure around the edge of your pool and leave 24 to 36 inches from the water’s edge, for walking and cleaning. After determining your total footage, divide by 12 to calculate the correct number of sections needed. When installed, poles are spaced out every 36 inches. The 12’ foot sections can be shortened to fit smaller spaces.

Not really adequate. Debra. Smithtown, NY. Fri Jan 02 2026

Black , 48" H x 30" W x 3" D

An integral part of the PoolfenceDIY pool safety system from Life Saver, is a self-closing, self-latching gate with a flat top that will help make your backyard pool area a safer place for children. The PoolfenceDIY Flat-Top Gate operates with sturdy double-truss uprights, an ultra-reliable magnetic latch (designed specifically for securing gates around swimming pools), and self-closing gate hinges. The PoolfenceDIY Gate has a 4-foot or 5-foot height option with a 30” walk-through opening that swings away from the pool. Its aluminum, powder-coated square stock matches Life Saver's PoolfenceDIY durable mesh fencing. It also features industrial-strength PVC-coated nylon mesh, which has a strength rating of 387 pounds per square inch. The UV-resistant mesh provides years of use in all weather conditions. The gate has an adjustable swing for left- or right-handed opening. All hardware for concrete installation included. Installation requires a rotary hammer drill with a standard 5/8-inch x 14-inch (minimum) masonry bit (not included).

Just as described, sturdy and well made. Cambria. Springtown, TX. Thu May 21 2026

66" H x 2" W x 2" D, Black

The spare pole is used where additional poles are needed such as 90 degree turns or to follow the pool’s exact contours. As well as, when making custom sections for stairs or custom sections. This pole can be attached to one of our 3’ Add-On Extension Kits to make a 3’ wide panel. Each spare pole will come with 1- complete pole and the molding strip, 1- 2.5-inch stainless-steel lockable latch, 1- gray ground sleeve, 1- gray ground cap, and screws for installation for your pool fence system. The ground sleeve provided fits into the 5/8-inch holes required by PoolfenceDIY

We are proud to announce this revolutionary product! This hanger will replace your existing pole cap from your pool fence. Once replaced, this product can be used to keep your safety equipment within close reach. You can also hang your towels to dry, put up swimsuits, or goggles. You can even hang a life preserver from it! You can keep all the cleaning equipment and hoses organized and out of the way when the pool is in use. This This product in packs of two for your convenience. The Omni-Hangers are constructed of a high-grade plastic strong enough to hold over 100 LBS per hanger!

Holds well, easy to install.. Rebecca. Plano, TX. Sat Mar 04 2023

54" H x 36" W x 3" D, Brown

The spare pole is used where additional poles are needed such as 90-degree turns or to follow the pool’s exact contours. As well as, when making custom sections for stairs or custom sections. This pole can be attached to one of our 3’ Add-On Extension Kits to make a 3’ wide panel. Each spare pole will come with 1- complete pole and the molding strip, 1- 2.5-inch stainless-steel lockable latch, 1- gray ground sleeve, 1- gray ground cap, and screws for installation for your pool fence system. The ground sleeve provided fits into the 5/8-inch holes required by Poolfence DIY.

Only comes with one pole.. Kaitlyn. Virden, MB. Wed Jul 08 2020

Gray

This product come in a pack of 5. These sleeves and caps are for 1/2″ stainless-steel peg and require a 5/8″ hole to be drilled for installation. These sleeves are for concrete installation, but they can be installed on any solid surface including wood decks, asphalt, or stone surfaces (marble, granite, tile, etc. The caps provided will fit into the sleeve when you take down your mesh removable safety fencing. These caps will prevent the sleeve from filling up with water, dirt, and debris. These sleeves can be used to replace old sleeves that have deteriorated over time or if you would like to change your fence location.

Just what I needed. Sherri. Laguna Niguel, CA. Sun Mar 15 2020

A necessary tool for the installation of a Pool Fence DIY pool safety system from Life Saver into concrete: a Rotary Hammer Drill and Masonry drill bit. The bit is 5/8″ inch diameter by 15″ inch length, with an SDS-Plus shank. This Rotary Hammer Drill and the bit were designed to work with the optional Pool Fence DIY Drill Guide (sold separately) taking the guesswork out of the drilling process for proper in-ground installation of the Pool Fence DIY fence and gate systems. Pool Fence DIY offers 7-day-a-week installation support by phone, and this gate is backed by a limited lifetime warranty.

Anonymous. Sat May 30 2026

This product is custom machined, made of stainless steel components. This is the only latch that was designed specifically for Mesh Pool Safety Fencing. Each unit comes with one (1) latch and one (1) eyelet. It requires, tools and two hands to operate, adding to the security of your child safety fence. Because this latch requires a screwdriver and a wrench to install, remove, and adjust; this latch is what is needed to make your pool fence, into a permanent barrier, allowing you to pass most, if not all of the state and local building codes, that govern Mesh Pool Barriers.

This isn’t something that can be fastened and unfastened. Permanent connection!!. Danielle. Jackson, MI. Wed Aug 23 2023

Using our guide, with the bubble level attached, is the most accurate way to install your DIY Pool Fence and Gates. It allows you to consistently drill the holes at the proper angle. It takes all of the guessing out of the drilling process. Please note a 5/8″ X 14″ (or longer) concrete drill bit will be required to use this Drill Guide. Please refer to the installation instructions provided by PoolfenceDIY for the proper use of this tool. There are wingnuts on the side of the drill guide to adjust for angled or plumb positions. There are also threaded adjustments at the base to ensure the drill guide is level.

Easy to setup and use. Made drilling the holes a breeze.. Emory. Alvin, TX. Sun Jun 25 2023

A necessary tool for the installation of a Pool Fence DIY pool safety system from Life Saver into the concrete. This masonry drill bit is 5/8″ inch diameter by 15″ inch length, with an SDS-Plus shank (will fit most drills SDS or SDS-Plus chuck). This bit was designed to work with the optional Pool Fence DIY Drill Guide (sold separately) taking the guesswork out of the drilling process for proper in-ground installation of the Pool Fence DIY fence and gate systems. Pool Fence DIY offers 7-day-a-week installation support by phone, and this gate is backed by a limited lifetime warranty.

Sue. Mckinney, TX. Wed Nov 13 2024

This is a standard 2.5″ stainless steel, spring loaded, lockable latch. This is the typical latch used for most Pool Fence’s. Each unit comes with one (1) latch and one (1) eyelet. It requires two hands to operate, adding to the security of your child safety fence. This item can also be used to secure other objects you wish to keep closed like cabinets, doors, and sheds. The stainless-steel construction keeps this latch operating in all weather. The threaded eyelets can be installed into many surfaces including wood, plastic, and metal. When installing into concrete or brick you can use a plastic wall anchor for added security.

Loved the product. Easy to install. Pamela. Brandywine, MD. Sun Oct 31 2021

We are proud to announce this revolutionary product! This hanger will replace your existing pole cap from your pool fence. Once replaced, this product can be used to keep your safety equipment within close reach. You can also hang your towels to dry, put up swimsuits, or goggles. You can even hang a life preserver from it! You can keep all the cleaning equipment and hoses organized and out of the way when the pool is in use. This This product in packs of two for your convenience. The Omni-Hangers are constructed of a high-grade plastic strong enough to hold over 100 LBS per hanger!

Brown , 60" H x 30" W x 3" D

An integral part of the thePoolfenceDIY pool safety system from Life Saver, self-closing, self-latching gate with an arched-top that will help make your backyard pool area a safer place for children. The PoolfenceDIY Arched Gate operates with sturdy double-truss uprights, ultra-reliable magnetic latch (designed specifically for securing gates around swimming pools), and self-closing gate hinges. The PoolfenceDIY Gate has a 4-foot or 5-foot height option with a 30” walk-through opening that swings away from the pool. Its aluminum, powder-coated square stock matches Life Saver's PoolfenceDIY durable mesh fencing. It also features industrial-strength PVC-coated nylon mesh, which has a strength rating of 387 pounds per square inch. The UV-resistant mesh provides years of use in all weather conditions. The gate has an adjustable swing for left- or right-handed opening. All hardware for concrete installation included. Installation requires a rotary hammer drill with a standard 5/8-inch x 14-inch (minimum) masonry bit (not included).

It delivered on time and it does the job. Easy to install. Alex. Chula Vista, CA. Thu Aug 14 2025

We are happy to introduce this Fence Post Cap. It will replace the existing pole cap from your pool fence. This solar light uses a rechargeable AAA battery and charges in the sun or shade with an approximate 8-hour run time. It was constructed to fit on 1″ pool fence posts. This light was created by Life Saver Pool Fence for their product lines; it may not be compatible with other manufactures’ products, without custom fitting. It features a bright white 3 Lumen light. You can use this light to brighten your pool fence in the dark, designate the gate entrance, and create that amazing ambiance for your back yard, which you have always wanted. This solar-powered light is the next great addition to your pool fence.

We ordered 6 of these lights and they worked great for the first couple of weeks. Now only 3 of them work.. Karena. Fort Worth, TX. Sat Jul 17 2021

Using our DIY Drill Guide, with the bubble level attached, is the most accurate way to install your DIY Pool Fence and Gates. It allows you to consistently drill the holes at the proper angle. It takes all of the guessings out of the drilling process. Please note a 5/8″ X 14″ (or longer) concrete drill bit will be required to use this Drill Guide. Please refer to the installation instructions provided by PoolfenceDIY for the proper use of this tool. There are wingnuts on the side of the drill guide to adjust for angled or plumb positions. There are also threaded adjustments at the base to ensure the drill guide is level.

Just as described, sturdy and well made. Cambria. Springtown, TX. Thu May 21 2026