GRABO

The GRABO PRO BRUSHLESS is a cordless electric vacuum lifter for tile, stone, glass, panels and plank flooring. Its brushless pump pulls suction faster, runs longer on a charge and wears more slowly than a brushed pump. It lifts up to 375 lb (working load limit 265 lb) and holds the seal automatically. The large display shows vacuum pressure, with fine suction adjustment for thin glass and delicate tile. A wireless remote is built in, with control from up to 100 feet away. Powered by the GRABO 20V battery system. The kit includes the tool with integrated wireless remote, a GRABO 20V 2.6Ah battery, a 20V charger, a foam protector, a spare filter, the operator's manual and a canvas carrying bag.

The GRABO PRO BRUSHLESS cordless electric vacuum lifter, tool only, for anyone who already runs the GRABO 20V battery system. The brushless pump pulls suction faster, runs longer on a charge and wears more slowly than a brushed pump. It lifts tile, stone, glass, panels and plank flooring up to 375 lb (working load limit 265 lb) and holds the seal automatically. The large display shows vacuum pressure, with fine suction adjustment for thin glass and delicate tile, and a wireless remote is built in. Battery and charger are not included: use a GRABO Pro Brushless 20V battery (sold separately) or the packs you already own. A good second lifter for a crew where batteries move between tools.

The GRABO PRO is the workhorse of the GRABO range: a portable cordless electric vacuum lifter with a 20 liter per minute pump. More flow means a faster grab and a better hold on marginal surfaces. A digital pressure gauge shows exactly what the seal is doing, and automatic sensors cycle the pump on and off to keep the vacuum constant, so the lifter keeps itself tight without you watching it. It lifts tile, stone, glass, board and panels up to 375 lb (working load limit 265 lb), material that would otherwise need two people or a strap. The kit includes the GRABO PRO vacuum lifter with digital pressure gauge, one Li-ion battery, a battery charger, a foam rubber seal preinstalled on the tool, a rugged nylon carrying bag, replacement filters and the user manual, packed in a full-color box. Prefer a hard case? The same lifter is sold as the GRABO PRO with Hardshell Case.

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. The GRABO RockSeal is built for the surfaces that defeat everything else. This patented seal grips extremely textured, uneven and hard material with a surface profile of up to 10mm, where a standard gasket cannot make proper contact. Split-face stone, rough concrete, exposed aggregate and heavily textured pavers are the everyday targets. The seal deforms into the profile of the surface and holds a working vacuum, turning your vacuum gripper into a tool that works on the material you actually have rather than the one in the brochure. Fits the GRABO range. If textured stone is slowing your crew down, this is the single accessory that changes the day, and it is a large part of why these GRABO gripsters and vacuum lifters end up on hardscape sites in the first place. Fit it in place of the standard Type A1 seal and the same gripper handles surfaces that stop an ordinary vacuum lifter dead. Product details SKU RK23001 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. The GRABO U-HOIST is a rigid steel bar that takes up to four GRABO tools and turns them into a single crane or forklift attachment for very large material. When one suction gripper is not enough, the U-Hoist spreads the load. Evenly distributed hook points let you place four GRABO grippers across the width of a slab or panel so the material stays flat through the lift, which is what stops big pieces warping, cracking or bending when the weight is taken at a single point. Attach it to a crane or forklift and heavy slabs move without a hand on them. Four GRABO gripsters, one bar, and a slab that would need a crew moves in one lift. This is where the GRABO vacuum lifters step out of hand-tool territory and into rigging. The bar itself does no lifting, the grippers do, which is why the U-Hoist scales with whatever gripsters you already own. *GRABO tools are not included in this set. Accessories manufactured or sold by GRABO, including third-party accessories, are engineered specifically for GRABO tools and mounting systems. They are not compatible with the DeWalt GRABO. Product details SKU GRAB-UH-V1 Brand GRABO Condition New

This is a replacement battery for GRABO suction gripsters. It is not a suction gripster on its own. The official 20V (18V EU) 2.6Ah pack for the GRABO PRO BRUSHLESS, the same battery that ships with the tool. Consistent output, compact size, and enough capacity to keep the suction gripper cycling through a working day. A second pack is the simplest upgrade you can make to any cordless vacuum lifter: one on the tool, one on the charger, no downtime. Sold separately as a backup or replacement. It is part of the 20V system, so it also suits other 20V GRABO gripsters. The HIGH FLOW takes the larger 5.2Ah pack, and the Nemo GRABO and PRO Lifter 20 lifters use the older 14.8V battery. Product details SKU TB33000 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. The GRABO Lifting Strap turns a sealed GRABO into a hands-free carry. Clip each end into any two of the four metal anchor points on the tool, sling the strap over your shoulder, and easily move plywood, sheet goods, drywall, tile, glass, and other sheet goods across the shop or job-site. Double up with a team member and easily move large and heavy appliances. It fits GRABO tools that have the four external anchor points. *Note: Grabo Tool is not included.

This is a third-party accessory made for GRABO suction gripsters. It is not a suction gripster on its own. Stop bending over to place a tile. The ERGUO S1 is an extension arm that turns any GRABO gripper into a stand-up tool, raising the working height so your back stays straight through a full day of flooring, paving or panel work. It clamps to the tool and gives you a long, rigid reach, which means the vacuum lifter goes down to the floor and you do not. On repetitive installs, where you set and lift hundreds of pieces, that one change is the difference between finishing the day sore and finishing it fine. The S1 fits across the GRABO range of suction grippers, gripsters and vacuum lifters. This kit includes: Erguo S1 extension arm Attachment components for seamless integration with GRABO Instruction manual for easy setup and use *Note that the GRABO tools are not included in this set. Not compatible with the GRABO PRO BRUSHLESS. Accessories manufactured or sold by GRABO, including third-party accessories, are engineered specifically for GRABO tools and mounting systems. They are not compatible with the DeWalt GRABO. Product details SKU ERG-S1 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. A replacement remote for the GRABO PRO BRUSHLESS, in a black shell on a durable hardware frame. Inside, SMT surface-mount components and an acoustic resonator hold the frequency steady, which is what gives it stable range and very low power draw. It is paired specifically to the PRO BRUSHLESS suction gripper and will not control other models. Worth keeping a spare. Remote control is what lets you leave the gripster attached to material on a crane, a rack or a wall and still work at a distance, and a lost fob turns a remote-capable vacuum lifter back into a hands-on one. A cheap spare for one of the smartest GRABO gripsters and lifters we make. *Note: GRABO Pro Brushless is not included. Product details SKU GPB-RC Brand GRABO Condition New

This is a replacement battery for GRABO suction gripsters. It is not a suction gripster on its own. The AA battery compartment for OTTOVAC, with a green on and off switch built into the cartridge. It takes four standard AA cells, and that is the point: if you are working somewhere remote and the lithium pack is flat, batteries from any shop in the world will get the vacuum gripper running again. The switch controls the tool directly, and the compartment installs and removes without tools. A secure fit keeps the contacts steady so you do not get power dropouts mid-lift. Cheap, simple, and worth carrying as a backup for any OTTOVAC suction gripster or electric lifter. Pair it with the Li-Ion cartridge and the gripper has two independent power sources, which is more than most vacuum lifters offer. Product details SKU RK22001 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. When every other seal is too big, this is the one that still grips. At 80mm x 160mm the small oval open-cell seal lets the GRABO HIGH FLOW pick up narrow bricks, small pavers and offcut stone that a 300mm plate cannot touch. It uses the same open-cell foam as the larger oval seal, which allows the suction gripper to pull maximum air without forming a true vacuum, exactly what porous, rough-cut material requires. Small-format hardscape is where most vacuum lifters give up. This seal is why the GRABO HIGH FLOW gripster does not. Keep it in the case beside the larger oval pad and the gripper covers everything from a single brick to a full paver, which is more range than most vacuum lifters manage. Product details SKU GHF-OFS-80 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. Run your GRABO HIGH FLOW without keeping a hand on the tool. This 1500mm wired remote plugs into the control port on the gripper and puts ON and OFF at the end of a cable, so the vacuum lifter can stay down on the material while you stand upright and work. The extra length is the whole point. At 1500mm the cable comfortably reaches the grips of the ERGUO T bar and the PROBST DUO handles, which the shorter 850mm version does not, so it suits tall handle rigs and crane or excavator setups where the suction gripster hangs well below your hands. A durable rubber strap secures the remote to the included T-Bar handle or to any official or third-party attachment. Like every part in the GRABO range of grippers, gripsters and vacuum lifters, it fits in seconds and needs no tools. Product details SKU GHF-WR-1500 Brand GRABO Condition New

This is a replacement battery for GRABO suction gripsters. It is not a suction gripster on its own. The lithium-ion cartridge for OTTOVAC, and the upgrade from the AA compartment. Two single-cell 18500 li-ion cells give consistent output over a much longer runtime, and the whole cartridge recharges over USB-C, so it tops up from the same cable as everything else on the truck. Built-in protection covers overcharging and short circuits. Compact, light, and a straight drop-in fit. If your OTTOVAC suction gripper works daily, this is the version to run, with the AA cartridge kept as a backup. Suits every OTTOVAC in the range of suction gripsters and vacuum lifters. Swapping cartridges takes seconds, so the gripper never waits on a charger and a flat pack never ends a lifter's day. Product details SKU TB26000 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. Everything you need to take your GRABO HIGH FLOW into large-format work, in one bundle. The Suction Plate 300 clips onto the tool and the 12in x 12in Foam Seal 300 locks into the plate with four spring-lock pins. Together they turn the small oval base of the suction gripper into a full 300mm footprint, which is what gives you a stable, dependable grip on large, heavy and porous surfaces up to 150 lbs (68 kg). This is the standard configuration the HIGH FLOW ships in, sold as a pair so you can replace both at once or keep a second set ready to swap. Working on extremely textured pavers? Choose the SMART CUT version of the bundle instead. Fits the GRABO HIGH FLOW gripster. Not compatible with the smaller GRABO vacuum lifters. A second set is the usual move once a crew runs more than one gripster, so a torn pad never idles the gripper. Product details SKU SP300-FS300 Brand GRABO Condition New

This is a third-party accessory made for GRABO suction gripsters. It is not a suction gripster on its own. Hanging upper cabinets alone is normally a two-person job done badly by one. The GRABO Cabinet Installation Plates, designed by Izzy Swan, fix that by putting the weight on a pair of GRABO grippers instead of on your shoulder. The plates attach to your tools and give you a stable ledge to rest and position a cabinet while you level it and drive the screws. Set the height once, let the GRABO gripsters hold, and take your hands back for the work that actually needs them. Sold as a set of two, because two suction lifters holding a cabinet is what makes the job single-handed. Any GRABO gripper works, so the plates travel with whichever gripster is already in the van. Accessories manufactured or sold by GRABO, including third-party accessories, are engineered specifically for GRABO tools and mounting systems. They are not compatible with the DeWalt GRABO. Product details SKU CPI-V1 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. The heaviest-duty configuration the GRABO HIGH FLOW offers: the 400mm (16in x 16in) Suction Plate with the SMART CUT Foam Seal 400. Maximum footprint meets maximum grip. The precision-cut foam holds a seal on extremely textured and extremely porous surfaces, and the 400mm plate spreads it across enough area to lift up to 242 lbs (110 kg). Deep grooves, split faces and open aggregate all come within range. If you run one setup on this vacuum gripper, run this one. It is the combination that keeps a suction gripster useful on the materials that stop everything else. Attaches with four quick-lock pins. Fits the GRABO HIGH FLOW only, not the smaller GRABO lifters. It is the setup that gets the most out of the gripper, and the reason this gripster ends up on the roughest hardscape on site. Product details SKU SP400-FS400SC Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. Sometimes the tile does not want to move. The GRABO IMPACT PLATE is a thick, impact-resistant metal bracket that mounts to the four anchor points on your tool and gives you something safe to hit. Stuck tile, bedded stone and pavers set in thinset, glue or cement usually need a shock to break loose. Without a shield that means striking the suction gripper itself and destroying it. With one, you hammer the plate, the material breaks free, and the vacuum lifter takes the blow instead of the housing. A cheap accessory that protects an expensive vacuum gripster, on exactly the jobs where you are most likely to need one. Demolition and tear-out are the fastest way to kill a gripper, and this is the plate that keeps the gripster out of the firing line. Accessories manufactured or sold by GRABO, including third-party accessories, are engineered specifically for GRABO tools and mounting systems. They are not compatible with the DeWalt GRABO. Product details SKU GIP-V1 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. The GRABO Seam Setter V2 pulls two slabs into a flush, level joint and holds them while you set it, on porous and non-porous surfaces alike. Two adjustable knobs handle leveling and alignment, and a third opens or closes the seam itself, so you have direct control over the result rather than tapping and hoping. Stainless steel and aluminum construction takes daily heavy-duty use on stone tops. Use two setters together on a countertop slab seam for real stability across the length of the joint. Because the holding force comes from your GRABO grippers rather than a hand pump, there is no slow leak halfway through the set, which is the failure mode every fabricator knows. A natural companion to the 90 Degree Seam Setter V2 if your suction gripsters and vacuum lifters see both flat seams and corners. Two setters and two grippers is the standard fabricator setup, and the one that makes a long countertop seam behave. Works with every current GRABO gripster. *Note that the GRABO tool is not included in this set. Accessories manufactured or sold by GRABO, including third-party accessories, are engineered specifically for GRABO tools and mounting systems. They are not compatible with the DeWalt GRABO. Product details SKU GSS-V2 Brand GRABO Condition New

One suction gripper, six points of contact. The GRABO PANEL PRO is a modular large-format rail system that multiplies a single tool into up to six 8-inch suction cups, spreading the hold across a whole panel instead of concentrating it in one spot. Mount a GRABO to the control head and vacuum pressure distributes through durable polyurethane air hoses to every cup on the rail. Working together they deliver up to 441 lbs / 200 kg of total holding force, enough to move large-format tile, stone slabs, glass and countertops with real confidence. Four integrated handle grips and four rugged rubberized wheels let you roll a panel into position rather than carry it, and the rubberized handles let you stand material upright safely for tasks like applying thinset. When it is time to let go, one GRABO gripster controls the vacuum across all six cups, so release is fast and even. This is what turns a handheld suction lifter into a large-format transport system. Runs on one or two GRABO tools. The rail is the multiplier: your grippers supply the vacuum, the cups supply the spread, and a panel no single gripster could hold moves like a much smaller piece. *Note that the GRABO tool is not included in this set. Product details SKU GPP-V1 Brand GRABO Condition New

The GRABO PRO cordless electric vacuum lifter, packed in a hardshell case for the truck bed, trailer or site container. It lifts tile, stone, glass, panels and plank flooring up to 375 lb (working load limit 265 lb). A 20 liter per minute pump, a digital pressure gauge and automatic sensors cycle the vacuum on and off to keep the seal tight. The case protects the tool against crushing, dust, debris and weather. The kit includes the GRABO PRO vacuum lifter with digital pressure gauge, one Li-ion battery, a battery charger, a foam rubber seal preinstalled on the tool, replacement filters, the user manual and the hardshell case.

The GRABO V2 builds on the trusted performance of the original NEMO GRABO vacuum gripster with thoughtful upgrades that make a real difference on the job. It still uses the same internal motor, digital pressure gauge, 14.8V battery, and bottom foam rubber seal you're familiar with, so your existing parts and accessories still work. But now it includes the slimmer ergonomic handle from the GRABO PRO for improved comfort during all-day use, and the enhanced pressure release button for more controlled material release. A new row of five LED lights shows battery level at a glance, and most importantly, all three buttons, power, motor, and pressure release, are now protected with full rubber covers, preventing dust, debris, and water from seeping inside. If you rely on your GRABO in tough conditions, the V2 gives you everything you loved, just stronger, cleaner, and smarter.

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. The GRABO 90 Degree Seam Setter V2 turns a pair of GRABO tools into a right-angle clamping system. Grip both faces, bring them together, and set granite, marble, tile, stone, wood or metal at a precise level and angle without a second person holding anything. Six 5mm bolts lock the setter into the metal anchor points on the base plate of each GRABO gripper, and eight 4mm bolts secure the angle joint. The rails invert, so inside corners are handled with the same hardware as outside ones. Two suction gripsters, one setter, and the joint stays exactly where you put it while the adhesive grabs. That is the whole argument for using vacuum lifters instead of clamps: the holding force lands on the face of the material, not on its edges. The V2 hardware is what lets this setter hold an angle that clamps cannot, and it works with any pair of GRABO grippers or gripsters. *Note that the GRABO tool is not included in this set. Accessories manufactured or sold by GRABO, including third-party accessories, are engineered specifically for GRABO tools and mounting systems. They are not compatible with the DeWalt GRABO. Product details SKU GSS-90-V2 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. Control your GRABO HIGH FLOW from up to 30 meters away. The wireless receiver plugs into the control port on the tool and the keyfob handles ON and OFF from a distance, so you never need a hand on the suction gripper to run it. That single change opens up work a handheld tool cannot do: hang the HIGH FLOW from a crane, an excavator or any lift system, grip a porous paver, move it into place and release it, all from where you are standing. For crews doing repetitive hardscape placement, remote operation is the difference between a suction gripster that helps and one that changes the job. No cable to snag, no reaching under a slab. Fits the GRABO HIGH FLOW. Wired 850mm and 1500mm remote cables are available if you prefer a physical link to your vacuum lifters. It is the accessory that most changes what the tool is, turning a handheld suction gripper into a rig-mounted electric lifter. Product details SKU GHF-RC-V1 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. Keep both hands on the job and leave the GRABO HIGH FLOW to hold the load. The 850mm wired remote connects to the control port on the tool and switches the suction gripper on and off from the end of a cable, so you are not reaching across a paver every time you want to release. Strap it to the included T-Bar handle, or to any official or third-party attachment, with the supplied rubber strap. This is the standard length for everyday paver and slab handling with the HIGH FLOW vacuum lifter. Note: the 850mm cable does not reach the handle grips of the ERGUO T or the PROBST DUO handles. Choose the 1500mm cable for those setups. One cable, one port, and your suction gripster is under control at arm's length. Fits every HIGH FLOW vacuum lifter, and it sits alongside the wireless keyfob in our range of parts for GRABO grippers and lifters. Product details SKU GHF-WR-850 Brand GRABO Condition New

This is a battery charger for GRABO suction gripsters. It is not a suction gripster on its own. The travel charger for the 14.8V GRABO battery, with interchangeable adapters for plug types worldwide. If your suction gripper crosses borders, or you simply want a second charger that lives in the van, this is the compact option. Lightweight, quick, and sized to disappear into a tool bag rather than take up a compartment. Charges the 14.8V pack used by the Nemo GRABO and GRABO PRO Lifter 20 vacuum lifters. The HIGH FLOW and PRO BRUSHLESS gripsters run on the 20V system and need their own charger, so check which of your GRABO lifters this one feeds before you order. Product details SKU RK13017 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. A clogged filter is the most common reason a vacuum gripper stops pulling its rated hold. This replacement filter for the GRABO HIGH FLOW swaps out in seconds and restores full suction. Hardscape and landscape work is filthy by nature. Stone dust, sand and mud get drawn straight at the intake, and once the element is packed the pump works harder for a weaker grip. Keeping a couple of spares in the case is the cheapest insurance there is for a tool that holds hundreds of pounds. Fits the GRABO HIGH FLOW suction gripster and lifter only. Filters are the cheapest wear part on any of our electric vacuum grippers, so keep a handful in the case. A fresh filter is the fastest fix there is when a vacuum gripster starts to feel weak. Product details SKU RK20004 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. The all-in-one 300mm kit for the GRABO HIGH FLOW, built for the rough stuff. You get the 300mm (12in x 12in) Suction Plate paired with the SMART CUT Foam Seal 300. The plate clips to the tool with four spring-lock pins and the precision-cut foam does the rest, gripping extremely textured and extremely porous pavers that would leak past a plain seal. Rated to hold up to 150 lbs (68 kg). It is the configuration most hardscape crews end up running, because it is the one that keeps the suction gripper working on split stone and coarse aggregate rather than only on smooth slabs. For bigger and heavier material, step up to the 400mm plate and seal for 242 lbs (110 kg). Fits the GRABO HIGH FLOW gripster, one of the strongest vacuum lifters we build. If your work is mostly smooth slab rather than split stone, the plain Foam Seal 300 bundle is the cheaper pairing for the same gripper and gripster setup. Product details SKU SP300-FS300SC Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. The Foam-Rubber Seal Type A1 is the reason a GRABO grips material other suction cups will not touch. This patented, high-friction, closed-cell rubber gasket conforms to heavily textured surfaces and holds a tight vacuum where a rigid cup would simply leak. It fits every GRABO model, keeps dust and debris out of the tool, and is what turns a standard suction gripper into a lifter that works on real jobsite materials rather than polished showroom samples. Your gripster shipped with one already installed. These are replacements, and a seal is a wear part: nick it on a slab edge or wear it thin on abrasive stone and the whole tool underperforms. Keep a spare with the vacuum lifters in your kit and a damaged gasket costs you a minute instead of a day. No other single part changes what these vacuum gripsters and lifters can pick up. Product details SKU RK13001 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. The GRABO Slender Seal is for material a standard gasket cannot hold: long, narrow or awkwardly shaped pieces where a round seal has nowhere to sit. At 4 inches wide with a longer, slimmer profile, it grips plank tile, wooden beams, pipe and cut-to-size countertop safely. The shape maintains strong suction while giving you better balance and control than trying to center a wide suction gripper on a narrow piece. Rated to a maximum lifting capacity of 132 lb (60 kg) . Built for daily professional use, and a practical upgrade for contractors and DIY users whose vacuum lifters spend time on narrow stock. One of the most useful seals in the range if your GRABO gripster handles plank format. A standard round seal has nowhere to sit on a narrow plank, which is where most vacuum lifters stop and this gripper does not. Product details SKU RK23002 Brand GRABO Condition New

This is a replacement battery for GRABO suction gripsters. It is not a suction gripster on its own. A spare battery is what keeps a vacuum gripper working through the afternoon instead of sitting on the tailgate. This 14.8V lithium-ion pack is the official replacement for the Nemo GRABO and the GRABO PRO Lifter 20. The 4-cell, 2600mAh pack gives roughly 1.5 hours of runtime and charges in about 2 hours, so one on the tool and one on the charger covers a full shift on either suction gripster. Working time on full charge: 1.5 hours Charge time: 2 hours Suits the Nemo GRABO and GRABO PRO grippers and lifters. Note that the HIGH FLOW and PRO BRUSHLESS run on the newer 20V system instead. Product details SKU TB05000 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. Hold it, hands free. The GRABO VersaMount is a mounting platform that clamps to your tool and gives you an adjustable ledge on any wall or vertical surface. The suction gripper does the hard part. Stick two GRABO tools to a wall, fit the VersaMount, and you have a solid, level shelf to rest cabinets, shelving, picture frames, drywall and more while you fix them in place. Height is adjustable and leveling is done by hand, with no extra tools and no pencil marks that turn out to be wrong. For installers it replaces the second person whose whole job was holding one end. For DIY users it removes the worst part of hanging anything heavy. Either way it is the accessory that best shows what suction gripsters and vacuum lifters can do when they are not lifting at all. Two grippers, one platform, and a wall becomes a workbench. Note that the VersaMount needs a pair of gripsters, not one. Note: two GRABO tools required. GRABOs not included. Product details SKU GVM-V1 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. The GRABO ATTACHMENT PLATE locks into the four metal anchor points on your tool and adds a mounting surface with multiple threaded ports. Lights, cameras, phones, laser levels, microphones and more all bolt straight on. The trick is what the tool does underneath. Stick the vacuum gripper to a wall, a window, a vehicle panel or a sheet of glass, and whatever you mounted stays exactly there, hands free. A suction gripster becomes a tripod, a light stand or a second set of hands on any smooth surface, in about five seconds. Fits across the GRABO range of grippers and lifters. It is also the base that several other accessories build on, so it tends to be the first upgrade people make to a gripster. Accessories manufactured or sold by GRABO, including third-party accessories, are engineered specifically for GRABO tools and mounting systems. They are not compatible with the DeWalt GRABO. Product details SKU GAP-V1 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. Standard size, maximum air flow. This oval open-cell seal matches the original base of the GRABO HIGH FLOW, no plate required, and it is the right choice when the material is too small for a 300mm or 400mm suction plate. The open-cell foam is the important part. Closed-cell foam seals by going airtight; open-cell foam deliberately lets air pass through it, which is what the HIGH FLOW needs. The tool is built to out-flow a leak rather than eliminate it, so on porous brick and textured stone this seal grips where an airtight gasket would fight the pump. That is the difference between this suction gripster and an ordinary vacuum lifter. Rated to hold up to 75 lbs (34 kg). The go-to seal for smaller pavers, bricks and rough surfaces on the GRABO HIGH FLOW gripper. Step up to a 300mm or 400mm plate and seal when the material outgrows what this gripster and lifter combination covers. Product details SKU GHF-OFS Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. The GRABO TILE VIBRATION attachment locks onto the anchor points on your tool and adds two power vibration settings, so you can settle tile and flooring into thinset or mortar without a mallet and without guesswork. Grip the tile with the suction gripper, place it, and let the vibration bed it evenly into the adhesive. Coverage improves, lippage drops, and you get a professionally set piece faster and with far less effort than tapping it down by hand. It is one of the attachments that shows why these tools are worth more than their lifting spec. A GRABO is a vacuum gripster, an electric lifter and, with this fitted, a setting tool. Large-format tile is where it earns its keep, because a big piece needs even bedding and a gripper holding the center. Fits any GRABO gripster with the standard anchor points. *Note that the GRABO tool is not included in this set. Accessories manufactured or sold by GRABO, including third-party accessories, are engineered specifically for GRABO tools and mounting systems. They are not compatible with the DeWalt GRABO. Product details SKU GTV-V1 Brand GRABO Condition New

OTTOVAC DIGITAL is a compact electric vacuum lifter for glass, tile and smooth panels, with a digital display. It handles like a traditional suction cup, but a built-in motor pulls air automatically and holds safely up to its 230 lb safe working load. The bright display shows live pressure in psi or bar and a running estimate of the cup's safe weight capacity, so you read what it is holding instead of guessing. Metal anchor points accept GRABO and third-party attachments for lifting, leveling, setting and holding. Compact 7.9 x 7.9 in footprint, 2.6 lb with battery. Not for climbing or supporting a person, and not for glass thinner than 6 mm.

This is a replacement battery for GRABO suction gripsters. It is not a suction gripster on its own. The official 20V (18V EU) 5.2Ah pack for the GRABO HIGH FLOW, the biggest battery in the range because the HIGH FLOW is the hungriest vacuum gripper in it. Moving 1.5 cubic meters of air per minute takes real current, and the 5.2Ah cell is sized to keep that suction gripster running through a paving shift rather than an hour of it. One pack ships with the tool. A second is what stops the afternoon going quiet. Sold separately as a backup or a replacement. Compatible with the HIGH FLOW vacuum lifters only. The PRO BRUSHLESS takes the 2.6Ah pack from the same 20V system, and the Nemo GRABO and PRO Lifter 20 use the older 14.8V battery. Check which pack your gripper takes before ordering, because the three GRABO battery systems do not interchange across the range of lifters. Product details SKU TB21000 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. The full 400mm upgrade for the GRABO HIGH FLOW: the 400mm (16in x 16in) Suction Plate with its matching Foam Seal 400, bundled together. Four quick-lock pins attach it to the tool and the larger footprint takes rated capacity from 150 lbs (68 kg) up to 242 lbs (110 kg). Large, heavy and porous material that felt marginal on the 300mm plate becomes a routine lift. This is the bundle for hardscape and slab crews who bought the suction gripster for its power and want to use all of it. The standard foam seal suits flat and porous surfaces; if your pavers are extremely textured, choose the SMART CUT 400 bundle instead. Fits the GRABO HIGH FLOW, the strongest of our vacuum lifters. Foam is a wear part on all these vacuum grippers, so add spares. With the 400 fitted, the 300mm plate becomes the light-duty option and one gripster covers both ends of the job with a single lifter. Product details SKU SP400-FS400 Brand GRABO Condition New

OTTOVAC is a portable electric vacuum lifter for glass, tile and any other smooth, flat, non-porous material. It looks like a suction cup and works like a power tool: a built-in pressure sensor starts and stops the pump automatically to keep the grip constant, so there is no pumping and no quiet loss of suction. Safe working load 230 lb. Red and green LED shows battery level. Fully electric, powered by the included lithium-ion rechargeable battery cartridge or by the included cartridge for 4 AA batteries. Compact 7.9 x 7.9 in footprint, 2.6 lb with battery, ships in a fitted case. Not for climbing or supporting a person, and not for glass thinner than 6 mm.

The GRABO HIGHFLOW is a cordless electric vacuum lifter built for porous material that defeats ordinary suction lifters: rough concrete, split stone, coarse pavers and open-grain timber. Instead of trying to seal a porous surface, its pump moves 1,500 liters of air per minute, more than the material can leak, so it holds where a conventional vacuum lifter slides off. Holds up to 150 lb with the included 300 mm suction plate and up to 242 lb with the optional Suction Plate 400. Pistol grip, four power settings and an analog pressure gauge. The kit includes the GRABO HIGHFLOW tool, a 300 mm suction plate with Smart Cut foam seal, two GRABO HIGHFLOW 18V 5.0Ah batteries, a battery charger, a T-bar handle with wired remote on/off cable, a spare 300 mm foam seal, an extra filter, the operator's manual and a canvas carrying case.

This is a third-party accessory made for GRABO suction gripsters. It is not a suction gripster on its own. The GRABO ERGUO S2 combines two upgrades in one: a versatile attachment plate that lets you mount almost anything to your GRABO, and a long extension arm with the controls built into the handlebar. Together they let you run the vacuum gripster from standing height, without bending down to touch the tool at all. Four quick-lock pins snap the plate onto a NEMO GRABO, GRABO PRO or GRABO PRO BRUSHLESS, and the multiple mounting positions let you set the balance point to suit the slab you are moving. Trigger the vacuum, place the piece, release, repeat, all from upright. Let the suction lifter and the arm carry the load instead of your back. If you already own one of the GRABO grippers, the S2 is the accessory that changes how a long install day feels. It works with the Nemo GRABO, PRO and PRO BRUSHLESS suction grippers, so it moves between vacuum lifters as your kit grows. *Note that the GRABO tool is not included in this set. Accessories manufactured or sold by GRABO, including third-party accessories, are engineered specifically for GRABO tools and mounting systems. They are not compatible with the DeWalt GRABO. Product details SKU ERG-S2 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. The 400mm (16in x 16in) suction plate for the GRABO HIGH FLOW, and the single biggest capacity upgrade available for the tool. Four quick-lock pins attach it in seconds. The larger surface area lifts rated capacity from the 300mm plate's 150 lbs (68 kg) up to 242 lbs (110 kg), which is what large, heavy, flat and extremely porous pavers need. Built for professionals who bought a powerful suction gripper and expect to use its full range. The plate is modular and takes either the standard Foam Seal 400 for general porous lifting or the SMART CUT Foam Seal 400 for extremely textured surfaces. Please note, this item is the suction plate only. Foam seals are sold separately, or choose one of the Suction Plate 400 bundles to get both together. Fits the GRABO HIGH FLOW gripster. Not compatible with the other GRABO vacuum lifters. It is the biggest footprint any of our grippers can carry, and the reason the HIGH FLOW gripster outlifts every other tool in the range. Product details SKU SP400 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. The standard suction plate for the GRABO HIGH FLOW: 12in x 12in (300mm), rated to 150 lbs (68 kg). It attaches to the tool with four spring-lock pins and takes any 300mm seal, so you can run the standard Foam Seal 300 for general lifting and swap to the SMART CUT Foam Seal 300 when the pavers turn rough. That modularity is what lets one suction gripper cover both jobs. Please note, this item contains the suction plate only. No foam seals are included. To buy the plate and a seal together, see the Suction Plate 300 bundles on the store page. Fits the GRABO HIGH FLOW gripster. For heavier material the 400mm plate takes the same lifter to 242 lbs (110 kg), and it is the simplest upgrade across our vacuum gripsters and lifters. Product details SKU SP300 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. The GRABO 90 Degree Seam Setter brings two pieces together at a true right angle and holds them there while you set the joint. It works on porous and non-porous surfaces alike, which is what separates a setter built around a vacuum gripper from a plain suction cup. Kitchen islands, countertop returns, shower corners and large-format walls are the everyday jobs for it. Granite, stone, marble, metal and similar slab materials all hold fine. Used in pairs it becomes a proper alignment system, and because the holding force comes from your GRABO gripsters and electric lifters there is no pumping and no slow leak halfway through a set. Two grippers make it a full alignment system, one makes it a very steady third hand. Fits any GRABO gripster with standard anchor points. Accessories manufactured or sold by GRABO, including third-party accessories, are engineered specifically for GRABO tools and mounting systems. They are not compatible with the DeWalt GRABO. Product details SKU GSS-90 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. This is the standard foam seal that ships in the GRABO HIGH FLOW kit, sold separately as a replacement. It is a 12in x 12in uncut pad that clips onto the 300mm suction plate in seconds, and it is the right choice for general lifting on flat and porous surfaces, holding up to 150 lbs (68 kg). Foam is a consumable on any vacuum gripper. Abrasive pavers chew through it, and a compressed or torn seal quietly costs you holding power long before it fails outright. Keep two or three spares in the bag so your GRABO gripster is never the reason you stop. Fits the GRABO HIGH FLOW suction lifter with the Suction Plate 300. For extremely textured pavers, the SMART CUT version of this seal keeps the gripster gripping where a plain pad lets a porous surface beat the gripper. Product details SKU FS300 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. The GRABO Remote pairs with your tool and puts the pump controls in your hand: on, off and release, without touching the vacuum gripper itself. That matters more than it sounds. Once the vacuum lifter is attached to a slab hanging from a crane, a panel held against a ceiling, or a pane of glass at the top of a ladder, being able to release it from a safe distance changes which jobs you can do on your own. Pairs with the GRABO gripsters it supports and fits in seconds. One small fob, and a handheld vacuum gripper becomes a remote-controlled electric lifter. Pick one up and GRAB-ON. Product details SKU GR-V1 Brand GRABO Condition New

This is an accessory for GRABO suction gripsters. It is not a suction gripster on its own. More surface area, more hold. The Foam Seal 400 pairs with the GRABO Suction Plate 400 to take your HIGH FLOW vacuum lifter from 150 lbs (68 kg) up to 242 lbs (110 kg) of rated capacity. At 400mm (16in x 16in) it spreads the vacuum across a much larger footprint, which is exactly what large, heavy, flat and extremely porous pavers need. Four quick-lock pins hold it to the plate and it changes over in seconds. Hardscape crews are the reason this seal exists. When the material is big enough that a 300mm suction gripper leaves you nervous, the 400 is the upgrade that makes the lift routine. Built for professionals who expect their vacuum gripsters and lifters to perform on the worst surfaces on site, not the best. Once the 400 is fitted, the standard 300mm seal stays in the bag as a spare for lighter lifter work. Product details SKU FS400 Brand GRABO Condition New