Versatile dual monitor stands for cost-conscious buyers. Fluid tilt angle adjustment is 45° up or down for each VESA bracket, and each monitor can be rotated independently between portrait and landscape modes. The swivel feature allows for easy screen sharing.
- : 17.6lb.
- : 18.3'' H x 15.3'' W x 11'' D
- : 32''
- : Desk mount
I bought my MI-2781 a month ago, love it and recommend it to my fellow engineers working from home. It is a great product for the price. I was concerned the weight of my two 24" DELL monitors would make the free standing V base front heavy and front tipsy. This has not been an issue. The moment arm distance from the center of the vertical post to the front fulcrum line of the V base is about 8" and the center of mass of my 2 monitors is about 5.5". See my attached diagram. It would be helpful if the Mount-It website would include the 8" forward moment arm length in their diagram.
I did have an issue with the MI-2781A Installation Manual which I suspect is common for most Dell monitors. Step 5 of cannot be performed after step 4 because the VESA mount on the back of my Dell monitors is recessed about a quarter inch. In other words, it uses a carpenter's mortise and tenon joint. This is common to most of the Dell monitors I have used. After the VESA compatible plate is attached to the monitor per step 4, there is simply not enough clearance to perform step 5.
Instead, I had to do the following.
- undue step 4 (remove the plate from the back of my monitor),
- perform step 5 (attach the 2 plates to the arms),
- new step (lay both monitors face down on the floor),
- perform step 4 (attach the VESA compatible plates to the back of the two monitors),
- new step (lift and set the entire V-base assembly on my desk),
- then continue with installation step 6.. Anonymous. Illinois. 2023-02-01 01:48:04