meiqi

Platform dolly with a soft blue nylon deck and a foldable carbon steel frame for heavy-duty transport. Measures 35 x 23 x 34 inches when open and folds to 8 inches high for compact storage. Supports up to 660 pounds. Equipped with four 360-degree swivel PU wheels that provide smooth maneuverability and resistance to wear and high temperatures. The galvanized push handle aids navigation in tight spaces. Suitable for moving boxes, luggage, and supplies in home, garage, or workshop environments.

This freestanding flake ice maker features a clean white cold-rolled steel housing with a SUS304 food-grade cooling roller and SUS420 stainless steel blades. Measuring 19.53L x 13.15W x 15.55H inches and weighing 37.03 lbs, the unit connects to a standard plug-in power source for indoor use. Its air cooling system pre-cools in 90 seconds and produces ice within 3 seconds, yielding up to 132 lbs of flake ice per day. A 0.48-gallon reservoir supplies water for processing ice textures from fluffy snowflake to thin strips via the 0–100 adjustable speed knob. The rust-resistant stainless steel construction supports simple cleaning and reliable operation.

This freestanding ice maker is constructed from stainless steel with a polished silver finish, designed for indoor installation. It produces up to 130 lbs of cube-shaped ice daily, with a 33 lb storage capacity and a production rate of 45 cubes per cycle. The unit measures 20.47L x 18.11W x 35.04H inches and weighs 66.42 lbs. An LED control panel enables one-touch selection of ice thickness. The self-cleaning function runs a 20-minute automatic rinse cycle, and a removable water tray facilitates deep cleaning. A low-noise compressor operates at or below 50 dB, and 0.79-inch insulation helps maintain ice temperature.

A rectangular grill gazebo measuring 143.07L x 77.72W x 92.28H inches, constructed with a galvanized steel hardtop roof and a silver steel frame. The wood-tone brown roof features a sloping design for efficient rainwater runoff and ventilation. Two integrated side shelves provide convenient preparation space, while four ceiling hooks allow hanging of utensils or lights. Pre-drilled base plates enable secure anchoring on concrete or hard surfaces. Assembly requires two to three people and a screwdriver, with all other tools included.

This built-in ice maker is constructed with a stainless steel exterior and delivers up to 130 lbs of cubed ice per day, with a 33 lb storage bin. Measuring 20.47L x 18.11W x 35.04H inches and weighing 66.42 lbs, the unit uses R-290 refrigerant and is powered by a standard plug-in connection. The self-cleaning cycle simplifies maintenance, while LED controls enable selection between thick or thin cube options. The insulated bin helps maintain ice temperature, and the interior lighting and viewing window provide a clear view of the ice-making process. Suitable for indoor use in home bars or light commercial settings, it carries ETL safety listing.

This wall-mounted metal gazebo measures 111.73" W x 104.41" D x 98.46" H and features a matte black galvanized steel hardtop roof with an inclined design to shed water. The steel frame includes four reinforced upright columns, crossbeams, and pre-drilled bases for secure freestanding installation on grass or lawn. Protective edge trim and plastic corner guards prevent scratches. With a load-bearing roof capacity over 500 pounds, it withstands varied weather and offers versatile outdoor use as equipment storage or a sheltered seating area.

This grill gazebo features a durable powder-coated steel frame and a brown-toned polyester canopy with a PA coating for flame retardancy, UV resistance, and water repellency. The double-top design promotes airflow and reduces smoke accumulation. An adjustable side awning provides flexible sun and weather protection. Two spacious side shelves and five utility hooks keep tools and seasonings within easy reach. Overall dimensions are 95.3 L x 58.7 W x 97.6 H inches, and it weighs 50.6 lbs. Assembly is required, with ground nails and expansion screws included for secure freestanding installation.

This portable ice maker is constructed from durable ABS and engineered to produce up to 44 lbs of flake ice daily. Measuring 14.96L x 9.84W x 13.39H inches and weighing 20.34 lbs, it features an integrated 0.2-gallon water tank and utilizes R-600a refrigerant within an air-cooled system that achieves pre-cooling in 60 seconds and ice formation in just 3 seconds. The SUS304 food-grade cooling roller and SUS420 stainless steel blades ensure hygienic, consistent ice production. A smart touch panel provides 8 adjustable speeds for creating textures ranging from fluffy snowflake to noodle-like strips, while the one-touch cleaning function maintains hygiene. Suitable for indoor use, this deep black unit powers via a standard plug-in connection.

This 3-in-1 countertop appliance integrates ice making, water dispensing, and self-cleaning functions. Constructed with a durable stainless steel body in a black finish, the unit measures 11.02L x 17.32W x 18.9H inches and weighs 29.76 lbs. It produces up to 35 lbs of bullet-shaped ice daily, with a quick 7-minute cycle and 4-lb storage capacity. Crushed ice mode supports blended drinks. Dual water supply allows manual filling or direct line connection. The R-600a refrigerant system ensures efficient operation, and the one-touch self-cleaning cycle simplifies maintenance.

This 13 x 10 ft outdoor patio gazebo features a robust powder-coated steel frame with triangular corner supports for stability. The canopy is constructed of durable polyester with a beige-toned khaki finish, offering a double-tier design that promotes airflow and reduces water accumulation. Four-sided mesh sidewalls provide insect protection while allowing ventilation and can be removed as needed. Measuring 157.48 L x 118.0 W x 108.66 H inches and weighing 75 lbs, it is suited for lawns, gardens, backyards, and decks. Assembly requires two people and a screwdriver.

This rectangular grill gazebo measures 143.07L x 77.72W x 92.28H inches and features a gray-toned powder-coated galvanized steel roof with a sloped design for efficient rainwater runoff and ventilation. The robust all-steel frame includes triangular braces and pre-drilled bases for secure freestanding installation on solid surfaces. Two integrated side shelves provide convenient prep space, and four ceiling hooks allow hanging of utensils or lights. Assembly requires two to three people and a screwdriver; all necessary hardware and instructions are included.

A floor-standing 3-in-1 water dispenser and ice maker constructed with a classic black stainless steel exterior, delivering cold and ambient water alongside bullet ice production. The unit operates on a plug-in power source and utilizes R-600a refrigerant to generate up to 33 lbs of ice per day, with a rapid 7-minute cycle producing 9 bullet cubes. Integrated 1.3 lb ice storage maintains a ready supply. The bottom-loading design accommodates 3-5 gallon bottles without heavy lifting, while a manual refill option adds flexibility. Control panel features simple button operation for ice making, cooling, and cleaning, supported by water shortage and full-ice indicators plus a child lock for safety.

This 3 ft x 164 ft field wire fencing is constructed from 14-gauge steel with a hot-dip galvanized finish for enhanced corrosion resistance. The graduated mesh design features smaller openings near the bottom to prevent smaller animals from passing through, while larger upper openings reduce material cost. Twisted weave technology secures vertical and horizontal wires, maintaining structural integrity under tension. The polished silver metal finish integrates with rural and agricultural settings. Suitable for containing cattle, goats, sheep, and deer, this fencing system installs with stakes and requires a hammer or mallet for assembly.

This outdoor grill gazebo measures 96.5 L x 58.3 W x 99.2 H inches, constructed with a powder-coated steel frame and a slate gray polyester double-layered canopy. The PA-coated roof provides water and UV resistance. Integrated metal mesh shelves on each side offer convenient storage for grilling tools and accessories. A built-in bottle opener on the frame adds practical functionality. The freestanding, rectangular design suits garden parties, BBQs, and outdoor family gatherings. Assembly is required with a screwdriver.

Ideal for musicians, producers, or anyone practicing, the Willow Black Music Desk turns your space into a functional, clutter-free hub. It fits 61-key keyboards perfectly with its dedicated tray, while built-in cable holes banish tangled cords—no more messy wires! The top shelf holds speakers, the base shelf stores accessories, and 4 wheels let you roll it anywhere—from your studio to the living room—without heavy lifting. Made of durable synthetic wood, it’s sturdy for daily use, and its sleek black finish matches any decor. A budget-friendly pick that makes music time easier and more enjoyable.

Field wire fencing measuring 3 feet high by 164 feet long, constructed from 13-gauge steel wire with a hot-dip galvanized finish for corrosion resistance. The woven design features graduated mesh spacing that narrows from top to bottom, containing smaller openings near the ground to block small animals while allowing visibility. The vertical and horizontal wires are joined using twist-weave technology for a secure connection. Weighing 22.59 lb, this metal fencing is suitable for enclosing livestock, poultry, gardens, and pets. Assembly is required.

Portable ice maker with a durable plastic housing in a slate gray finish, designed for indoor kitchen or home use. This compact unit measures 8.6L x 11.6W x 11.0H inches and weighs 12.8 lbs. It produces up to 26 lbs of bullet-shaped ice per day, with a cycle time of 6-12 minutes yielding 9 cubes per cycle. The 1.3L water tank and 0.6 kg ice storage basket support continuous operation. A self-cleaning function simplifies maintenance, while the LED display and transparent lid allow easy monitoring. Integrated compressor cooling uses R-600a refrigerant, with automatic shutoff when the basket is full. ETL listed and FDA certified, it operates on 110-120V/60Hz power.

This freestanding ice maker head delivers 450 pounds of cube ice daily from a durable stainless steel body. Equipped with 182 ice trays and a robust compressor, it produces ice in 12 to 15 minutes per cycle. The electronic touch panel allows adjustable ice thickness via time settings, one-touch self-cleaning, and real-time status monitoring. Sized at 25.59L x 24.8W x 29.72H inches and weighing 130.29 pounds, the unit requires assembly and operates indoors with a plug-in power source. Its polished silver finish suits restaurant, bar, cafe, and hotel environments demanding high-volume ice supply.

Freestanding flake ice maker engineered with a durable cold-rolled steel body and food-grade SUS304 and SUS420 stainless steel components. Produces up to 132 lbs of snowflake ice per day with a high-efficiency air cooling system that precools in 90 seconds and delivers ice in 3 seconds after precooling. The variable-speed control offers 0-100 settings to create textures from fluffy snow to thin strips. A 0.48-gallon integrated tank supports continuous operation without additional plumbing. This unit measures 19.53 x 13.15 x 15.55 inches and weighs 37.03 pounds, powered by R-290 refrigerant with a plug-in connection. Designed for indoor small gatherings and home use.

This freestanding rectangular grill gazebo measures 95L x 59W x 97H inches and weighs 42.2 lbs, constructed with a matte black powder-coated steel frame for rust resistance. The canopy features a double-tiered soft top made of 180 gsm polyester fabric in a neutral beige shade, offering UV protection, flame retardancy, and water repellency. The two-tier design enhances stability by dispersing wind and vents grill smoke efficiently. Integrated accessories include a bottle opener, two iron mesh side tables with hooks for utensils, ground pegs, and a center hanging hook. Ideal for backyard barbecues, it accommodates 3-4 people and requires assembly with a screwdriver (not included).

This commercial ice maker head is constructed from stainless steel with a polished silver finish and measures 25.59L x 24.8W x 29.72H inches, weighing 130.29 lbs. It produces up to 450 lbs of cube ice daily, approximately 17,500 pieces, utilizing a R-290a refrigerant system. The unit features 182 ice trays and achieves a fast 12–15 minute ice-making cycle. An electronic touch control panel allows adjustment of ice thickness via ice-making time and includes a one-touch self-cleaning function. Designed for indoor use in restaurants, bars, cafes, and hotels, it requires plug-in power and assembly. Note: it is a head-only unit without storage capacity.

This 13x10 ft rectangular soft-top gazebo features a powder-coated steel frame with triangular reinforced legs for stable support. The double-tiered roof is crafted from high-quality polyester fabric, providing UV protection and promoting airflow to reduce wind and water accumulation. Four-sided detachable mesh sidewalls offer insect protection while maintaining ventilation, and can be removed as needed. Suitable for installation on grass or lawn, the gazebo accommodates 3-4 people and is ideal for patios, gardens, backyards, and decks. Assembly requires a screwdriver and is recommended for two persons.

This portable ice maker delivers up to 26 lbs of bullet-shaped ice per day, with a fast 6-minute cycle producing 9 cubes. The compact unit measures 8.6L x 11.6W x 11.0H inches and weighs 12.8 lbs, making it easy to move. It features a 1.3 L water tank and a 0.6 kg ice storage basket. The plastic housing in slate gray includes an LED display, removable basket, and self-cleaning function. A compressor with R-600a refrigerant ensures efficient cooling, while the automatic shutoff activates when the basket is full. ETL and FDA certifications are included.

This wire fencing roll measures 5 feet high by 328 feet long, constructed from 14-gauge steel with a hot-dip galvanized silver-tone finish for corrosion resistance. The graduated mesh design features smaller openings at the bottom to deter small animals while maintaining structural integrity. Vertical and horizontal wires are connected using a twisted weave technique that resists loosening. Suitable for containing cattle, horses, sheep, goats, deer, and other livestock, as well as protecting gardens and poultry areas. Assembly is required, and the roll weighs 103.6 pounds, offering a heavy-duty solution for perimeter enclosures.

This 12×8 ft wall-mounted outdoor gazebo features a hardtop roof constructed from galvanized steel plates for reliable weather resistance. The steel frame includes four upright columns and crossbeams, delivering a load-bearing capacity over 500 lbs. A sloping roof design prevents water accumulation, while protective edge materials and plastic corner guards enhance durability. Measuring 148.58" L x 104.65" W x 98.62" H, the lean-to pergola mounts against a wall and suits patios for barbecues and gatherings. Pre-drilled bases and a bottom reinforcement design improve stability. Assembly requires 3-4 persons, with all hardware and manual included.

This pedal-powered go kart features a 39.25-inch length, 22.75-inch width, and 23-inch height constructed from PP, metal, and EVA materials. The four-position adjustable seat accommodates riders ranging from 47.2 to 59.1 inches in height, supporting up to 66 pounds. Forward and reverse drive functionality, combined with a handbrake, provides precise control. Silent, shock-absorbing EVA wheels and a swing axle ensure stable traction on cement, brick, gravel, and asphalt surfaces. Suitable for ages 3 to 8, assembly required.

This storage shed is a polypropylene cabinet measuring 73.2 by 51.6 by 78.0 inches with a 23 sq ft base footprint. A peaked roof and vent manage moisture, while a window provides visibility into the interior. The lockable double doors open to 24.8 inches wide by 65.4 inches high for large equipment access. Aluminum alloy reinforcement supports the resin panels in a neutral gray finish.

Galvanized steel trellis panels with a powder-coated finish provide rust resistance for outdoor climbing plants. Each 19.7-inch by 71-inch stake-mounted panel assembles with pre-cut and pre-drilled holes. These fence panels support ivy, roses, morning glories, clematis, jasmine, grapes, blackberries, cucumbers, beans, and peas. The double-protection construction combines galvanized tubing with powder coating. Panels can stand alone or connect to form screens and corners. Clean with soap and water.

This kid-sized ride-on airplane rocker combines a solid wood base with a reinforced steel frame, all wrapped in a soft plush cover. The rocking motion and plush fabric provide a calming, sensory experience ideal for pre-nap or post-activity relaxation. Press the head to activate a soothing lullaby melody, adding an interactive sing-along element. Safety features include integrated handles, a tall seat back, and a seat belt to help keep young riders secure. The airplane shape and bright multi-colored fabric support perception and tactile learning. Overall assembled size is 9.76 L x 6.18 W x 6.65 H inches, weight 13.12 lbs.

This modern shower system combines a 10-inch square rain head and a handheld sprayer for comprehensive coverage. Constructed with a brass rough-in valve and stainless steel components, the assembly features a soft silver chrome finish. The pressure-balanced mixer valve with 1/2-inch NPT connections maintains consistent temperature during pressure fluctuations. A swivel ball joint on the rain head allows angle adjustment, while the waterfall tub spout delivers high-volume flow for rapid tub filling. Wall-mounted installation is supported by included instructions. Overall dimensions are 18.9 x 14.96 x 9.94 inches, with a flow rate of 1.8 to 2.2 gpm.

This single-hole bathroom faucet features a deck-mount installation and a zinc body with a silver-tone chrome finish for corrosion resistance. The single lever handle provides precise control over flow rate and water temperature, while the 1.5 GPM flow rate and soft-touch aerator ensure efficient, splash-free performance. With a spout height of 5.04 inches and reach of 5.48 inches, it fits standard 1-hole sinks. Two 9/16-inch flexible hoses are included for hot and cold water connections, along with all mounting hardware and instructions for straightforward DIY installation. Ideal for bathrooms, RVs, and laundry vanities, this faucet combines modern design with functional engineering.

This outdoor storage shed combines a metal utility building with a side firewood rack for winter readiness. The structure is made of galvanized steel with an apex roof and integrated punched vents that resist sunlight deterioration. Assembled dimensions are 80.71 inches long, 19.69 inches wide, and 72 inches high, weighing 81.73 pounds. The door entrance measures 24 inches wide by 56.16 inches high. Full assembly is required, and all tools are included for step-by-step installation.

Constructed from galvanized steel tubing with a powder-coated finish, this garden trellis panel provides a dual-layer protective surface. The 86.7-inch by 19.7-inch panel offers vertical support for climbing plants such as ivy, roses, and cucumbers. Pre-drilled holes and pre-cut components allow one person to assemble the unit with common tools. The ground-insert mounting method requires no additional hardware for placement along beds or borders. Four panels are included, and the surface can be cleaned with soap and water.

This walk-in greenhouse provides a controlled growing environment with a durable galvanized steel frame and a translucent rich green polyethylene cover. Measuring 20 feet long, 10 feet wide, and 7 feet high, it offers ample space for plant management. The frame includes slant bracing tubes, a front cross bar, and middle reinforced tubes for structural stability. Eight roll-up mesh windows enable cross ventilation, while the zippered roll-up door allows convenient access. Four screw stakes and rods anchor the tunnel securely into soil, designed for year-round use but requiring cover removal during heavy snow or strong winds.

White

This 20' x 40' party tent provides an 800-square-foot outdoor shelter with a brown-toned 170gsm polyethylene canopy that delivers UPF30+ UV protection, blocking up to 97% of rays and resisting water. The structure uses 1.5-inch galvanized steel tubes and 1.6-inch connectors, reinforced by extra roof corner support beams and ground bars for enhanced stability. Twelve integrated windows admit natural light, and two oversized doorways (175.2" x 74.8") ensure smooth entry. Removable sidewalls adapt to changing weather, making it suitable for weddings, events, or as a two-car carport. Assembled dimensions are 185.71" L x 92.99" W x 49.61" H, with a weight of 136.09 lbs.

Green

This walk-in greenhouse features a steel frame and a UV-resistant PE cover, measuring 22.17" L x 11.02" W x 29.13" H. The structure provides six shelves across three tiers per side, each supporting up to 44 lbs for organized vertical gardening. The PE cover offers water-resistant protection and blocks light wind while retaining warmth for plant growth. A large 29.9" x 59.1" zippered roll-up door allows easy access and adjustable ventilation. The 3.9" extended cover base can be buried or weighted down, and included U-shaped ground stakes and guy ropes enhance stability. The foldable steel frame enables quick assembly and compact off-season storage.

Green, 6.6' H x 6.2' W x 6.3' D

A walk-in greenhouse designed for year-round cultivation, constructed with transparent polycarbonate panels that provide high light transmission and UV blocking. The aluminum frame features a powder-coated finish for water resistance, complemented by a galvanized steel base for structural reinforcement. Integrated rain gutters enable collection of natural rainwater. A sliding door facilitates easy equipment access, while the hinged roof vent enables controlled temperature and humidity regulation. This unit assembles to 29.43L x 29.72W x 31.2H inches and weighs 99.63 lbs.

Bathroom sink faucet constructed from metal with a deep black finish, designed for deck-mount centerset installation on 4-inch 3-hole configurations. The high arc spout reaches 5.4 inches and rotates 360 degrees for enhanced sink access. Two lever handles provide independent hot and cold water control via ceramic disc cartridges tested to 500,000 cycles. A 1.2 GPM flow rate is maintained by an ABS aerator delivering a soft, non-splashing stream. Includes a pop-up drain assembly and two 23.62-inch braided stainless steel supply hoses with standard compression connections for straightforward setup.

This pedal-powered ride-on excavator features a heavy-duty steel frame and high-impact plastic body in a soft yellow finish. The unit measures 64.25 inches long, 16.5 inches wide, and 28 inches high, with a seat height of 13 inches and a weight capacity of 77 pounds. A fully articulated digging arm with a controllable bucket at the front, combined with a detachable trailer at the rear, enables realistic excavation and hauling play. The six-wheel configuration and manual pedal drive require no batteries, while the integrated mechanical horn adds an audible element to the construction experience. Assembly is required; designed for outdoor use by children ages 3 to 6 years.

Constructed from galvanized steel with a painted slate gray finish, this 109 by 76.8 by 75.5 inch storage shed provides a weather-protected outdoor tool room. Pre-cut and pre-drilled panels, double sliding doors, and a foundation kit support full assembly on an even ground surface. Four vents improve airflow and lighting, while the sloped roof directs rain and moisture away from the 105 by 71.3 inch interior.

These fence panels provide vertical climbing support for outdoor gardens, patios, and landscape borders. Each trellis is constructed from galvanized steel tube with a powder coated finish for double-layer rust protection. The set includes four panels, each measuring 17.7 inches wide by 71 inches high, for a combined assembled footprint of 73 inches long by 73 inches wide by 71 inches high. The staked design allows single-panel use or arrangement into a screen or corner, and assembly requires all included tools with a total product weight of 15.4 pounds. Clean with soap and water.

This plush dinosaur rocking chair combines a soft polyester body with a sturdy wood and steel frame. Designed as a ride-on rocking toy, it supports up to 66 pounds for children aged 18-36 months. The assembled unit measures 9.25L x 4.92W x 7.58H inches and weighs 13.12 pounds. A squeeze-activated sound module behind the head produces realistic dinosaur roars. Curved wooden rails provide a controlled, gentle rocking motion. The rich blue color enhances any playroom. Assembly is required. CPSIA compliant.

Green, 7.1' H x 3.3' W x 6.6' D

This lean-to greenhouse measures 78.75 L x 39.25 W x 84.75 H inches, offering a walk-in design for plant cultivation. The frame is constructed from galvanized steel to resist chipping and peeling, while the UV-blocking polyethylene cover controls heat and humidity. Designed to be placed against a wall for stability, it includes three tiers of wire shelving with a 22-pound weight capacity per panel. The zippered door provides full access, and the roll-up windows feature built-in screens to manage light and airflow. Anchoring stakes and guy ropes are included for added wind resistance.

This bathroom sink faucet features an oil-rubbed bronze finish over metal construction for a modern look. The 4-inch centerset deck-mount design includes two metal lever handles for precise volume and temperature control. A 360-degree swivel spout offers full sink access. It delivers a maximum flow rate of 1.2 GPM through an ABS aerator that prevents splashing. The package includes a pop-up drain and braided stainless steel supply hoses for a straightforward installation process without specialized tools.

This set of four garden trellises provides vertical growing support for climbing plants. Each unit is constructed from galvanized steel tubing with a powder-coated finish, a two-layer surface treatment that supports rust resistance for outdoor placement. The frames measure 19.7 inches wide by 71 inches high and mount via ground stakes. Round tube members combine with bird, leaf, and floral accents to reinforce the structure. Full assembly is required using pre-cut, pre-drilled components and tools not included. Clean with soap and water.

This bathroom faucet features a two-handle centerset design for 4-inch, 2- or 3-hole sink installations. The metal body with brushed gold finish and zinc lever handles offers controlled hot and cold water adjustment. A multi-mesh aerator delivers a soft, non-splashing stream at 1.5 GPM maximum flow rate. The included pop-up drain and supply hoses simplify setup. With a spout height of 6.73 inches and 4-inch spout reach, this swan-style faucet fits bathroom vanities, RVs, and hotel powder rooms.

Gray

This replacement canopy top is engineered for the Model 01-0153 gazebo frame, constructed from PA-coated polyester for effective UV resistance and weather protection. The two-tier ventilated design promotes continuous airflow, reducing wind stress and maintaining a cooler shaded area. Drainage grommets allow water to escape, preventing pooling during rainfall. Designed to fit a 9.84 x 9.84 foot frame with beveled edges; verify frame dimensions before purchase. Overall dimensions: 9.8 L x 9.8 W feet. Spot clean only for maintenance.

This 9 x 6 ft outdoor storage shed provides 109.2L x 76.8W x 75.6H inches of enclosed space, ideal for securing garden tools, lawn equipment, and pool supplies. Constructed from galvanized steel with a protective top coat, the structure resists rust and withstands year-round weather. A sloped roof design prevents water accumulation, while the included foundation kit enhances stability on a prepared base. Four ventilation slots promote cross-airflow to reduce moisture and odors. Double doors with a locking mechanism allow controlled access. Assembly requires three people and approximately four hours.