Skip to Main Content
Sign In
Sign In
Dreffco Logo

Dreffco

4.5

Rated 4.5 out of 5 stars.

Dreffco

43 Results

Sort by
Recommended
Dual Row Gas Burner Fireplace Kit with Pro Connection Kit, Silica Sand, Glowing Embers, Grate
Available in 3 Sizes and 2 Options

Dual Row Gas Burner Fireplace Kit with Pro Connection Kit, Silica Sand, Glowing Embers, Grate

by Dreffco

2.5" H x 30.25" W x 6.5" D
$389.99$549.99

Rated 5 out of 5 stars.1 total votes

Free shipping

Our Powder Coated HD Fireplace Steel Dual Row burner kit is complete with everything you need to start or refresh your indoor or outdoor fireplace or fire pit project. First we start with HD high grade steel and powder coat it black for additional longevity. With two rows of burners you will fill your fireplace or fire pit with flames. Our connection kit is assembled using matching components to assure the best performance. We start with our 10" x 3/8" Non-Whistle Flex line and add fittings to connect our dual flame burner to your 3/8" OR 1/2" male flare gas line coming into your fireplace. The 1/2 inch connection hub on both ends allows you to connect from either side. We add Premium Silica Sand to this deluxe kit to cover the burner ensuring there is no audible sounds from the burner. Lastly, we included a solid steel log grate with steps in the back to elevate the rear log. Just place your existing logs on the log grate and your ready to go! This deluxe burner kit gives you exactly what you want, the tallest and best looking flames! We recommend that all gas products be installed and serviced by certified NFI or WETT professionals.

  • Measure Twice and Purchase Once! Sizes are relative to log dimensions.
  • HIGH HEAT OUTPUT: 18"-80,000 BTU, 24"-90,000BTU, 30"-100,000 BTU
  • EASY INSTALL: Everything Included to replace your old burned out vented gas log burner with a new dual row burner.
  • INCLUDES! Bonus Bag of Glowing Embers!
Opens in a new tab
3 Pack Heavy Duty Stainless Steel Flexible Fire Pit Burner Support Flange Installation

3 Pack Heavy Duty Stainless Steel Flexible Fire Pit Burner Support Flange Installation

by Dreffco

$105.99$129.99

Free shipping

Our 18" long fire pit collars are just the answer when trying to figure out how to mount your fire pit burner into your new square, rectangular or round fire pit. The heavy-duty stainless flange collars can be bent to fit just about any configuration fire pit. The flange allows for up to 3 1/2 inch of adjustment between your burner and side wall. After you build your "structure" you can attach our installation flange with screws or masonry screws to the inner wall of your fire pit. They can be installed with the flange on top or on the bottom. They are strong enough to support not only your burner but your fire glass, lava rocks, gas logs or whatever media you plan on using. Each piece is 18" long. It takes 3 to make a 18" circle, 4 to make a 24" circle, 5 to make a 30" circle and 6 to make a 36" circle. We recommend all gas products be installed and serviced by professionals that have been certified by the NFI or WETT.

  • Our Flexible Support Flange Makes It Easier Than Ever To Build Your Fire Pit And Support Your Gas Burner At Any Height!
  • Each Flexible Installation Flange Measures 18" L x 2" H x 2" D
  • Our Design Is Flexible Enough to Bend Into The Curvature Of Your Fire Pit
  • With 5/16 inch Mounting Holes Every 1 7/8 inches Along The Entire Length, It Is Strong Enough To Support Your Burner & Fire Glass!
  • Pack of 3 Heavy-Duty 440 Stainless Steel Flanges (Recommended for an 18" +- Diameter Circle)
Opens in a new tab
Heavy-Duty NG Natural Gas Dual Row Fireplace Burner with Deluxe Connection Kit, Silica Sand, Glowing Embers
Available in 3 Sizes

Heavy-Duty NG Natural Gas Dual Row Fireplace Burner with Deluxe Connection Kit, Silica Sand, Glowing Embers

by Dreffco

16" H x 30" W x 12" D
$279.99$369.99

Free shipping

Our Powder Coated HD Fireplace Steel Dual Row burner kit come complete with everything you need to start your Natural Gas (NG) indoor or outdoor fireplace or fire pit project. First we start with HD high grade steel and powder coat it black for additional longevity. With two rows of burners you will fill your fireplace or fire pit with flames. Our connection kit has been assembled using matching components to assure the best performance. We start with our 10" x 3/8" Non-Whistle Flex line and add fittings to connect our dual flame burner to your 3/8" OR 1/2" male flare gas stub coming into your fireplace. The 1/2 inch connection hub on both ends allows you to connect from either side. Lastly, we have added Permium Silica Sand media to this deluxe kit to cover the burner. This will quiet the potential noise of the gas flowing through the burner. All this adds up to exactly what you are looking for in a fireplace gas flame burner; the highest possible flames! We strongly recommend that all gas products be installed and serviced by professionals that have been certified by the NFI or WETT. The installer must conform to any and all State and/or local codes.

  • High Heat Output with Prox 80,000 BTU/ 18", 90,000 BTU/ 24", and 100,000 BTU/ 30
  • Easy to install with everything Included you need to replace your old burned out vented gas log burner with a new Extra-Flame burner.
  • Includes a Bonus Bag of Glowing Embers!
Opens in a new tab
Heavy-Duty Vented Dual Row Gas Burner with Complete Fireplace Connection Kit - NG LP - Easy Install, Bonus Bag of Glowing Embers Included
Available in 6 Sizes and 2 Options

Heavy-Duty Vented Dual Row Gas Burner with Complete Fireplace Connection Kit - NG LP - Easy Install, Bonus Bag of Glowing Embers Included

by Dreffco

18" (Minimum Opening: 16"H x 26"FW x 16"BW x 24"D)
$239.99

Free shipping

Our Powder Coated HD Fireplace Steel Dual Row burner kit come complete with everything you need to start your indoor or outdoor fireplace or fire pit project. First we start with HD high grade steel and powder coat it black for additional longevity. With two rows of burners you will fill your fireplace or fire pit with flames. Our connection kit has been assembled using matching components to assure the best performance. We start with our 10" x 3/8" Non-Whistle Flex line and add fittings to connect our dual flame burner to your 3/8" OR 1/2" male flare stub coming into your fireplace. The 1/2 inch connection hub on both ends allows you to connect from either side. All this adds up to exactly what you are looking for in a fireplace flame burner; the highest possible flames! We strongly recommend that all products be installed and serviced by professionals that have been certified by the NFI or WETT. The installer must conform to any and all State and/or local codes.

  • LP or NG KITS AVAILABLE!
  • HIGH POWER- 2-Rows of burner tubes provide high heat output with approximately 90,000+ BTU's!
  • PROFESSIONAL CONNECTION KIT - non-whistle flex line, vent clip, LP mixer and connection fittings.
  • EASY TO INSTALL - everything you need to replace your burned out log burner.
  • BONUS - Free Bag of Glowing Embers!
Opens in a new tab

5 Pack Heavy Duty Stainless Steel Flexible Fire Pit Burner Support Flange Installation

by Dreffco

$143.99$189.99

Free shipping

Our 18" long fire pit collars are just the answer when trying to figure out how to mount your fire pit burner into your new square, rectangular or round fire pit. The heavy-duty stainless flange collars can be bent to fit just about any configuration fire pit. The flange allows for up to 3 1/2 inch of adjustment between your burner and side wall. After you build your "structure" you can attach our installation flange with screws or masonry screws to the inner wall of your fire pit. They can be installed with the flange on top or on the bottom. They are strong enough to support not only your burner but your fire glass, lava rocks, gas logs or whatever media you plan on using. Each piece is 18" long. It takes 3 to make a 18" circle, 4 to make a 24" circle, 5 to make a 30" circle and 6 to make a 36" circle. We recommend all gas products be installed and serviced by professionals that have been certified by the NFI or WETT.

  • Our Flexible Support Flange Makes It Easier Than Ever To Build Your Fire Pit And Support Your Gas Burner At Any Height!
  • Each Flexible Installation Flange Measures 18" L x 2" H x 2" D
  • Our Design Is Flexible Enough to Bend Into The Curvature Of Your Fire Pit
  • With 5/16 inch Mounting Holes Every 1 7/8 inches Along The Entire Length, It Is Strong Enough To Support Your Burner & Fire Glass!
  • Pack of 5 Heavy-Duty 440 Stainless Steel Flanges (Recommended for an 30" +- Diameter Circle)
Opens in a new tab

4 Pack Heavy Duty Stainless Steel Flexible Fire Pit Burner Support Flange Installation

by Dreffco

$124.99$159.99

Free shipping

Our 18" long fire pit collars are just the answer when trying to figure out how to mount your fire pit burner into your new square, rectangular or round fire pit. The heavy-duty stainless flange collars can be bent to fit just about any configuration fire pit. The flange allows for up to 3 1/2 inch of adjustment between your burner and side wall. After you build your "structure" you can attach our installation flange with screws or masonry screws to the inner wall of your fire pit. They can be installed with the flange on top or on the bottom. They are strong enough to support not only your burner but your fire glass, lava rocks, gas logs or whatever media you plan on using. Each piece is 18" long. It takes 3 to make a 18" circle, 4 to make a 24" circle, 5 to make a 30" circle and 6 to make a 36" circle. We recommend all gas products be installed and serviced by professionals that have been certified by the NFI or WETT.

  • Our Flexible Support Flange Makes It Easier Than Ever To Build Your Fire Pit And Support Your Gas Burner At Any Height!
  • Each Flexible Installation Flange Measures 18" L x 2" H x 2" D
  • Our Design Is Flexible Enough to Bend Into The Curvature Of Your Fire Pit
  • With 5/16 inch Mounting Holes Every 1 7/8 inches Along The Entire Length, It Is Strong Enough To Support Your Burner & Fire Glass!
  • Pack of 4 Heavy-Duty 440 Stainless Steel Flanges (Recommended for an 22"-24" +- Diameter Circle)
Opens in a new tab

6 Pack Heavy Duty Stainless Steel Flexible Fire Pit Burner Support Flange Installation

by Dreffco

$162.99$209.99

Free shipping

Our 18" long fire pit collars are just the answer when trying to figure out how to mount your fire pit burner into your new square, rectangular or round fire pit. The heavy-duty stainless flange collars can be bent to fit just about any configuration fire pit. The flange allows for up to 3 1/2 inch of adjustment between your burner and side wall. After you build your "structure" you can attach our installation flange with screws or masonry screws to the inner wall of your fire pit. They can be installed with the flange on top or on the bottom. They are strong enough to support not only your burner but your fire glass, lava rocks, gas logs or whatever media you plan on using. Each piece is 18" long. It takes 3 to make a 18" circle, 4 to make a 24" circle, 5 to make a 30" circle and 6 to make a 36" circle. We recommend all gas products be installed and serviced by professionals that have been certified by the NFI or WETT.

  • Our Flexible Support Flange Makes It Easier Than Ever To Build Your Fire Pit And Support Your Gas Burner At Any Height!
  • Each Flexible Installation Flange Measures 18" L x 2" H x 2" D
  • Our Design Is Flexible Enough to Bend Into The Curvature Of Your Fire Pit
  • With 5/16 inch Mounting Holes Every 1 7/8 inches Along The Entire Length, It Is Strong Enough To Support Your Burner & Fire Glass!
  • Pack of 6 Heavy-Duty 440 Stainless Steel Flanges (Recommended for an 36" +- Diameter Circle)
Opens in a new tab
ServerT:3.3835370540619