Penny Porcelain Mosaic Tile

Features

• Breaking strength: 250 lbs
• The mesh backing on this tile has minimal glue to allow greater thin-set coverage. To prevent the mosaics from falling off the mesh, keep the sheets as dry as possible while cutting. If necessary, place light clear adhesive tape over the sheet while cutting to avert water. Install full sheets as much as possible. Fully embed 1/3 thickness of the tiles into the premium modified thin-set. Images and product samples are representative of a product’s potential characteristics. There is no guarantee that the sample product or images will 100% match the product received. Field, mosaic, and trim tile may not be an exact match. Tiles are subject to variations in color, shade, size, surface texture, and finish. Before installation, the installer must blend tiles from several different boxes to achieve an even distribution of color range. The installer must conduct a dry mock layout under proper lighting conditions before installation. It is the consumer’s responsibility to inspect the product before installation to ensure satisfaction. Once installed, the product is deemed accepted. Check the manufacturer's specifications as some mosaic tiles may not be appropriate for wet applications. Reference the most current TCNA handbook, ANSI, manufacturer's specifications, and Bedrosian care & maintenance guide for installation, outdoor use, care, and maintenance information. Improper installation, application, use, care, and maintenance voids warranty. We reserve the right to make changes to product specifications at any time without notice.